Juki DDL-8700 (36 pages) Parts Book (PDF)
Text index — Juki DDL-8700 (36 pages)
Page 5 — 1. MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-02159 | FACE PLATE ASM. | 1 |
| 2 | 229-02209 | FACE PLATE AGSKET | 1 |
| 3 | SS-6080410-SP | SCREW 1/8-44 L=4 | 1 |
| 4 | 229-00757 | ARM OIL SHIFLD ASM. | 1 |
| 5 | TA-0850604-RO | RUBBER PLUG | 2 |
| 6 | TA-1250705-RO | RUBBER PLUG | 1 |
| 7 | 229-58300 | THREAD GUIDE ROD | 1 |
| 8 | SS-4120915-SP | SCREW 3/16-28 L=9 | 8 |
| 9 | 229-54705 | CORD HOLDER | 1 |
| 10 | 229-00401 | SIDE PLATE | 1 |
| 11 | 110-00619 | GASKET | 1 |
| 12 | CM-3002000-01 | ATTENTION SEAL | 1 |
| 13 | CM-3002001-A1 | SAFETY LABEL.,3 (SMALL). | 1 |
| 14 | 229-01805 | GROUND MARK | 1 |
| 15 | SS-4120615-SP | SCREW 3/16-28 L=6 | 1 |
| 16 | TA-2000502-RO | RUBBER PLUG | 1 |
| 17 | SS-6121840-SP | SCREW 3/16-28 L=18 | 1 |
| 18 | 229-52501 | REVERSE FEED LEVER STOPPER | 1 |
| 19 | TA-2101002-RO | RUBBER PLUG | 1 |
| 20 | 111-00104 | MAGNET CORD RUBBER | 1 |
| 21 | 229-45463 | THREAD TENSION ASM. | 1 |
| 22 | 229-45414 | THREAD TENSION POST | (1) |
| 23 | 229-45604 | THREAD TENSION GUIDE | (1) |
| 24 | 229-45802 | BOBBIN WINDER TENSION DISC | (2) |
| 25 | 229-45505 | THREAD TENSION SPRING | (1) |
| 26 | 229-45703 | THREAD TENSION NUT | (1) |
| 27 | SS-4120615-SP | SCREW 3/16-28 L=6 | 1 |
| 28 | 229-00609 | THREAD TAKE-UP LEVER COVER | 1 |
| 29 | SS-4120615-SP | SCREW 3/16-28 L=6 | 1 |
| 30 | 229-20508 | ARM THREAD GUIDE A | 1 |
| 31 | 229-21001 | SCREW | 1 |
| 32 | 229-45356 | THREAD TENSION ASM. | 1 |
| 33 | 229-21308 | TENSION NUT | (1) |
| 34 | 229-21407 | ROTATING STOPPER | (1) |
| 35 | 229-21704 | TENSION SPRING A | (1) |
| 36 | 229-21803 | THREAD TENSION DISK PRESSER | (1) |
| 37 | 229-21506 | THREAD TENSION DISK | (2) |
| 38 | 229-21209 | TENSION POST | (1) |
| 39 | 229-21605 | TAKE-UP SPRING | (1) |
| 40 | 229-45307 | TENSION POST SOCKET | (1) |
| 41 | SS-8090670-SP | SCREW 9/64-40 L= 5.5 | (1) |
| 42 | SS-8150710-TP | SCREW 15/64-28 L=7 | 1 |
| 43 | B3118-552-E00 | TENSION RELEASING | 1 |
| 44 | B1109-012-10B | THROAT PLATE (I) | 1 |
| 45 | SS-2110920-TP | SCREW 11/64-40 L=8.5 | 1 |
| 46 | SS-2110915-SP | SCREW 11/64-40 L=8.5 | 1 |
| 47 | 229-20607 | ARM THREAD GUIDE B | 1 |
| 48 | SS-6110610-TP | SCREW 11/64-40 L=6 | 1 |
| 49 | TA-1250406-RO | RUBBER PLUG D=12.5 L=4 | 2 |
| 50 | SS-4120915-SP | SCREW 3/16-28 L=9 | 3 |
