Juki LBH-1790 (48 pages) Parts Book (PDF)
Text index — Juki LBH-1790 (48 pages)
Page 7 — 1. FRAME & MISCELLANEOUS COVER COMPONENTS (1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-04153 | UPPER COVER | 1 |
| 2 | SM-4051055-SP | SCREW | 6 |
| 3 | 400-04154 | LEFT COVER | 1 |
| 4 | SM-4051055-SP | SCREW | 2 |
| 5 | 400-04155 | LEFT_COVER_B | 1 |
| 400-04157 | THREAD TAKE-UP LEVER COVER | ||
| 400-04156 | FRONT COVER | ||
| 400-04158 | ROTOR COVER | ||
| 262 30409 | LUBRICATING OIL WICK STOPPER | ||
| SM-6040602-TP | SCREW M4 L=6 | ||
| 400-04161 | REAR COVER | ||
| 139-00956 | HOOK OIL SHIELD COVER COMPL. | ||
| SM-6050652-TP | HEXAGON SOCKET HEAD SCREW M6X6 | ||
| FIX 0033900 00 | STUD | ||
| SL-6040892-TN | SCREW | ||
| 400-05402 | HEAD FAN MOTOR A ASS'Y | ||
| SL-4042581-SC | SCREW | ||
| 400-04367 | FAN FITTING PLATE | ||
| CM-3013050-01 | SAFETY LABEL | ||
| CM 3002000 01 | ATTENTION SEAL | ||
| TA-0550604-RD | RUBBER PLUG | ||
| TA-0750404-RO | PLUG D=7.5 L=3.5 | ||
| TA-0950806-RO | RUBBER PLUG | ||
| TA-1050504-RO | RUBBER PLUG | ||
| TA 1120804 RO | RUBBER PLUG | ||
| TA 1250406 RO | RUBBER PLUG D=12.5 L=4 | ||
| TA-1550902-RO | PLUG | ||
| SM-6061002-TP | SCREW M6 L=10 | ||
| SM-6067052 TP | HEXAGON BOLT | ||
| SM-R060612 TP | SCREW M6 L=6 | ||
| 320-02354 | SWITCH ASM. | ||
| 225 25764 | PRE-TENSION CONTROLLER ASM. | ||
| 225-02504 | THREAD GUIDE BAR | ||
| 400-04160 | BED REAR COVER | ||
| HX 0015000 OA | CABLE CLAMP | ||
| 400 05403 | HEAD FAN MOTOR B ASS'Y | ||
| HM 0005500 10 | FILTER | ||
| HM 0003500 AO | FINGER GUARD | ||
| 400-06314 | HINGE BUSH | ||
| 137-00604 | HINGE PIN | ||
| 137 00400 | HINGE PLATE, A | ||
| NM 6060001 SD | HINGE PLATE, B | ||
| NM-6030001-SD | NUT M6 | ||
| WP-0612050-SD | NUT M3X0.5 | ||
| 130 43303 | WASHER 6.1X18.5X2 | ||
| 400 08977 | OIL SHIELD | ||
| 400-08978 | RUBBER C | ||
| SM 6031402 TP | RUBBER C | ||
| E2002 955 000 | SCREW | ||
| 06056-555-B00 | Z STOPPER RUBBER | ||
| 137-00703 | RUBBER CUSHION (B) | ||
| SL-6040692-TN | RUBBER HINGE | ||
| SM-1043001-SP | SCREW | ||
| B1116-804-000 | SCREW M4X0.7 L=30 | ||
| E3724-715-000 | CLOTH PLATE WASHER | ||
| TA-0850604-RO | VCS STUD A | ||
| B1150 400 000 | RUBBER PLCG | ||
| 137-05405 | RUBBER PLUG | ||
| 139-22205 | NEEDLE BAR THREAD GUIDE | ||
| SM-6050802 TP | TAKE-LP THREAD GUIDE B | ||
| 400 09037 | SCREW M5X0.8 L=8 | ||
| 400 03495 | SCREW M4 L=6 | ||
| 145 16605 | SAFETY SWITCH ASS'Y | ||
| 400-03496 | SAFETY SW BASE | ||
| 145-16500 | SAFETY SWITCH CORD ASS'Y | ||
| 236-38109 | SAFETY SWITCH COVER | ||
| 236-38307 | SAFETY SWITCH ARM | ||
| 236 38208 | SAFETY SWITCH SPRING | ||
| 236 38406 | SAFETY SWITCH NUT | ||
| SM-402:201 SC | SCREW M2 L=12 | ||
| SS-7090520-SP | SCREW 9/64 40 L= 4.5 | ||
| EA 9500001 00 | CABLE BAND | ||
| CM-3002000-03 | ATTENTION LABEL |
Page 9 — 2. FRAME & MISCELLANEOUS COVER COMPONENTS (2)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06261 | ASSY AT_SOLENOID | 1 |
| 2 | 400-06263 | AT SHAFT | 1 |
| 3 | 400-06264 | AT_SHAFT_HOLDER | 1 |
| 4 | RC 1700001 KP | RETAINING RING | 1 |
| 5 | 400-06269 | DISK STOPPER | 1 |
| 400-06271 | DISK STOPPER HOLDER CAP | 1 | |
| M9019-580-0A0 | EARTH CABLE ASM. | 1 | |
| NM 6020001 CP | NUT | 2 | |
| SM-0860400-SN | SCREW M4 L=8 | 3 | |
| SM-6040860-TP | SCREW | 1 | |
| SM-6050802-TP | SCREW M5X0.8 L=8 | 3 | |
| SM 8030412-TP | SCREW M3 L=4 | 2 | |
| SM-8030450-SP | SCREW M3 L=4 | 1 | |
| SM 8060612-TP | SCREW M6 L=6 | 1 | |
| SM-9040800-SP | SCREW | 1 | |
| WS-0410002-KP | SPRING WASHER | 1 | |
| 400-05397 | MAIN-INT CORD A ASS'Y | 1 | |
| 100-06104 | TAKE UP SPRING | 1 | |
| 400-06268 | THREAD TENSION POST BASE | 1 | |
| 400-06270 | THREAD TENSION SHAFT COLLAR | 2 | |
| 320 55402 | THRUST COLLAR | 1 | |
| 400-04252 | UTT SUSPENSION SCREW 9 | 1 | |
| 400-06265 | ASSY THREAD TENSION POST | 1 | |
| B2702-210-000 | GUIDE PLATE | 1 | |
| B2703-210-000 | BUSHING | 1 | |
| 400-03499 | THREAD BREAK DETECTOR A | 1 | |
| 400-11143 | ASSY BTW | 1 | |
| 262 60109 | BTW BASE | 1 | |
| 262 60208 | BTW CAM PLACK | 1 | |
| 262 60307 | BTW BASE SHAFT | 1 | |
| 262 60406 | BTW SHAFT BASE | 1 | |
| 262 60505 | BTW CAM LEVER | 1 | |
| 262 60604 | BTW WHEEL | 1 | |
| 400-11144 | BTW TURSION SPRING | 1 | |
| 262 60802 | BTW BEARING SPACER | 1 | |
| 400-11145 | BTW SHAFT | 1 | |
| 400-11146 | BTW LEVER SHAFT | 1 | |
| 400-21933 | BTW LEVER | 1 | |
| 262-61206 | BTW SPACER | 1 | |
| 262 61305 | BTW BEARING | 1 | |
| 262 61503 | BTW WHEEL RUBBER | 1 | |
| 262-61602 | BOBBIN SPRING | 1 | |
| 262-61701 | BTW SPRING | 1 | |
| RC-0560711-KP | RETAINING RING | 1 | |
| RE-0400000-KO | E RING 4 | 1 | |
| WP-0450826-SC | WASHER 4.5X10X0.8 | 1 | |
| SM-5040655-SN | SCREW | 1 | |
| SM-8050502-TP | SCREW M5 L=5 | 1 | |
| SM-8040802-TP | SCREW M4X8 | 2 | |
| 400-05398 | MAIN-INT CORD B ASS'Y | 1 | |
| 400 05399 | MAIN-INT CORD D ASS'Y | 1 | |
| 105 02300 | THREAD CUTTER | 1 | |
| SL-4030581-SC | COMBINATION SCREW M3 X 5 | 2 | |
| D3162-555 B00 | THREAD GUIDE | 1 | |
| SS-7110840-SP | SCREW 11/64-40 L=7.8 | 1 | |
| EA-9500B0I-00 | CABLE BAND | 10 | |
| HX-0015100-0A | CABLE BAND | 2 | |
| 262-30409 | LUBRICATING OIL WICK STOPPER | 1 | |
| SM 6040602-TP | SCREW M4 L=6 | 3 | |
| SM 6041050-SN | SCREW M4 L=10 | 3 | |
| 225-29481 | BOBBIN THREAD TENSION ASM. | 1 | |
| 110 72402 | THREAD TENSION NUT | 1 | |
| 110 93606 | THREAD TENSION SPRING | 1 | |
| B3214-047-000 | BOBBIN WINDER TENSION DISC | 2 | |
| 225-29473 | BOBBIN THREAD TENSION ROD ASM. | 1 | |
| NS 6110310-SP | NUT 11/64-40 | 1 |
Page 11 — 3. MAIN SHAFT COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-04178 | THREAD_TAKE_UP_ASM. | 1 |
| 2 | SB-1080023-00 | BEARING | (1) |
| 3 | SB-1050018-00 | BEARING | (1) |
| 4 | 400-04177 | THREAD_TAKE_UP_CRANK | (1) |
| 5 | SB-1080004-00 | BUSHING | (1) |
| 6 | 400-06311 | BUSH | (1) |
| 7 | B1908-505-000 | THREAD PASS BUSH | (1) |
| 8 | 400-04173 | LINK_TAKE_UP | (1) |
| 9 | 400-04174 | NEEDLE_BAR_CRANK | (1) |
| 10 | 400-04175 | NEEDLE_BAR_CRANK_ROD | (1) |
| 11 | B1903-552-000 | LEFT SCREW | (1) |
| 12 | SM-8040412-TP | SET SCREW M4 L=4 | (1) |
| 13 | SB-1200008-00 | BEARING | 1 |
| 14 | SB-1200020-00 | BEARING | 1 |
| 15 | SB-3070002-00 | BEARING | 2 |
| 16 | 228-91204 | BEARING SUPPORT | 2 |
| 17 | 236-05207 | BEARING HOLDER | 1 |
| 18 | 236-36400 | BOBBIN WINDER DRIVING WHEEL | 1 |
| 19 | 400-04171 | COUNTER WEIGHT_SCREW | 1 |
| 20 | 400-04170 | COUNTER_WEIGHT | 1 |
| 21 | 236-04309 | COUPLING | 1 |
| 22 | 400-28015 | AC SERVO MOTOR | 1 |
| 23 | 400-04167 | MAIN SHAFT | 1 |
| 24 | 400-04208 | NEEDLE_CRANK_SHAFT | 1 |
| 25 | SM-8081652-TP | SCREW M8 L=16 | 1 |
| 26 | SM-6041202-TP | SCREW M4X0.7 L=12 | 2 |
| 27 | SM-6052002-TR | SCREW M5 L=20 | 4 |
| 28 | SM-6062502-TP | SCREW M6 L=25 | 3 |
| 29 | 400-10434 | THRUST_COLLAR_ASM. | 1 |
| 30 | SM-8050412-TP | SCREW M5 L=4 | (2) |
| 31 | 400-10435 | THRUST_COLLAR | (1) |
| 32 | SM-8060812-TP | SCREW M6 L=8 | 6 |
| 33 | 400-04168 | SPROCKET A | 1 |
| 34 | 400-04206 | SQUARE_BLOCK | 1 |
| 35 | 400-08426 | SQUARE_BLOCK | 1 |
| 36 | 400-06307 | SQUARE_BLOCK GUIDE | 1 |
| 37 | 400-06308 | SQUARE_BLOCK_GUIDE_B | 1 |
| 38 | 400-06300 | THREAD_TAKE UP_CRANK_SHAFT | 1 |
| 39 | SS-6111440-SP | SCREW 11/64-40 L=14.0 | 2 |
| 40 | 400-04169 | TIMING_BELT | 1 |
| 41 | 400-04182 | IDLER_ASM. | 1 |
| 42 | RC-3781518-KP | RETAINING RING | (2) |
| 43 | 400-04185 | HINGE_SCREW | (1) |
| 44 | 400-04184 | IDLER_FIXED_PLATE | (1) |
| 45 | 400-04183 | IDLER_PULLEY | (1) |
| 46 | 137-10504 | INTERMEDIATE SPROCKET WASHER | (1) |
| 47 | NM-6100001-SD | NUT M10 | (1) |
| 48 | 110-50804 | FEED LEVER SPRING HOOK | (1) |
| 49 | SM-6104352-TP | SCREW M10 L=42.5 | (1) |
| 50 | SB-1100007-00 | BALL BEARING | (2) |
| 51 | WP-0621046-SP | WASHER | 1 |
| 52 | SM-9061403-CP | SCREW M6 L=14 | 1 |
| 53 | 400-04192 | ADJUSTING_SPRING | 1 |
| 54 | 400-04179 | SUSPENSION_SCREW | 1 |
| 55 | 400-11517 | NEEDLE_BAR CRANK_FELT | 1 |
| 56 | 400-08423 | WASHER | 1 |
| 57 | SM-8060612-TP | SCREW M6 L=6 | 6 |
| SM-6052502-TR | SCREW M5 L=20 | 4 | |
| SM-9061403-SP | SCREW M6 L=14 | 6 |
Page 13 — 4. HOOK DRIVING SHAFT COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | SB-1120016-00 | BEARING | 2 |
| 2 | SB-1100006-00 | BALL BEARING | 2 |
| 3 | SB-1150002-00 | BEARING | 1 |
| 4 | SB-1150015-00 | BEARING | 1 |
| 5 | 400-04188 | BEARING_SUPPORT | 1 |
| 6 | 235-36204 | BUSH | 2 |
| 7 | RC-2791218-KP | RETAINING RING | 2 |
| 8 | 400-04186 | HOOK_DRIVING_SHAFT | 1 |
| 9 | 400-04187 | HOOK_DRIVING_SHAFT_METAL | 1 |
| 10 | 137-29660 | HOOK SLEEVE ASM. | 1 |
| 11 | 137-10306 | INTERMEDIATE SPROCKET SHAFT | 1 |
| 12 | 137-10504 | INTERMEDIATE SPROCKET WASHER | 1 |
| 13 | 137-29066 | HOOK COMPL. | 1 |
| 14 | G8039-870-000 | CROWN KNOB | 1 |
| 15 | SM-8060612-TP | SCREW M6 L=6 | 10 |
| 16 | 137-82065 | HOOK COMPL.(K) | 1 |
| 17 | 145-04401 | BEARING SUPPORT | 1 |
| 18 | 400-04180 | SPROCKET B | 1 |
| 19 | 400-04181 | SPROCKET C | 1 |
| 20 | 137-10405 | INTERMEDIATE SPROCKET RING | 1 |
| 21 | 400-06317 | WASHER | 1 |
| 22 | 400-06322 | ADJUSTING SHAFT | 1 |
| 23 | 400-06312 | ADJUSTING NUT | 1 |
| 24 | SM-8080812-TP | SCREW M8X8 | 1 |
| 25 | 400-06320 | FELT | 1 |
| 26 | 236-30007 | TUBE | 1 |
| 27 | CQ-2020000-00 | OIL WICK | 1 |
| 28 | B1811-771-000 | BOBBIN | 1 |
| 29 | 137-29769 | BOBBIN CASE ASM. | 1 |
| 30 | 400-06321 | PIPE | 1 |
| 31 | 400-11355 | OIL FILTER | 2 |
| 32 | SM-8050502-TP | SCREW M5 L=5 | 2 |
Page 15
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400 05372 | FEED MOTOR ASS'Y | 1 |
| 2 | 400 05376 | FEED SENSOR ASS'Y | 1 |
| 3 | 228 91204 | BEARING SUPPORT | 2 |
| 4 | 145 09202 | THROAT PLATE BASE COVER | 2 |
| 5 | 400 04194 | MOTOR BRACKET | 1 |
| 400 05378 | FEED SENSOR ASS'Y | 1 | |
| 228 9204 | BEARING SUPPORT | 2 | |
| 400 04196 | PULLEY B | 1 | |
| 400 04197 | PULLEY C | 1 | |
| 400-04198 | SUPPORT SHAFT | 1 | |
| 400-04200 | TIMING BELT HOLDER | 1 | |
| 400 04201 | FEED SHAFT | 1 | |
| 400 04202 | FEED GUIDE SHAFT | 1 | |
| 400 04203 | FEED BASE ASM. | 1 | |
| 400 04204 | FEED BASE | (1) | |
| SB 71G0002 00 | SLIDE BEARING | (3) | |
| 400 10434 | THRUST COLLAR ASM. | 1 | |
| 400-0435 | THRUST COLLAR | (1) | |
| SM-8050412 TP | SCREW M5 L=4 | (2) | |
| 400 04205 | WORK CLAMP CARRIER | 1 | |
| SL 403108-SC | SCREW M3 X 10 | (1) | |
| SM-6040602 TP | SCREW M4 L=6 | 4 | |
| SM-6040802 TP | SCREW M4X5.7 L=8 | 2 | |
| SM-6041002 TP | SCREW M4 L=10 | 6 | |
| SM 6061002 TP | SCREW M6 L=10 | 3 | |
| SM-8050502 TP | SCREW M5 L=5 | 2 | |
| SM-8060612 TP | SCREW M6 L=6 | 1 | |
| SM-5040550 TP | SCREW M4 L=5 | 4 | |
| 400 04266 | ASSY PBL GEAR MODULE | (1) | |
| 400 05371 | CLAMP MOTOS ASS'Y | (2) | |
| 400-04273 | PBL FRONT LINK | (1) | |
| 400 04275 | PBL GEAR SHAFT | (1) | |
| 400 04282 | PBL L. LINK | (1) | |
| 400 04270 | PBL LONG ROD | (1) | |
| 400-04278 | PBL SENSOR PLATE | (1) | |
| SM 8060552 TP | SCREW M6 L=5 | (5) | |
| SD-0800520 TP | SCREW M6 L=8 | (4) | |
| 400 04289 | SHOULDER SCREW DS H3.2 | 1 | |
| 400 04267 | ASSY PBL GEAR C | 1 | |
| 22 56005 | ASSY PBL MOTOR BASE | 1 | |
| 400 05379 | PIN, SHORT | (1) | |
| 400-19551 | CLAMP SENSOR ASS'Y | (2) | |
| 139 26358 | SLIDE ROLLER | 1 | |
| 400 04281 | COLLAR | 1 | |
| 400 04295 | PBL COIL SPRING | 1 | |
| 400 04276 | PBL FINGER GUARD | 1 | |
| 400-04280 | PBL GUIDE | 1 | |
| 400 04274 | PBL METAL | 1 | |
| 400-04283 | PBL POSITION BRACKET | 1 | |
| 400-04286 | PBL ROLLER BASE | 1 | |
| 400-04277 | PBL ROLLER SHAFT | 1 | |
| 400-04272 | PBL SENSOR BASE | 1 | |
| 400 04287 | PBL SPRING REGULATOR | 1 | |
| SM-6040502 TP | SCREW M3 X 10 | 1 | |
| SM 6050800 SP | SCREW M4X0.7 L=8 | 4 | |
| SM 6050900 SP | SCREW M5 L=8 | 4 | |
| SM-605202 TP | SCREW M5X0.8 L=10 | 2 | |
| SM 3050602 TP | SCREW M6 L=6 | 1 | |
| 400 20310 | CTT CLOSE CAM B | 1 | |
| SD 0800326 TP | SHOULDER SCREW DS H3.2 | 1 | |
| D1511 772 KAO | WORK CLAMP CHECK HOLDER | 1 | |
| B1511-772-CDO-A | WORK CLAMP CHECK HOLDER ASM. | (2) | |
| B1509-761-000 | WORK CLAMP CHECK SPRING | (2) | |
| B1511 771 008 | WORK CLAMP CHECK SPRING SET P1 | (2) | |
| B1512-761-COO | WORK CLAMP CHECK HOLDER SPRING | (1) | |
| SS-6060210-SP | SCREW 3/32 56 L=1.9 | 2 | |
| D 560-771-KAO A | WORK CLAMP CHECK HOLDER ASM. | (1) | |
| B1511 771 000 B | PRESSER FOOT | (2) | |