| 51 | 229-01250 | SLIDE PLATE ASM. | 1 |
| 52 | 229-01201 | SLIDE PLATE | (1) |
| 53 | 229-01300 | BED SLIDE SPRING | (1) |
| 54 | SS-6060210-SP | SCREW 3/32-56 L= 1.9 | (2) |
| 55 | 229-01003 | BED SCREW STUD | 4 |
| 56 | WT-0530002-KS | TOOTHED WASHER D=5.3 | 1 |
| 57 | 229-35407 | RUBBER PLATE | 1 |
| 58 | 114-15205 | THREAD TAKE-UP LEVER COVER(JE) | 1 |
| 59 | 110-30202 | RUBBER BUSHING | 1 |
| 60 | B1109-552-000 | THROAT PLATE | 1 |
| 61 | 229-02605 | RULER STOPPER | 1 |
| 62 | SS-7110540-SP | SCREW 11/64-40 L=5 | 2 |
| 63 | CM-3002001-01 | SAFETY LABEL, 1(SMALL). | 1 |
| 64 | SS-4121215-SP | SCREW 3/16-28 L=12 | 1 |
| 65 | 110-28008 | THROAT PLATE | 1 |
| 66 | WP-0501016-SD | WASHER 5X10.5X1 | 1 |
| 67 | 229-90352 | RESISTANCE PACK ASM. A | 1 |
| 68 | 229-90659 | RESISTANCE PACK ASM. E | 1 |
| 69 | 229-90550 | RESISTANCE PACK ASM. H | 1 |
| 70 | CM-3002000-B1 | LABEL(16) | 1 |
| R109-552-000 | THROAT PLATE | 1 |
Page 7 — 2. MAIN SHAFT & THREAD-UP LEVER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | SS-8151150-TP | SCREW 15/64-28 L=10.5 | 1 |
| 2 | 229-19559 | THREAD TAKE-UP CRANK SHAFT ASM | 1 |
| 3 | 110-02904 | ROLLER FELT | 1 |
| 4 | 110-39070 | THREAD TAKE-UP LEVER ASM. | 1 |
| 5 | 110-39062 | THREAD TAKE-UP LEVER ASM. | (1) |
| 6 | B1905-541-B00 | NEEDLE BEARING | (1) |
| 7 | 110-05204 | NEEDLE BAR CRANK | (1) |
| 8 | B1408-552-000 | NEEDLE BAR CRANK ROD | (1) |
| 9 | B1903-552-000 | LEFT SCREW | (1) |
| 10 | 229-03157 | COUNTER WEIGHT ASM. | 1 |
| 11 | SS-8681650-TP | SCREW 9/32-28 L=16 | (1) |
| 12 | SS-8660610-TP | SCREW 1/4-40 L=6 | (2) |
| 13 | RO-0442401-00 | RUBBER RING | (1) |
| 14 | SS-7681650-TP | SCREW 9/32-28 L=16 | (1) |
| 15 | 229-03108 | COUNTER WEIGHT | (1) |
| 16 | 229-10053 | FEED DRIVE ECCENTRIC CAM ASM. | 1 |
| 17 | SS-6661110-SP | SCREW 1/4-40 L=11 | (2) |
| 18 | 229-10004 | FEED DRIVE ECCENTRIC CAM | (1) |
| 19 | SS-4090615-SP | SCREW 9/64-40 L=6 | 2 |
| 20 | 110-02409 | MAIN SHAFT BUSHING, REAR | 1 |
| 21 | 110-02508 | OIL SEAL | 1 |
| 22 | RC-1850001-KP | SNAP RING 18.5 | 1 |
| 23 | 229-04155 | THRUST COLLAR ASM. | 1 |
| 24 | SS-8660610-TP | SCREW 1/4-40 L=6 | (2) |
| 25 | 229-03207 | MAIN SHAFT FRONT BUSHING | 1 |
| 26 | B1215-552-000 | OIL ADJUSTING COLLAR | 1 |
| 27 | 229-03306 | BUSHING,INTERMEDIATE | 1 |
| 28 | EA-9500B01-00 | CABLE BAND | 1 |
| 29 | 229-19203 | RUBBER | 1 |