| B1512 761 000 | WORK CLAMP CHECK HOLDER SPRING | (1) | |
| B:552 78. 000 A | PRESSER | 1 | |
| SD 0790203 SP | HINGE SCREW D-7.94 H-2 | 1 | |
| D1508 772 300 | (1) | ||
| 400 04195 | (1) | ||
| SB 3070002 00 | BEARING | 1 | |
| SB 4080001 00 | BEARING | 1 |
Page 17 — 6. NEEDLE BAR ROCKING COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-04223 | ZIGZAG DRIVE FULL ASSY | 1 |
| 2 | 400-04378 | ZIGZAG ROD ASM. | (1) |
| 3 | 400-04379 | ZIGZAG ROD | (1) |
| 4 | 235-30405 | SHAFT HOLDER LINK BUSH | (2) |
| 5 | 235-44109 | JUNCTION SHAFT A | (2) |
| 6 | 235-44208 | JUNCTION SHAFT B | (2) |
| 7 | 235-44307 | JUNCTION SHAFT C | (2) |
| 8 | 235-44802 | JUNCTION SHAFT D | (2) |
| 9 | SL-4031081-SC | SCREW M3 X 10 | (1) |
| 10 | SM-6041002-TP | SCREW M4 L=10 | (6) |
| 11 | SM-4051655-SP | SCREW M5 L=16 | (1) |
| 12 | SM-6061802-TP | SCREW M6 L=18 | (1) |
| 13 | SM-8050502-TP | SCREW M5 L=5 | (4) |
| 14 | 400-04376 | SENSOR PLATE | (1) |
| 15 | 400-05377 | NEEDLE SWING SENSOR ASSY | (1) |
| 16 | 400-04380 | ZIGZAG LEVER REAR | (1) |
| 17 | 400-04375 | MOTOR BASE | (1) |
| 18 | 400-04377 | MOTOR LEVER | (1) |
| 19 | 400-05371 | NEEDLE SWING MOTOR ASS'Y | (1) |
| 20 | SM-6061002-TP | SCREW M6 L=10 | 3 |
| 21 | 400-04224 | ZIGZAG LEVER SHAFT ASM. | 1 |
| 22 | NM-6050001-SP | NUT M5 | (1) |
| 23 | 400-04373 | ZIGZAG LEVER SHAFT | (1) |
| 24 | 400-04374 | ZIGZAG_STUD | (1) |
| 25 | 400-04214 | NEEDLE BAR CONNECTION | 1 |
| 26 | SM-6040750-TP | SCREW M4 L=7 | 1 |
| 27 | 400-04209 | NEEDLE BAR ROD | 1 |
| 28 | B1414-232-000 | SQUARE BLOCK | 1 |
| 29 | 400-04222 | NEEDLE BAR FRAME ASSY | 1 |
| 30 | 400-04212 | NEEDLE BAR FRAME | (1) |
| 31 | 400-04213 | NEEDLE BAR METAL | (2) |
| 32 | 400-04221 | SUPPORT SHAFT | 1 |
| 33 | 400-04218 | FRAME SUPPORT PLATE ASM. | 1 |
| 34 | 400-04216 | BUSHING | 1 |
| 35 | 400-04217 | BUSHING REAR | 1 |
| 36 | 400-04215 | NEEDLE BAR | 1 |
| 37 | MDP-5JOB1100 | NEEDLE DPX5 #11J | 1 |
| 38 | 137-06403 | NEEDLE BAR BOBBIN THREAD GUIDE | 1 |
| 39 | SM-6030500-SN | SCREW M3 L=5 | 1 |
| 40 | CS-1501181-TP | THRUST COLLAR D=15 W=11 | 1 |
| 41 | SM-8050502-TP | SCREW M5 L=5 | 2 |
| 42 | SM-8060612-TP | SCREW M6 L=6 | 4 |
Page 19 — 7. NEEDLE THREAD TRIMMER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400 29904 | ASSY_UTT MODULE_B | 1 |
| 2 | RE 0300000 KO | E-RING 3 | (1) |
| 3 | EA 9500B01-00 | CABLE BAND | (1) |
| 4 | NM 6040000-SN | NUT M4 | (2) |
| 5 | NM-6050001-SP | NUT M5 | (4) |
| EA 0300000-KO | CABLE BAND | ||
| WP-0430801-SC | WASHER 4.3X9X0.8 | ||
| SL 4031081 SC | SCREW M3 X 10 | ||
| SD 0600266-TP | SHOULDER SCREW D6 H2.6 | ||
| SM-6040600-SP | SCREW M4 L-6 | ||
| SM-6040602-TP | SCREW M4 L-6 | ||
| SM-6040860 TP | SCREW M4 L-8 | ||
| SM-6040802-TP | SCREW M4X0.7 L-8 | ||
| SM 6041200 SP | SCREW M4 L=12 | ||
| SM 6050652-TP | HEXAGON SOCKET HEAD SCREW M5X6 | ||
| SM-6050800 SP | SCREW M5 L-8 | ||
| SM-6050802 TP | SCREW M5X0.8 L-8 | ||
| 400 04400 | ASSY UTT RELEASE ARM B | ||
| SM-8050412 TP | SCREW M5 L-4 | ||
| SM-8050502 TP | SCREW M5 L-5 | ||
| SD 0600326-TP | SHOULDER SCREW D6 H3.2 | ||
| SD 0800406 TP | SHOULDER SCREW D8 H4 | ||
| SD-0801506-TP | SHOULDER SCREW D8 H15 | ||
| 112-72507 | SPRING | ||
| CS-0800971-TP | THRUST COLLAR D-8 W-9 | ||
| 400 04258 | UTT ARM A | ||
| 400 04293 | UTT BASE PLATE | ||
| 400 04254 | UTT CAM ROLLER | ||
| 400 15702 | UTT CAM ROLLER SHAFT | ||
| 400 04294 | UTT RELEASE ARM A | ||
| 400-04264 | UTT RELEASE LEVER BASE | ||
| 400-04265 | UTT RELEASE LEVER SHAFT | ||
| 400-04292 | UTT SENSOR BASE | ||
| 400-04296 | UTT SUPPORT ARM SPRING | ||
| 400-04234 | UTT SUPPORT SHAFT | ||
| 400 04248 | UTT SUSPENSION SCREW 4 | ||
| 400 04252 | UTT SUSPENSION SCREW 9 | ||
| 400-04247 | UTT SUSPENSION SHOULDER SCREW | ||
| 400-04241 | UTT THREAD PULLING LINK A | ||
| 400 04245 | UTT THREAD PULLING LINK B | ||
| 400 04236 | UTT X-CAM | ||
| 400 04297 | UTT Y-DRIVE ROLLER | ||
| 400 04298 | UTT Y-DRIVE SHAFT | ||
| 400 05374 | CT TRIM MOTOR ASS'Y | ||
| 400-05380 | UT TRIM SENSOR ASS'Y | ||
| 400 28634 | ASSY UTT RELEASE LEVER B | ||
| 400-04229 | ASSY UTT CAM | ||
| 400-04240 | ASSY UTT THREAD PULLING ARM | ||
| 400-04226 | ASSY UTT CAM ARM | ||
| 400-04232 | ASSY UTT SUPPORT ARM | ||
| WP-0431005-SP | PLAIN WASHER 4.3X12X1 | ||
| 400-15674 | UTT RATCH STOPPER | ||
| 400-28636 | UTT GUIDE SHAFT | ||
| 400 04249 | UTT THREAD PULLING PLATE | ||
| 400-04243 | UTT THREAD PULLING LEVER | ||
| 400 04246 | UTT THREAD PULLING SHAFT | ||
| 400 04250 | UTT TRIMMER CLOSE SPRING | ||
| SM-6051202-TP | SCREW M5X0.8 L-12 | ||
| MAZ 16013000 | BUTTON SUPPORT LEVER SPRING | ||
| 400 04255 | ASSY UTT TRIMMER |
Page 21 — 8. BOBBIN THREAD TRIMMER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-04330 | BTT_DRIVE_UNIT | 1 |
| 2 | 400-04332 | ASSY_BTT_DRIVE_CAM | (1) |
| 3 | 400-04336 | ASSY_BTT_DRIVE_LEVER | (1) |
| 4 | 400-04329 | BTT_DRIVE_LINK | (1) |
| 5 | 400-04331 | BTT_DRIVE_UNIT_BASE | (1) |
| 6 | 400-04340 | ASSY_BTT_RELEASE_LEVER | (1) |
| 400-04343 | BTT RELEASE LINK F | ||
| 400-04344 | BTT RELEASE LINK R | ||
| 137-37408 | LINK ROD | ||
| NM-6040001-SP | NUT M4 | ||
| NM-6050001-SP | NUT M5 | ||
| 400-02254 | LT TRIM MOTOR ASS'Y | ||
| SL-4031081-SC | SCREW M3 X 10 | ||
| SM-6040602-TP | SCREW M4 L=6 | ||
| SM-8050412-TP | SCREW M5 L=4 | ||
| SM-9040700-SP | HEXAGONAL BOLT | ||
| 400-04335 | SENSOR FITTING PLATE BT | ||
| 400-05381 | LT TRIM SENSOR ASS'Y | ||
| SD-0801006-TP | SHOULDER SCREW D8 H10 | ||
| 400-04254 | UTT CAM ROLLER | ||
| SD-0800296-TP | SCREW D8 H2.9 | ||
| SM-6040600-SP | SCREW M4 L=6 | ||
| WP-0430801-SC | WASHER 4.3X9X0.8 | ||
| 400-21998 | THROAT PLATE BASE UNIT | ||
| 400-22323 | BT CLAMP B | ||
| 400-04305 | BT CLAMP LEVER | ||
| 400-04309 | BT PULLER B | ||
| 400-22322 | ASSY BT RELEASE ARM | ||
| 400-04308 | BT TRIMMER LINK | ||
| 400-29613 | CLAMP SPRING | ||
| B1623-180-000 | WASHER | ||
| B3013-141-HOA | WASHER | ||
| 400-04311 | BT TRIMMER | ||
| WP-0431005-SP | PLAIN WASHER 4.3X12X1 | ||
| WP-0451016-SP | WASHER 4.5X20X1 | ||
| 400-04306 | BTT_LEVER | ||
| SM-6040450-TP | SCREW M4 L=4 | ||
| SD-0250101-SP | HINGE SCREW | ||
| SD-0500166-TP | SHOULDER SCREW D5 H1.6 | ||
| SD-0500167-TP | SHOULDER SCREW D5 H1.6 | ||
| 400-04327 | SUSPENSION SCREW | ||
| 400-04301 | ASSY THROAT PLATE BASE | ||
| 400-04324 | OIL SHIELD | ||
| SM-1030400-SP | SCREW M3 L=4 | ||
| 400-27553 | THROAT PLATE (1790K5) | ||
| 400-27554 | THROAT PLATE (1790K5) | ||
| WP-0430800-SC | PICKER BASE | ||
| 400-04345 | PICKER BASE FITTING PLATE | ||
| 400-04347 | STOPPER A | ||
| 137-27102 | BOBBIN CASE POSITIONING PLATE | ||
| 137-29306 | SCREW M3 L=4 | ||
| SM-4030455-SN | SCREW M4 L=6 | ||
| SM-6041050-TP | SCREW M4 L=6 | ||
| SM-6041200-SP | SCREW M5X0.8 L=8 | ||
| SM-6050802-TP | SHOULDER SCREW D8 H2.9 | ||
| 400-11327 | PICKER SPRING | ||
| 145-16801 | SAFETY SWITCH PRESSING PLATE | ||
| SM-5030355-SE | SCREW | ||
| NM-6040001-SD | NUT M4 | ||
| 400-04299 | STOPPER PIN | ||
| 400-04164 | OIL TANK ASM. | ||
| 400-04163 | OIL TANK PLATE | ||
| SL-6040892-TN | SCREW | ||
| 400-04328 | PICKER BASE STOPPER | ||
| HX-0033900-0C | PARTS | ||
| 400-04346 | PICKER | ||
| 400-04348 | PICKER ACTUATING LEVER | ||
| 262-30409 | LUBRICATING OIL WICK STOPPER | ||
| 400-04349 | PICKER ACTUATING L LINK |
Page 23 — 9. CLOTH CUTTING KNIFE COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-04381 | KNIFE SOL ASM. | 1 |
| 2 | 400-04384 | CUSION | (1) |
| 3 | 400-04382 | SOLENOID | (1) |
| 4 | 400-09788 | KNIFE HOLDER | (1) |
| 5 | NM-6080003-SC | NUT M8 | (2) |
| 6 | 400-04383 | PLATE A | (1) |
| 7 | SM-6030802-TP | SCREW M3X0.5 L=8 | (2) |
| 8 | SM-6051202-TP | SCREW M5X0.8 L=12 | (1) |
| 9 | SM-6061002-TP | SCREW M6 L=10 | (3) |
| 10 | 400-04387 | SENSOR SLIT PLATE | (1) |
| 11 | 400-04385 | SOLENOID BASE | (1) |
| 12 | HD-0005700-0A | PHOTO SENSOR | (1) |
| 13 | 400-04386 | SENSOR PLATE | (1) |
| 14 | SL-4031091-SC | SCREW M3 X 10 | (1) |
| 15 | 400-05382 | CUTTER SENSOR JOINT CORD | (1) |
| 16 | B2702-047-L00-A | KNIFE 1/2 | 1 |
| 17 | 400-04394 | KNIFE BAR | 1 |
| 18 | 400-04396 | KNIFE BAR BASE | 1 |
| 19 | 400-04397 | KNIFE BAR BRACKET | 1 |
| 20 | 400-04398 | KNIFE BAR BUSH | 1 |
| 21 | 137-46508 | KNIFE BAR CONNECTING LINK | 2 |
| 22 | 400-04390 | KNIFE BAR DRIVING LEVER | 1 |
| 23 | 400-04219 | KNIFE BAR DRIVING STOPPER ASM. | 1 |
| 24 | 400-04391 | KNIFE BAR DRIVING STOP SCREW | (1) |
| 25 | 137-50807 | KNIFE DRIVING LEVER STOPPER | (1) |
| 26 | 400-04210 | KNIFE BAR SUPPORT SHAFT | 1 |
| 27 | 400-40276 | KNIFE_BAR_LOWER_BUSHING | 1 |
| 28 | 400-04393 | KNIFE FITTING BASE | 1 |
| 29 | 400-04395 | KNIFE LEVER SHAFT | 1 |
| 30 | NM-6060002-SD | NUT M6 | 1 |
| 31 | WP-0430801-SC | WASHER 4.3X9X0.8 | 1 |
| 32 | WP-0501016-SD | WASHER 5X10.5X1 | 1 |
| 33 | 400-04392 | BELL CRANK SHAFT | 4 |
| 34 | SM-6040802-TP | SCREW M4X0.7 L=8 | 2 |
| 35 | SM-6061202-TP | SCREW M6 L=12 | 1 |
| 36 | SM-6061200-SP | SCREW | 1 |
| 37 | SM-8060612-TP | SCREW M6 L=6 | 4 |
| 38 | SM-9040700-SP | HEXAGONAL BOLT | 1 |
| 39 | SD-0400506-TP | SHOULDER SCREW D4 H5 | 1 |
| 40 | SM-6051202-TP | SCREW M5X0.8 L=12 | 5 |
| 41 | SM-8050502-TP | SCREW M5 L=5 | 5 |
| 42 | 400-04389 | SPRING | 1 |
| 43 | 400-06315 | SQUARE BLOCK | 1 |
| 44 | 400-04211 | SUPPORT GUIDE | 1 |
| 45 | 137-38802 | SUSPENSION SCREW | 1 |
| 46 | 400-04179 | SUSPENSION SCREW | 1 |
| 47 | CS-1201171-TP | THRUST COLLAR D=12 W=11 | 1 |
| 48 | 400-06313 | COLLAR | 1 |
| 400-04319 | KNIFE BAR DRIVING STOP SCREW | ||
| 400-04270 | KNIFE BAR SUPPORT SHAFT | ||
| 400-04276 | KNIFE BAR_LOWER_BUSHING | ||
| SM-6060802-TP | SCREW M6X0.7 L=8 |
Page 25 — 10. TABLE COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06306 | TABLE | 1 |
| 2 | ST-9053511-SR | TAPPING SCREW M5X35 | 4 |
| 3 | 111-55108 | DRAWER | 1 |
| 4 | 111-55207 | DRAWER SUPPORT | 2 |
| 5 | SK-3311600-SC | WOOD SCREW D=3.1 L=16 | 6 |
| 6 | D8204-555-D00 | DRAWER STOPPER | 1 |
| 7 | B8101-771-0A0 | T-STAND COMPL. | 1 |
| 8 | 111-57559 | T-STAND ASM. | (1) |
| 9 | 111-57666 | UPPER STAND ASM., RIGHT | (1) |
| 10 | 111-57765 | UPPER STAND ASM., LEFT | (1) |
| 11 | 111-57963 | LOWER LEG, RIGHT | (1) |
| 12 | 111-58060 | LOWER LEG, LEFT | (1) |
| 13 | 111-58300 | STAND SIDE SUPPORT | (1) |
| 14 | 111-58409 | STAND SIDE SUPPORT | (1) |
| 15 | 111-58607 | RUBBER CAP | (4) |
| 16 | 170-07402 | NUT | (2) |
| 17 | WP-1302501-SE | WASHER M12 | (4) |
| 18 | WS-1253010-KN | SPRING WASHER 12.5X21.5X3 | (4) |
| 19 | B8108-555-0A0 | ADJUSTING SCREW ASM. WITH CAP | (4) |
| 20 | NM-6120001-SE | NUT M12 | (1) |
| 21 | 111-58516 | UPPER STAND PLATE | (2) |
| 22 | SL-9082091-SE | WASHER HEXAGONAL BOLT | (12) |
| 23 | 138-17754 | Z-STAND PEDAL ASM. | (1) |
| 24 | 138-17754 | Z-STAND PEDAL ASM. | (1) |
| 25 | 111-59001 | PEDAL SHAFT BRACKET | (2) |
| 26 | B8153-771-000 | PEDAL CONNECTING ROD | (1) |
| 27 | D8113-555-B00 | PEDAL BUSHING | (2) |
| 28 | GPF-060600A0 | PEDAL ASM. | (1) |
| 29 | GPF-06080000 | PEDAL ADJUSTING PLATE | (1) |
| 30 | NM-6080721-SE | NUT M8 | (2) |
| 31 | SM-9061203-SE | SCREW M6 L=12 | (2) |
| 32 | SM-9082023-SE | SCREW M8 L-20 | (2) |
| 33 | WP-0671016-SE | WASHER 6.7X13X1 | (2) |
| 34 | WP-0871602-SE | WASHER 8.7X18X1.6 | (4) |
| 35 | WS-0621210-KR | SPRING WASHER 6.2X11.4X1.2 | (2) |
| 36 | WS-0861410-KR | SPRING WASHER 8.6X15X1.4 | (2) |
| 37 | 400-03491 | ASSY 4 POSITION PEDAL | 1 |
| 38 | 137-31906 | SPRING | (1) |
| 39 | B2583-210-D00 | SPRING | (1) |
| 40 | NM-6060001-CP | NUT M6 | (1) |
| 41 | 400-04360 | PEDAL FRAME | (1) |
| 42 | 400-04361 | PEDAL FRAME A | (1) |
| 43 | 400-04362 | PEDAL FRAME B | (1) |
| 44 | 400-04363 | PEDAL FRAME GUIDE | (1) |
| 45 | HD-0006700-0A | PHOTO SENSOR | (2) |
| 46 | SL-4031091-SC | SCREW M3 X 10 | (1) |
| 47 | SL-6031042-TN | SCREW | (1) |
| 48 | SM-5040655-SN | SCREW | (3) |
| 49 | SM-6050652-TP | HEXAGON SOCKET HEAD SCREW M5X6 | (4) |
| 50 | 400-04364 | SENSOR DETECTING PLATE | (3) |
| 51 | SD-1000646-TP | SHOULDER SCREW D10 H6.4 | (1) |
| 52 | 400-04299 | STOPPER PIN | (1) |
| 53 | 400-04327 | SUSPENSION SCREW | (2) |
| 54 | SK-3482001-SE | WOOD SCREW D=4.8 L-20 | 2 |
| R8108-555-0A0 | ADJUSTING SCREW ASM. WITH CAP | (4) | |
| GPF-0600600A0 | PEDAL ASM. | (1) | |
| HD-0005700-0A | PHOTO SENSOR | (2) |
Page 27 — 11. CONTROL BOX COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-03451 | CONTROL BOX | 1 |