| 30 | 229-37064 | HAND WHEEL COMPL. | 1 |
| 31 | 400-17623 | HAND WHEEL ASM. | 1 |
| 32 | WP-0450801-SD | WASHER 4.5X10X0.8 | (2) |
| 33 | SS-8151550-SP | SCREW 15/64-28 L=15 | (2) |
| 34 | 229-37056 | HAND WHEEL ASM. | (1) |
| 35 | 229-37155 | MAGNET FITTING BASE A ASM. | (1) |
| 36 | 229-37254 | MAGNET FITTING BASE B ASM. | (1) |
| 37 | SS-6111210-SP | SCREW 11/64-40 L=12 | (2) |
| 38 | 400-17625 | MAGNET FITTING BASE B ASM. | (1) |
| 39 | 400-17624 | MAGNET FITTING BASE A ASM. | (1) |
| 40 | 229-03900 | OIL AMOUNT ADJUSTING PIN | 1 |
| 41 | RO-0291801-00 | RUBBER RING | 1 |
| 42 | 229-10103 | THRUST COLLAR | 1 |
| 43 | 229-37965 | DYNAMO STATOR | 1 |
| 44 | 229-03009 | MAIN SHAFT | 1 |
| 45 | SL-4051001-MZ | SCREW M5 L=9.6 | 2 |
Page 9 — 3. NEEDLE BAR, UPRIGHT SHAFT & HOOK DRIVING SHAFT COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-01409 | CAP | 1 |
| 2 | 229-06101 | NEEDLE BAR BUSHING, UPPER | 1 |
| 3 | 229-39508 | NEEDLE BAR | 1 |
| 4 | 229-06457 | NEEDLE ROD HOLDER ASM. | 1 |
| 5 | SS-6090670-TP | SCREW 9/64-40 L=6 | (1) |
| 6 | B1414-555-000 | SLIDE BLOCK | 1 |
| 7 | 229-20805 | NEEDLE BAR THREAD GUIDE | 1 |
| 8 | 229-06200 | NEEDLE BAR BUSHING, LOWER | 1 |
| 9 | SS-7080510-TP | SCREW 1/8-44 L=4.5 | 1 |
| 10 | 229-06309 | NEEDLE BAR THREAD GUIDE | 1 |
| 11 | MDB-100B1400 | NEEDLE DBX1 #14 | 1 |
| 12 | B1306-155-0C0 | GEAR & PINION ASM. | 1 |
| 13 | B1306-155-0B0 | GEAR & PINION ASM., UPPER | (1) |
| 14 | B1305-012-0A0 | GEAR ASM. | (1) |
| 15 | SS-8660810-TP | SCREW 1/4-40 L=8 | (2) |
| 16 | B1306-155-0A0 | PINION ASM. | (1) |
| 17 | SS-8660810-TP | SCREW 1/4-40 L=8 | (2) |
| 18 | B1307-155-0B0 | GEAR & PINION ASM., LOWER | (1) |
| 19 | B1307-155-0A0 | GEAR ASM. LARGE | (1) |
| 20 | SS-8660810-TP | SCREW 1/4-40 L=8 | (2) |
| 21 | B1308-155-0A0 | PINION ASM. | (1) |
| 22 | SS-8660810-TP | SCREW 1/4-40 L=8 | (2) |
| 23 | 229-05004 | UPRIGHT SHAFT | 1 |
| 24 | 111-41355 | HOOK ASM. | 1 |
| 25 | 229-05103 | UPRIGHT SHAFT BUSHING, LOWER | 1 |
| 26 | 229-05202 | UPRIGHT SHAFT BUSHING, LOWER | 1 |
| 27 | 229-16308 | BUSHING, REAR | 1 |
| 28 | MC-2005009-00 | NEEDLE 134 90 | 1 |
| 29 | 229-17157 | THRUST COLLAR ASM. | 1 |
| 30 | SS-6110420-TP | SCREW 11/64-40 L=4.8 | (2) |
| 31 | 229-16001 | LOWER SHAFT | 1 |
| 32 | 229-42502 | BOBBIN CASE HOLDER | 1 |
| 33 | SS-4110915-TP | SCREW 11/64-40 L=9 | 1 |
| 34 | 110-38650 | HOOK ASM. | 1 |
| 35 | 229-16100 | LOWER SHAFT FRONT METAL | 1 |
| 36 | 229-17058 | THRUST COLLAR ASM. | 1 |
| 37 | SS-8110410-TP | SCREW 11/64-40 L= 3.5 | (2) |
| 38 | 229-16555 | OIL SEAL SCREW ASM. | 1 |
| 39 | 110-15906 | OIL WICK | (1) |
| 40 | 229-16506 | OIL SEAL SCREW | (1) |
| 41 | 229-32909 | BOBBIN | 1 |
| 42 | 110-38759 | BOBBIN CASE ASM. | 1 |
| 43 | 229-42601 | OIL SHIELD | 1 |
| 44 | 229-39607 | NEEDLE BAR B | 1 |
| 45 | SS-4120915-SP | SCREW 3/16-28 L=9 | 1 |
| 46 | 400-12444 | NEEDLE BAR THREAD GUIDE | 1 |
| NOTE (注記) | NEEDLE BAR THREAD GUIDE |
Page 11 — 4. HAND LIFTER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-07802 | HAND LIFTER | 1 |
| 2 | B1521-555-000 | SCREW | 1 |
| 3 | RO-0371801-00 | RUBBER RING | 1 |
| 4 | 229-08552 | HAND LIFTER CAM ASM. | 1 |
| 5 | 400-14007 | PRESSER BAR BUSHING LOWER | 1 |
| 6 | SS-7091110-TP | SCREW 9/64-40 L=10.5 | 1 |
| 7 | 229-08701 | LINK SHAFT | 2 |
| 8 | RE-0500000-KO | E-RING | 3 |
| 9 | B1524-012-0BA | PRESSER FOOT ASM. | 1 |
| 10 | 229-44706 | WIRE HOLDER BRACKET, LOWER | 1 |
| 11 | 229-08909 | HINGE SCREW | 1 |
| 12 | SD-0720331-SP | HINGE SCREW D= 7.24 H= 3.3 | 1 |
| 13 | 229-09006 | KNEE LIFTER CONNECTING ROD | 1 |
| 14 | 229-08800 | LIFTING LEVER LINK | 1 |
| 15 | SS-7110410-SP | SCREW 11/64-40 L=4 | 1 |
| 16 | SS-7110720-SP | SCREW 11/64-40 L=7 | 1 |
| 17 | SS-4150915-SP | SCREW 15/64-28 L=9 | 1 |
| 18 | 229-44508 | WIRE HOLDER A | 2 |
| 19 | SS-4120615-SP | SCREW 3/16-28 L=6 | 1 |
| 20 | 229-44607 | WIRE HOLDER BRACKET, UPPER | 1 |
| 21 | NS-6620310-SP | NUT 3/16-32 | 2 |
| 22 | RE-0500000-KO | E-RING | 2 |
| 23 | 229-20201 | TENSION RELEASE RETURN SPRING | 1 |
| 24 | 229-20409 | THREAD RELEASE PIN SPRING | 1 |
| 25 | 229-45109 | WIRE CABLE HOLDER | 1 |
| 26 | 229-20300 | TENSION RELEASE SUPPORTING PIN | 1 |
| 27 | SS-4120615-SP | SCREW 3/16-28 L=6 | 1 |
| 28 | 110-45952 | THREAD TENSION RELEASE WIRE | 1 |
| 29 | 229-20102 | TENSION RELEASE SHAFT | 1 |
| 30 | 229-07554 | PRESSER SPRING REG NUT ASM. | 1 |
| 31 | 229-07604 | PRESSER ADJUSTING SCREW NUT | (1) |
| 32 | 229-07505 | PRESSER SPRING REGULATOR | (1) |
| 33 | 229-07406 | PRESSER ADJUSTING SPRING | 1 |
| 34 | 229-07208 | PRESSER BAR GUIDE BRACKET | 1 |
| 35 | 229-07000 | PRESSER BAR | 1 |
| 36 | 229-07307 | PRESSER BAR THREAD GUIDE | 1 |
| 37 | SS-8660810-TP | SCREW 1/4-40 L=8 | 1 |
| 38 | SS-6090910-SP | SCREW 9/64-40 L=9 | 2 |