| 2 | 400-03452 | CONTROL BOX FRONT COVER | 1 |
| 3 | 400-03453 | CONTROL BOX REAR COVER | 1 |
| 4 | SL-4040891-SC | SCREW M4 L=8 | 6 |
| 5 | SL-4040891-SC | SCREW M4 L-8 | 4 |
| M3B01-476-000 | CONTROL BOX FITTING PLATE | 4 | |
| SM 6083002-7N | SCREW M8 L=30 | 4 | |
| WS 0820002 KR | SPRING WASHER, M8 | 4 | |
| WP 0841601-SC | WASHER 8.4X17.4X1.6 | 4 | |
| M4206-461-000 | WASHER | 4 | |
| 400-03412 | MAIN PCB A ASS'Y | 7 | |
| 400-00029 | SDC PCB A ASS'Y | 1 | |
| SL-4040881-SC | SCREW M4 L=8 | 10 | |
| 400-00056 | FLT-I PCB A ASS'Y | 1 | |
| 400-00026 | FLT-S PCB A ASS'Y | 1 | |
| HX 0033900-00 | STCD | 6 | |
| SM 3040520 SC | NUT M4 | 6 | |
| 400-05401 | FAN MOTOR ASS'Y | 2 | |
| TM 0004800-10- | FINGER GUIDE | 1 | |
| SL-4040591-SC | SCREW M4 L=8 | 4 | |
| 400-05404 | FAN MOTOR BRACKET | 1 | |
| HX 0040750 00 | PE MARK LABEL | 1 | |
| 178-45009 | BUSH | 10 | |
| SL-4041091-SC | CORD FITTING PLATE | 2 | |
| 400-05349 | POWER CORD ASS'Y | 2 | |
| 400-05392 | POWER CORD IP ASS'Y | 1 | |
| 400-05388 | POWER CORD 1220V ASS'Y | 1 | |
| HX-0041000-0A | BUSHING | 1 | |
| 400-05393 | FLT-SDC CORD P ASS'Y | 1 | |
| 400-05394 | FLT-SDC CORD S ASS'Y | 1 | |
| 400-05395 | SDC-MAIN CORD P ASS'Y | 1 | |
| 400-05396 | SDC-MAIN CORD S ASS'Y | 1 | |
| 400-03484 | PEDAL SENSOR ASM. | (1) | |
| M3B01-461-000 | SENSOR FITTING PLATE A ASM. | (1) | |
| M4002-461-000 | PEDAL SENSOR BASE | (1) | |
| M4004-461-000 | PEDAL LEVER | (1) | |
| M4005-461-000 | PEDAL RING | (1) | |
| M4007-351-000 | VOLUME LINK | (1) | |
| SM 4030801 SF | FRONT SPRING | (1) | |
| SM 8040802 TP | SCREW M3X0.5 L=30 | (2) | |
| SV 4030602 SR | SCREW M4X8 | (2) | |
| HX 0015100 0A | SCREW M3 L=6 | 1 | |
| SL 4041681 SF | CABLE PARTS | 3 | |
| HX 0018800-0D | SCREW M4 L=16 | 1 | |
| HX 005100 00 | SCREW M4 L=8 | 4 | |
| E9607-603-000 | WIRE SADDLE | 1 | |
| E9567-319-000 | STCKER (SMALL) | 1 | |
| 400-03458 | EARTH MARK | 1 | |
| M9017-580-0A0 | POWER CABLE ASM. | 1 | |
| 400-05390 | POWER CABLE FE ASS'Y | 1 | |
| M9024-580-0A0 | POWER CABLE ASM. 100V | 1 | |
| M9035-580-0A0 | POWER SOURCE CORD ASM. | 1 | |
| M90T9-580-0A0 | EARTH CABLE ASM. | 1 | |
| SL-4041081-SC | SCREW M4 L=10 | (2) | |
| CM 3001005 03 | VOLTAGE WARNING LABEL (25) | (1) | |
| CM 3004056 07 | VOLTAGE CAUTION LABEL | (1) | |
| CM-3004004-01 | DENGAR LABEL 3 (LARGE) | (1) | |
| BNE 0100000 | VOLTAGE INDICATION SEAL | (1) | |
| BNE-03200000 | VOLTAGE INDICATION SEAL | (1) | |
| 400-05365 | ACCESSORIE PARTS A ASM. | (1) | |
| M3004-511-00A | VOLTAGE INDICATION CARD, A | (1) | |
| HF-0013031-SS | FUSE 3.15A 250V REF. NO.12 | (1) | |
| HF 0030002 00 | FUSE 2A (220/240V) | (1) | |
| HF 003050 PO | FUSE 5A | (1) | |
| 229 58458 | CONNECTING ROD ASM. B | (1) | |
| YAQ 1532000 | CORE STAPLE | (3) | |
| SK 3512001 SE | WOOD SCREW B-5 L=20 | (2) | |
| MTS H100003 | BOLT | (1) | |
| SM 6084002-TS | SCREW M8 L=40 | (1) | |
| WP-0852080 SC | WASHER M8 | (2) | |
| SM-6080002-SC | NUT M8 | (2) | |
| HA-0042500-00 | SWITCH | 1 | |
| SL-4041681-SC | NUT M8X1.25 | 8 | |
| SM 6080000- SC | RATING LABEL A | 1 | |
| 400-03480 | RATING LABEL B | 1 | |
| 400-03481 | REACIOR CORD ASSY | 1 | |
| 400 12038 | STCKER (SMALL) | 1 | |
| CM-3004007-01 | CORES | 1 | |
| HN-0024600-00 | CORES | 1 |
Page 29 — 12. OPERATION BOX COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-03465 | OPERATION PANEL A ASS'Y | 1 |
| 2 | 400-03434 | PANEL1 PCB A ASS'Y | (1) |
| 3 | 400-03441 | PANEL2 PCB ASS'Y | (1) |
| 4 | 400-03460 | PANEL SHEET | (1) |
| 5 | 400-03462 | LCD SHEET | (1) |
| 6 | HG-0074700-00 | LCD MODULE | (1) |
| 7 | 400-03464 | OPERATION BOX UPPER CASE | (1) |
| 8 | M1031-580-0A0 | OPERATION BOX LOWER CASE ASM. | (1) |
| 9 | M1031-580-000 | OPERATION BOX LOWER CASE | (1) |
| 10 | M1011-580-000 | MAGNET SHEET | (2) |
| 11 | M1032-580-000 | VOLUME TONGUE | (1) |
| 12 | ST-4031051-SN | TAPPING SCREW D=3-24 L=10 | (6) |
| 13 | M1017-580-0A0 | OPERATION BOX FIXED PLATE ASM. | 1 |
| 14 | SK-3413201-SE | WOOD SCREW D=4.1 L=32 | 2 |
| BG-0074700-00 | LCD MODULE |
Page 31 — 13. OPERATION PANEL COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-09938 | IP-200A_ASSY | 1 |
| 2 | 400-00131 | NAME_PLATE | (1) |
| 3 | 400-00132 | OPERATION_PANEL_F | (1) |
| 4 | 400-00133 | INSERT_NUT | (6) |
| 5 | A3906-010-000 | TOUCH PANEL | (1) |
| 6 | 400-00134 | TTP_H_FELT | (2) |
| 7 | 400-00135 | TTP_V_FELT | (2) |
| 8 | 400-00136 | KEY_SHEET | (1) |
| 9 | 400-00137 | LCD_BASE_PLATE | (1) |
| 10 | 400-00138 | BOTHSIDES_TAPE | (3) |
| 11 | A3950-010-0A0 | LCD | (1) |
| 12 | SL-4030691-SC | SCREW M3X6 | (4) |
| 13 | 400-00139 | STUD | (6) |
| 14 | 400-00140 | ISOLATION_SHEET | (1) |
| 15 | TA-0550604-RO | RUBBER PLUG | (1) |
| 16 | 400-00141 | OPERATION_PANEL_R | (1) |
| 17 | 400-00142 | SM_COVER | (1) |
| 18 | 400-00143 | SERIAL_COVER | (1) |
| 19 | 400-00144 | OPERATION_PANEL_MAGNET | (1) |
| 20 | SL-4030881-SC | SCREW M3X8 | (4) |
| 21 | 400-00146 | LCD_CABLE_ASS'Y | (1) |
| 22 | 400-00148 | PANEL_PCB_A_ASS'Y | (1) |
Page 33
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-03454 | CONTROL BOX A ASM. | 1 |
| 2 | 400-03456 | CONTROL BOX C ASM. | 1 |
| 3 | 400-03455 | CONTROL BOX B ASM. | 1 |
| 4 | 400-00056 | FLT-T PCB A ASS'Y | (1) |
| 5 | 400 00046 | FLT-S PCB A ASS'Y | (1) |
| 6 | 400 00029 | SDC PCB A ASS'Y | (1) |
| 7 | 400-03412 | MAIN PCB A ASS'Y | (1) |
| 8 | 400-05393 | FLT-SDC CORD P ASS'Y | (1) |
| 9 | 400-05394 | FLT SDC CORD S ASS'Y | (1) |
| 10 | 400-05395 | SDC-MAIN CORD P ASS'Y | (1) |
| 11 | 400-05396 | SDC MAIN CORD S ASS'Y | (1) |
| 12 | 400-03491 | ASSY 4 POSITION PEDAL | (1) |
| 13 | 400-03484 | PEDAL SENSOR ASM. | (1) |
| 14 | 400 05401 | FAN MOTOR ASS'Y | (1) |
| 15 | 400 05401 | FAN MOTOR ASS'Y | (1) |
| 16 | 400-05405 | WINDER CORD ASS'Y | (1) |
| 17 | 400-12038 | REACTOR CORD ASSY | (1) |
| 18 | M9017-580 0A0 | POWER CABLE ASM. | 1 |
| 19 | M9024 580-0A0 | POWER CABLE ASM.,100V | 1 |
| 20 | 400 05390 | POWER CABLE JE ASS'Y | 1 |
| 21 | M9034-580-0A0 | GROUND CORD ASM. | 1 |
| 22 | 400-05391 | POWER CORD 3P ASS'Y | 1 |
| 23 | 400 05388 | POWER CORD 1P220V ASS'Y | 1 |