| 39 | 229-08354 | KNEE LIFTING CROSS ROD ASM. | 1 |
| 40 | 229-08156 | HAND LIFTER LINK | (1) |
| 41 | RE-0500000-KO | E-RING | (1) |
| 42 | 229-08008 | LIFTING LEVER | (1) |
| 43 | RE-0500000-KO | E-RING | (1) |
| 44 | 229-08305 | KNEE LIFTING CROSS ROD | (1) |
| 45 | 229-07703 | PRESSER GUIDE BAR | 1 |
Page 13 — 5. FEED MECHANISM COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-41108 | FEED ADJUST ROD | 1 |
| 2 | 229-11507 | FEED REGULATOR PIN | 1 |
| 3 | SS-6090670-TP | SCREW 9/64-40 L=6 | 2 |
| 4 | 229-11606 | FEED REGULATOR | 1 |
| 5 | 229-11705 | FEED REGULATOR BUSHING | 1 |
| 6 | SS-7120770-SH | SCREW 3/16-28 L=7 | 1 |
| 7 | 229-11804 | FEED REGULATOR SCREW | 1 |
| 8 | 229-12109 | SPRING | 1 |
| 9 | 229-12000 | FEED ADJUST PIN | 1 |
| 10 | 229-40506 | FEED DIAL | 1 |
| 11 | SS-6121860-SP | SCREW 3/16-28 L=18 | 1 |
| 12 | 229-10202 | ROCKER SHAFT CONNECTING ROD | 1 |
| 13 | 229-11101 | WALKING FOOT PIN C | 1 |
| 14 | SS-6090620-TP | SCREW | 1 |
| 15 | 229-15003 | CONNECTING ROD | 1 |
| 16 | RO-0922702-00 | RUBBER RING | 1 |
| 17 | 110-10311 | FEED REVERSE SPRING | 1 |
| 18 | RE-0500000-KO | E-RING | 1 |
| 19 | 229-12257 | FEED REVERSE ARM ASM. | 1 |
| 20 | 229-12505 | SCREW | 1 |
| 21 | RE-0500000-KO | E-RING | 1 |
| 22 | 110-37405 | SPRING | 1 |
| 23 | 229-11408 | FEED REGULATOR CONNCTING ROD | 1 |
| 24 | 229-10905 | WALKING FOOT PIN A | 2 |
| 25 | 229-10707 | CONNECTING LINK B | 2 |
| 26 | 229-10608 | CONNECTING LINK A | 2 |
| 27 | 229-40951 | FEED ADJUST LINK ASM. | 1 |
| 28 | 229-10806 | ADJUSTING LINK FULCRUM SHAFT A | 2 |
| 29 | SS-8150710-TP | SCREW 15/64-28 L=7 | 2 |
| 30 | SS-6090620-TP | SCREW | 2 |
| 31 | 229-40803 | FEED BAR SHAFT | 1 |
| 32 | RC-0150001-KP | RETAINING RING 13.8 | 1 |
| 33 | B1613-012-100 | FEED DOG I | 1 |
| 34 | SS-4080620-TP | SCREW 1/8-44 L=6 | 2 |
| 35 | 229-40753 | FEED BAR ASM. | 1 |
| 36 | 229-41306 | ADJUSTING LINK SPRING GUIDE | 1 |
| 37 | SS-4110515-SP | SCREW 11/64-40 L=5 | 2 |
| 38 | 229-13701 | FEED SPRING HOOK | 1 |
| 39 | 229-12901 | FEED ROCKER SHAFT | 1 |
| 40 | 229-11002 | WALKING FOOT PIN B | 1 |
| 41 | SS-6090620-TP | SCREW | 1 |
| 42 | NS-6680410-SP | NUT 9/32-28 | 1 |
| 43 | 229-10350 | FEED ROCKER SHAFT CRANK ASM. | 1 |
| 44 | SS-6121610-SP | SCREW 3/16-28 L=15.5 | (1) |
| 45 | 229-15151 | FEED ARM COMPL. | 1 |
| 46 | SS-7121610-SP | SCREW 3/16-28 L=15.5 | (1) |