| 24 | 400-05392 | POWER CORD 1P ASS'Y | 1 |
| 25 | 400 28015 | AC SERVO MOTOR | 1 |
| 26 | 400-05397 | MAIN INT CORD A ASS'Y | 1 |
| 27 | 400-05398 | MAIN INT CORD B ASS'Y | 1 |
| 28 | 400-05399 | MAIN INT CORD D ASS'Y | 1 |
| 29 | 400 03465 | OPERATION PANEL A ASS'Y | 1 |
| 30 | G5001-198 0A0 A | BOBBIN WINDER ASM. | 1 |
| 31 | 400-03422 | INT PCB ASS'Y | 1 |
| 32 | 400-05371 | NEEDLE SWING MOTOR ASS'Y | 1 |
| 33 | 400-05372 | FEED MOTOR ASS'Y | 1 |
| 34 | 400-05373 | CLAMP MOTOR ASS'Y | 1 |
| 35 | 400-05374 | UT TRIM MOTOR ASS'Y | 1 |
| 36 | 400-05375 | LT TRIM MOTOR ASS'Y | 1 |
| 37 | 400 04382 | SOLENOID | 1 |
| 38 | 400-06261 | ASSY AT SOLENOID | 1 |
| 39 | 400-05402 | HEAD FAN MOTOR A ASS'Y | 1 |
| 40 | 400-05377 | NEEDLE SWING SENSOR ASSY | 1 |
| 41 | 400 05378 | FEED SENSOR ASS'Y | 1 |
| 42 | 400 05379 | CLAMP SENSOR ASS'Y | 1 |
| 43 | 400-05380 | UT TRIM SENSOR ASS'Y | 1 |
| 44 | 400-05381 | LT TRIM SENSOR ASS'Y | 1 |
| 45 | HD-0005700-0A | PHOTO SENSOR | 1 |
| 46 | 400-03499 | THREAD BREAK DETECTOR A | 1 |
| 47 | 400 05382 | CUTTER SENSOR JOINT CORD | 1 |
| 48 | 320-02354 | SWITCH ASM. | 1 |
| 49 | 400-03495 | SAFETY SWITCH ASS'Y | 1 |
| 50 | 400-05400 | PAUSE SWITCH JOINT CORD | 1 |
| 51 | 400-03497 | SAFETY SWITCH JOINT CORD | 1 |
| 52 | 400-05403 | HEAD FAN MOTOR B ASS'Y | 1 |
| 53 | M9035-580-0A0 | POWER SOURCE CORD ASM. | 1 |
| 54 | 400 09938 | IP-200A ASSY | 1 |
| 400-03411 | INT PCB ASS'Y | ||
| 400-05404 | HEAD FAN MOTOR B ASS'Y |
Page 35 — 15. ACCESSORIE PART COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-32800 | ACCESSORIE BAG | 1 |
| 2 | 229-33204 | SCREW DRIVER,SMALL | 1 |
| 3 | 229-33105 | SCREW DRIVER,MIDDLE | 1 |
| 4 | 400-09148 | BOBBIN | 1 |
| 5 | MDP-5J0B1102 | NEEDLE DPX5 #11J-2 | 1 |
| 6 | J1066-000-00D | HEXAGONAL WRENCH KEY | 1 |
| 7 | 137-82107 | HOOK TIMING GAUGE, K | 1 |
| 8 | 400-04311 | BT_TRIMMER | 1 |
| 9 | 400-04255 | ASSY UTT TRIMMER | 1 |
| 10 | 225-02504 | THREAD GUIDE BAR | 1 |
| 11 | D6056-555-B00 | RUBBER CUSHION (B) | 4 |
| 12 | 261-04851 | CONNECTING ROD COMPL. | 1 |
| 13 | 400-08890 | AUXILIARY TABLE ASM. | 1 |
| 14 | 400-08889 | AUXILIARY TABLE | (1) |
| 15 | 137-85803 | INSTALLING PLATE | (2) |
| 16 | SS-7110570-SP | SCREW 11/64-40 L= 4.8 | (4) |
| 17 | SM-6061002-TP | SCREW M6 L=10 | 2 |
| 18 | B2702-047-Q00-A | KNIFE 1 | 1 |
| 19 | J1067-000-000 | OILER | 1 |
| 20 | MDF-RX1600CO | DEFRIX OIL NO.1(600CC) | 1 |
| 21 | B2702-047-M00-A | KNIFE 5/8 | 1 |
| 22 | B2702-047-L00-A | KNIFE 1/2 | 1 |
| 23 | B9107-761-000 | THREAD PASSING INSTRUMENT | 1 |
| 24 | 400-52047 | ASSY SAFETY PLATE B | 1 |
| 25 | 400-49424 | SAFETY PLATE BESE | (1) |
| 26 | B3120-372-000 | SAFETY PLATE | (1) |
| 27 | SL-4040891-SC | SCREW M4 L=8 | (2) |
| 28 | SM-6040602-TP | SCREW M4 L=6 | (1) |
| 29 | WP-0612056-SD | WASHER 6.1X18.5X2 | 4 |
| 30 | NM-6060001-SD | NUT M6 | 8 |
| 31 | 262-34005 | VINYL COVER | 1 |
| 32 | 139-43402 | TIMING GAUGE, DMESTIC USE. | 1 |
| 33 | B2702-047-K00-A | KNIFE 3/8 | 1 |
| 34 | SL-6040892-TN | BOLT | 1 |
| 35 | B1552-782-0A0 | PRESSER FOOT 2 ASM. | 1 |
| 36 | 400-06323 | JUKI GREASE A TUBE | 1 |
| 37 | CM-6001002-01 | WEEE INFORMATION SHEET | 1 |
| 38 | GCT-02906000 | HEXAGONAL SPANNER | 1 |
| 39 | 229-33006 | SCREW DRIVER,LARGE | 1 |
| 40 | 291-80403 | EC PRODUCTION DECLARATION | 1 |
| 41 | 141-01208 | HEAD SUPPORT BAR | 1 |
| 42 | SM-6067052-TP | HEXAGON BOLT | 4 |
Page 36 — 16. THREAD STAND COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-30358 | THREAD STAND ASM. | 1 |
| 2 | 229-31109 | SPOOL RETAINER | (2) |
| 3 | 229-31000 | SPOOL PIN | (2) |
| 4 | 229-30903 | SPOOL REST CUSHION | (2) |
| 5 | 229-30804 | SPOOL REST | (2) |
| 6 | SM-6061610-SC | SCREW M6 L-16 | (2) |
| 7 | 229-30705 | THREAD GUIDE ARM JOINT | (2) |
| 8 | 229-31406 | SPOOL REST ROD RUBBER CAP | (1) |
| 9 | 229-30507 | SPOOL REST ARM | (2) |
| 10 | 229-30408 | SPOOL REST ROD, UPPER | (1) |
| 11 | 229-31307 | SPOOL REST ROD JOINT | (1) |
| 12 | SM-4051405-SE | SCREW M5 L-14 | (2) |
| 13 | NM-6050001-SE | NUT M5 | (2) |
| 14 | 229-30309 | SPOOL REST ROD, LOWER | (1) |
| 15 | 229-31208 | THREAD GUIDE | (2) |
| 16 | WS-0510002-KN | SPRING WASHER | (2) |
| 17 | NM-6050001-SE | NUT M5 | (2) |
| 18 | NM-6160511-SE | NUT M16X1.5 | (1) |
| 19 | WP-1702600-SO | WASHER 17X30X2.6 | (2) |
Page 37 — 17. SPECIAL SPECIFICATIONS COMPONENTS (1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | G5001-198-0A0-A | BOBBIN WINDER ASM. | 1 |
| 2 | 400-05405 | WINDER CORD ASS'Y | 1 |
| 3 | B3221-771-0A0 | BOBBIN WINDER TENSION BRACKET | 1 |
| 4 | B3221-771-000 | BOBBIN WINDER TENSION BRACKET | (1) |
| 5 | B3219-232-000 | BOBBIN WINDER TENSION POST | (1) |
| 6 | B3214-047-000 | BOBBIN WINDER TENSION DISC | (2) |
| 7 | B3218-232-000 | BOBBIN WINDER TENSION SPRING | (1) |
| 8 | B3216-047-000 | BOBBIN WINDER TENSION NUT | (1) |
| 9 | NS-6110310-SP | NUT 11/64-40 | (1) |
| 10 | SK-3452000-SC | WOOD SCREW D=4.5 L=20 | 4 |
| 11 | 400-03493 | PK PEDAL JOINT CORD ASS'Y | 1 |
| 12 | GPK-510010B0 | PEDAL SWITCH ASM. | 1 |
| 13 | 400-28669 | HOOK_COOLING_UNIT_B | 1 |
| 14 | 400-23432 | FILTER REGULATOR ASM. | (1) |
| 15 | PF-0551060-A0 | FILTER REGULATOR | (1) |
| 16 | PF-9020050-00 | REGULATOR BRACKET | (1) |
| 17 | PJ-0251000-03 | PLUG | (1) |
| 18 | PV-0151220-00 | FINGER VALVE | (1) |
| 19 | 400-28670 | PIPE_BRACKET_ASM._B | (1) |
| 20 | SK-3412001-SE | WOOD SCREW D=4.1 L=20 | (2) |
| 21 | SL-6041092-TN | SCREW | (1) |
| 22 | MA-0115320-00 | STAPLE | (2) |
| 23 | EA-9500B01-00 | CABLE BAND | (2) |
Page 39 — 18. SPECIAL SPECIFICATIONS COMPONENTS (2)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06345 | RP_HOOK ASM. | 1 |
| 2 | 400-06349 | RP BOBBIN CASE | 1 |
| 3 | 137-29603 | HOOK SLEEVE | 1 |
| 4 | SS-8660612-TP | SCREW 1/4-40 L=6 | 4 |
| 5 | 400-06340 | WORK CLAMP HOLDER SPACE | 1 |
| 6 | SM-6040450-TP | SCREW M4 L=4 | 3 |
| 7 | 400-28682 | UTT CLOSE CAM 120B | 1 |
| 8 | 400-06342 | LIFTING PLATE 120 | 1 |
| 9 | SM-6050800-SP | SCREW M5 L=8 | 2 |
| 10 | 400-06335 | WORK CLAMP ARM 120 | 1 |
| 11 | 400-06339 | WORK_CLAMP CARRIER 120 | 1 |
| 12 | 145-23252 | PRESSER FOOT 70 ASM. | 1 |
| 13 | B1509-761-000 | PRESSER FITTING PLATE SPRING | (2) |