| 47 | SD-1000801-SH | HINGE SCREW D=10 H=8 | 1 |
| 48 | 229-15201 | FEED DRIVING SHAFT | 1 |
| 49 | 229-04155 | THRUST COLLAR ASM. | 1 |
| 50 | SS-8660610-TP | SCREW 1/4-40 L=6 | (2) |
| 51 | 229-13008 | FEED ROCKER SHAFT BUSHING | 2 |
| 52 | 229-13800 | HORIZONTAL FEED ROD B | 1 |
| 53 | SS-7110740-TP | SCREW 11/64-40 L=7 | 1 |
| 54 | RC-0150001-KP | RETAINING RING 13.8 | 1 |
| 55 | 229-40654 | FEED BAR CRANK ASM. | 1 |
| 56 | SS-7121410-TP | SCREW 3/16-28 L=14 | (1) |
| 57 | WP-0480856-SP | WASHER 4.8X8.4X0.8 | (1) |
| 58 | 229-15359 | DRIVING SHAFT CRANK ASM. | 1 |
| 59 | SS-7111120-SP | SCREW 11/64-40 L=10.5 | (1) |
| 60 | 229-10459 | WALKING FOOT ADJUSTING LINK | 1 |
| 61 | 229-04155 | THRUST COLLAR ASM. | 1 |
| 62 | SS-8660610-TP | SCREW 1/4-40 L=6 | (2) |
| 63 | RO-0781901-00 | RUBBER RING | 1 |
| 64 | 229-12604 | FEED REVERSE SHAFT | 1 |
| 65 | 229-12802 | FEED LEVER METAL | 1 |
| 66 | 229-12752 | FEED LEVER ASM. | 1 |
| 67 | SM-8061050-TP | SCREW | (1) |
| 68 | SM-8061010-TP | SCREW | (1) |
| 69 | 229-14105 | BEARING C | 1 |
| 70 | B1613-012-A00 | FEED DOG A | 1 |
| 71 | 110-09800 | FEED REGULATOR BUSHING | 1 |
| 229-10808 | CONNECTING LINK A | 2 |
Page 15 — 6. THREAD TRIMMER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 110-40359 | KNIFE UNIT | 1 |
| 2 | SD-0460703-TP | HINGE SCREW D=4.6 H=7 | (1) |
| 3 | 110-40508 | FORKED BASE FOR KNIFE | (1) |
| 4 | 110-40409 | MOVING KNIFE HINGE SCREW | (1) |
| 5 | 110-40052 | MOVING KNIFE ASM. | (1) |
| 6 | 110-40300 | KNIFE MOUNTING BASE | (1) |
| 7 | 110-40201 | THREAD GUIDE FOR KNIFE | (1) |
| 8 | SS-2060210-SP | SCREW 3/32-56 L=2.3 | (1) |
| 9 | SS-4080620-TP | SCREW 1/8-44 L=6 | (2) |
| 10 | D2406-555-DOH | COUNTER KNIFE | (1) |
| HK-0346101-40 | HOUSING 14P | ||
| SS-4110715-SP | SCREW 11/64-40 L=7 | ||
| 229-50257 | PICKER ARM ASM. | ||
| 229-50208 | PICKER ARM | ||
| SS-6090510-TP | SCREW 9/64-40 L=5.0 | ||
| SD-0641451-SP | HINGE SCREW D= 6.35 H=14.5 | ||
| SD-0630275-SP | HINGE SCREW D= 6.35 H= 2.7 | ||
| 110-42850 | THREAD TRIMMER CAM ASM. | ||
| SS-6660610-TP | SCREW 1/4-40 L=6 | ||
| 229-50950 | CAM COLLAR ASM. | ||
| SS-8110520-TP | SCREW 11/64-40 L=4.5 | ||
| 229-49762 | THREAD TRIMMER DRIVING UNIT | ||
| 229-49754 | BASE PLATE ASM. | ||
| 229-50703 | DRIVING ARM STOPPE | ||
| 229-50000 | PICKER LINK PIN | ||
| RE-0600000-KO | E-RING 6 | ||
| 229-49408 | CLUTCH SPRING | ||
| 110-41852 | CLUTCH PLATE ASM. | ||