| 14 | B1512-761-000 | PRESSER FOOT HOLDER SPRING | (1) |
| 15 | 145-23203 | PRESSER FOOT 70 | (1) |
| 16 | B1510-771-00B | PRESSER FOOT PIN B | (2) |
| 17 | 145-23708 | URETHANE PRESSER 70 | 1 |
| 18 | 145-24102 | PRESSER 70 (FLAT) | 1 |
| 19 | 145-23401 | PRESSER 70 | 1 |
| 20 | SS-6060210-SP | SCREW 3/32-56 L= 1.9 | 6 |
| 21 | SD-0790203-SP | HINGE SCREW D=7.94 H=2 | 3 |
| 22 | 145-24409 | PRESSER 6MM | 1 |
| 23 | 400-04351 | THROAT PLATE(S6) | 1 |
| 24 | 400-04353 | THROAT PLATE(K6) | 1 |
| 25 | 400-08646 | ASSY WORK CLAMP CHECK HOLDER 1 | 1 |
| 26 | 400-08638 | WORK_CLAMP CHECK_HOLDER_SPRING | (1) |
| 27 | B1510-771-00B | WORK CLAMP CHECK SPRING SET PI | (2) |
| 28 | B1509-761-000 | WORK CLAMP CHECK SPRING | (2) |
| 29 | 400-08647 | WORK CLAMP_CHECK_HOLDER 120 | (1) |
| 30 | 400-08658 | WORK_CLAMP 120 | 1 |
| 31 | 400-15733 | THROAT PLATE(S10) | 1 |
| 32 | 400-15802 | OIL SHIELD 10 | 1 |
| 33 | 400-20010 | WORK CLAMP HOLDER(3-10) ASSY | 1 |
| 34 | 400-20011 | WORK_CLAMP HOLDER(3-10) | (1) |
| 35 | 400-08638 | WORK CLAMP CHECK HOLDER SPRING | (1) |
| 36 | B1510-771-00B | WORK CLAMP CHECK SPRING SET PI | (2) |
| 37 | B1509-761-000 | WORK CLAMP CHECK SPRING | (2) |
| 38 | 400-17810 | WORK CLAMP(3S-10) | 1 |
| 39 | 400-20014 | WORK CLAMP_CARRIER(10X41) CL | 1 |
| 40 | 400-20012 | WORK_CLAMP CARRIER(10X41) | (1) |
| 41 | CM-3002000-01 | ATTENTION SEAL | (1) |
| 42 | 400-20013 | WORK CLAMP ARM(10X41) | 1 |
| SS-5060210-SP | SCREW 3/32-56 L=1.9 | ||
| 400-20000-01 | ATTENTION SEAL |
Page 40 — 19. EXCHANGING PARTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | B2702-047-F00 | KNIFE 1/4" | 1 |
| 2 | B2702-047-K00-A | KNIFE 3/8 | 1 |
| 3 | B2702-047-100 | KNIFE (7/16) | 1 |
| 4 | B2702-047-L00-A | KNIFE 1/2 | 1 |
| 5 | B2702-047-V00 | KNIFE 9/16" | 1 |
| 6 | B2702-047-M00-A | KNIFE 5/8 | 1 |
| 7 | B2702-047-A00 | KNIFE 11/16 | 1 |
| 8 | B2702-047-N00 | KNIFE 3/4" | 1 |
| 9 | B2702-047-P00 | KNIFE 7/8" | 1 |
| 10 | B2702-047-Q00-A | KNIFE 1 | 1 |
| 11 | B2702-047-S00-A | KNIFE 1-1/4" | 1 |
| 12 | B1552-781-000-A | PRESSER | 1 |
| 13 | B1552-782-000 | WORK CLAMP CHECK, 2 | 1 |
| 14 | B1552-783-000 | WORK CLAMP CHECK, 3 | 1 |
| 15 | D1508-771-K00-A | LATCH WORK CLAMP CHECK | 1 |
| 16 | D1508-772-K00 | WORK CLAMP CHECK (2K) | 1 |
| 17 | D1508-773-K00 | WORK CLAMP CHECK (3K) | 1 |
| 18 | 145-24409 | WORK CLAMP CHECK | 1 |
| 19 | D1511-771-KA0-A | WORK CLAMP CHECK HOLDER ASM. | 1 |
| 20 | D1511-772-KA0 | WORK CLAMP CHECK HOLDER | 1 |
| 21 | D1511-773-KA0 | WORK CLAMP CHECK HOLDER | 1 |
| 146-24409 | WORK CLAMP CHECK | 1 |
Page 41 — 20. LIST FOR INFORMATION OF CHANGE
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 26 | CM-3002001-B1 | CM-3002001-B1 | |
| 4 | B1811-771-000 | B1811-771-000 | |
| 24 | 400-04365 | ||
| 25 | 400-04366 | ||
| 27 | 139-43105 | ||
| 28 | 139-43204 | ||
| 29 | PS-0200062-KH | PS-0200062-KH | |
| 30 | SS-4110715-SP | SS-4110715-SP | |
| 32 | NS-6110310-SP | NS-6110310-SP | |
| 33 | WP-0450801-SD | WP-0450801-SD | |
| 34 | SD-0601021-SP | SD-0601021-SP | |
| 35 | 262-26407 | ||
| 36 | NS-6120310-SP | NS-6120310-SP | |
| 37 | WP-0740516-SP | WP-0740516-SP | |
| 26 | CM-3013000-01 | CM-3013000-01 | |
| 4 | 400-09148 | ||
| 24 | 400-52047 | ||
| 25 | 400-49424 | ||
| 27 | SL-4040891-SC | SL-4040891-SC |
Page 45 — NUMERICAL INDEX OF PARTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 30 | 400-08658 | ||
| 14 | 400-08889 | ||
| 13 | 400-08890 | ||
| 57 | 400-08977 | ||
| 58 | 400-08978 | ||
| 72 | 400-09037 | ||
| 4 | 400-09148 | ||
| 4 | 400-09788 | ||
| 1 | 400-09938 | ||
| 29 | 400-10434 | ||
| 15 | 400-10434 | ||
| 31 | 400-10435 | ||
| 16 | 400-10435 | ||
| 27 | 400-11143 | ||
| 36 | 400-11144 | ||
| 37 | 400-11145 | ||
| 37 | 400-11146 | ||
| 63 | 400-11327 | ||
| 31 | 400-11355 | ||
| 55 | 400-11517 | ||
| 87 | 400-12038 | ||
| 17 | 400-12038 | ||
| 54 | 400-15674 | ||
| 31 | 400-15702 | ||
| 31 | 400-15733 | ||
| 32 | 400-15802 | ||
| 38 | 400-17810 | ||
| 45 | 400-19551 | ||
| 33 | 400-20010 | ||
| 34 | 400-20011 | ||
| 40 | 400-20012 | ||
| 42 | 400-20013 | ||
| 39 | 400-20014 | ||
| 67 | 400-20310 | ||
| 38 | 400-21933 | ||
| 27 | 400-21998 | ||
| 11 | 400-22121 | ||
| 28 | 400-22323 | ||
| 14 | 400-23432 | ||
| 49 | 400-27553 | ||
| 49 | 400-27554 | ||
| 22 | 400-28015 | ||
| 25 | 400-28015 | ||
| 48 | 400-28634 | ||
| 61 | 400-28636 | ||
| 13 | 400-28669 | ||
| 19 | 400-28670 | ||
| 7 | 400-28682 | ||
| 33 | 400-29613 | ||
| 1 | 400-29904 | ||
| 27 | 400-40276 | ||
| 25 | 400-49424 | ||
| 24 | 400-52047 |
Juki LBH-1790 (48 pages) — parts catalog
- Page 1 (cover): This is the cover page for the JUKI LBH-1790 Series High-speed, Electronic Buttonholing Machine Parts List.
- Page 2 (cover): This is the cover page of the parts catalog, featuring a large watermark and a footer indicating the source of the document.
- Page 3 (text): This page provides instructions on how to use the parts list, explaining codes and notations used in the catalog, including explanations for asterisks, '01' notations, quantities, and dotted lines.
- Page 5 (toc): This page contains the table of contents for the parts catalog, listing sections such as Special Specifications Components, Exchanging Parts, List for Information of Change, and Numerical Index of Parts, along with their corresponding page numbers.
- Page 6 (diagram): This page displays a diagram of frame and miscellaneous cover components for an industrial sewing machine, with numbered parts and their corresponding references.
- Page 7 (parts_list): This page lists parts for a sewing machine, including screws, covers, and various assemblies, with part numbers, descriptions, and quantities.
- Page 8 (diagram): This page displays a diagram of frame and miscellaneous cover components for an industrial sewing machine, with numbered parts and their corresponding references.
- Page 9 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, quantities, and some Japanese text.
- Page 10 (diagram): This page displays a diagram of main shaft components, including various pulleys, shafts, screws, and brackets, with reference numbers for each part.
- Page 11 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, and quantities. It covers items from reference number 1 to 57.
- Page 12 (diagram): This page displays a diagram of hook driving shaft components, with numbered parts and their corresponding references.
- Page 13 (parts_list): This page lists parts for sewing machines, including bearings, shafts, sprockets, and oil filters, with their corresponding part numbers and descriptions.
- Page 14 (diagram): This page displays a diagram of presser and feed components, labeled with reference numbers and part numbers for identification.
- Page 15 (parts_list): This page contains a parts list for various components of an industrial sewing machine, including screws, shafts, plates, and assemblies, with part numbers, descriptions, and quantities.
- Page 16 (diagram): This page displays a diagram of needle bar rocking components, with numbered parts and their corresponding details.
- Page 17 (parts_list): This page lists parts for a sewing machine, including various screws, shafts, and assemblies, with their corresponding part numbers and descriptions.
- Page 18 (diagram): This page displays a diagram of needle thread trimmer components, with numbered parts and their corresponding references.
- Page 19 (parts_list): This page lists parts for a sewing machine, including various screws, nuts, washers, and specialized components like UTT modules and arms, with their corresponding part numbers and descriptions.
- Page 20 (diagram): This page displays a diagram of bobbin thread trimmer components, with numbered parts and their corresponding details.
- Page 21 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, and quantities, with some parts specified for models LBH-1790S and LBH-1792K.
- Page 22 (diagram): This page displays a diagram of cloth cutting knife components, with numbered parts and their corresponding references.
- Page 23 (parts_list): This page lists parts for a sewing machine, including knives, screws, plates, sensors, and various hardware, with their corresponding part numbers, descriptions, and quantities.
- Page 24 (diagram): This page displays a diagram of table components, including various parts like the table top, legs, drawers, and associated hardware, with reference numbers for each component.
- Page 25 (parts_list): This page lists parts for a sewing machine, including screws, washers, stands, pedals, and sensors, with their corresponding part numbers and descriptions.
- Page 26 (diagram): This page displays a diagram of control box components, including various screws, fans, wires, and mounting hardware, with corresponding reference numbers for identification.
- Page 27 (parts_list): This page lists various parts for the sewing machine, including screws, washers, plates, cables, and labels, along with their part numbers and descriptions.
- Page 28 (diagram): This page displays a diagram of operation box components, with numbered parts and their corresponding references.
- Page 29 (parts_list): This page lists parts for the standard panel model, including operation panels, PCBs, panel sheets, LCD modules, operation boxes, screws, and magnets, with their corresponding part numbers and quantities.
- Page 30 (diagram): This page displays a diagram of operation panel components, with numbered parts and their corresponding references.
- Page 31 (parts_list): This page lists parts for the IP PANEL MODEL, including part numbers, descriptions, and quantities. It details components like the IP-200A ASSY, NAME PLATE, OPERATION PANEL_F, and various screws and plates.
- Page 33 (parts_list): This page lists parts for industrial sewing machines, including part numbers, descriptions, and quantities, with notes and references.
- Page 34 (diagram): This page displays a diagram of accessory part components, with numbered illustrations of various parts and their corresponding reference numbers.
- Page 35 (parts_list): This page contains a parts list for various sewing machine components, including accessories, tools, hardware, and specialized parts like timing gauges and presser feet. It lists part numbers, descriptions, and quantities, with some parts noted for specific models or applications.
- Page 36 (parts_list): This page lists the components of the thread stand, including part numbers, descriptions, and quantities.
- Page 37 (diagram): This page contains a diagram of electric bobbin winder components and 2-pedal for standing machine components, along with a parts list detailing part numbers, descriptions, and quantities.
- Page 38 (diagram): This page displays a diagram of special specification components for large size types (70mm, 120mm) and swing width 10mm and 6mm types, with numbered parts.
- Page 39 (parts_list): This page contains a parts list for various components of an industrial sewing machine, including screws, plates, holders, and arms, with their corresponding part numbers and descriptions.
- Page 40 (parts_list): This page lists various parts for sewing machines, including knives, presser feet, and work clamp checks, with their corresponding part numbers, descriptions, and quantities.
- Page 41 (parts_list): This page lists added and obsolete parts with their corresponding revision numbers, page references, and part numbers. It includes a table detailing parts with columns for Rev. No., Page Ref. No., and Parts No., as well as a section for errata.
- Page 45 (parts_list): This page contains a numerical index of parts for Superior Sewing Machine & Supply LLC, listing part numbers, page references, and reference numbers.
- Page 46 (text): This page contains a memo section with lines for writing notes. It also includes page numbering and library information at the bottom.
- Page 47 (cover): This is the cover page of the parts catalog, featuring a large watermark and a footer indicating the source of the document.
- Page 48 (cover): This is the cover page of a JUKI Corporation parts catalog, copyrighted 2002-2006. It includes contact information for further inquiries and states that the parts list is subject to change for product improvement.