| 229-50109 | PICKER LINK | ||
| WP-0621016-SH | WASHER | ||
| NS-6150430-SP | NUT 15/64-28 | ||
| 229-48301 | MOVING KNIFE LINK | ||
| RE-0500000-KO | E-RING | ||
| 229-49309 | MOVING KNIFE LINK PIN | ||
| RE-0400000-KO | E-RING 4 | ||
| 229-49200 | ROLLER FULCRUM SPRING | ||
| 229-49002 | ROLLER ARM BRACKET | ||
| 110-40953 | ROLLER ARM ASM. | ||
| 110-40854 | KNIFE DRIVING ARM ASM. | ||
| SS-4150915-SP | SCREW 15/64-28 L=9 | ||
| SD-0640631-TP | HINGE SCREW D=6.35 H=6.3 | ||
| 229-51164 | SOLENOID UNIT | ||
| 229-49903 | CLUTCH LINK | ||
| 110-43205 | SOLENOID RUBBER A | ||
| 229-51404 | SOLENOID BASE | ||
| WP-0450000-SD | WASHER 4.5X8X0.5 | ||
| 110-43304 | SOLENOID RUBBER | ||
| NS-6660410-SH | NUT | ||
| NS-6660430-SP | NUT 1/4-40 | ||
| 229-51008 | SOLENOID PIN | ||
| SD-0600361-SP | HINGE SCREW D=6 H=3.6 | ||
| SS-4151215-SP | SCREW 15/64-28 L=12 | ||
| 229-24807 | TUBE HOLDER, LOWER | ||
| 229-51552 | GROUND WIRE ASM. |
Page 16 — 7.AUTOMATIC REVERSE FEED COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-54150 | REVERSE FEED SWITCH ASM. | 1 |
| 2 | 229-54606 | REVERSE FEED SWITCH COVER | (1) |
| 3 | SM-4040655-SP | SCREW M4 L=6 | (1) |
| 4 | 229-54101 | REVERSE FEED SWITCH BASE | (1) |
| 5 | 229-54200 | REVERSE FEED SWITCH SHAFT | (1) |
| 6 | 229-54309 | REVERSE FEED SWITCH SPRING | (1) |
| 7 | SM-4041655-SP | SCREW M4 L=16 | (1) |
| 8 | SM-4031501-SC | SCREW M3 L=15 | (2) |
| 9 | HW-5000700-00 | 2-CORE CABTYRE CORD | (1.31) |
| 10 | HK-0346400-0B | PIN CONTACT | (2) |
| 11 | HA-0019000-00 | MICROSWITCH | (1) |
| 12 | 229-54408 | SWITCH HOLDING PLATE | (1) |
| 13 | 229-54507 | REVERSE FEED SWITCH LEVER | (1) |
| 14 | RE-0500000-KP | E-RING 5 | 2 |
| 15 | 229-53806 | REVERSE FEED CONNECTING SHAFT | 1 |
| 16 | RE-0900000-KO | E-RING 9 | 1 |
| 17 | 229-53657 | CONNECTING ARM ASM. | 1 |
| 18 | RE-0400000-KP | E-RING 4 | 1 |
| 19 | 229-53905 | REVERSE FEED CONNECTING LINK | 1 |
| 20 | RE-1200000-KO | E-RING 12 | 1 |
| 21 | WP-1602616-SZ | WASHER 16X24X2.6 | 1 |
| 22 | D2468-555-B00 | RUBBER PLUNGER | 1 |
| 23 | RE-0400000-KO | E-RING 4 | 2 |
| 24 | 229-53509 | PLUNGER ARM PIN | 1 |
| 25 | 111-02753 | REVERSE FEED MAGNET ASM. | 1 |
| 26 | SS-4151215-SP | SCREW 15/64-28 L=12 | 2 |
| 27 | SS-4120915-SP | SCREW 3/16-28 L=9 | 1 |
| 28 | 229-54002 | PLUNGER SPRING | 1 |
| 29 | HK-0346400-0B | PIN CONTACT | 2 |
| 30 | SS-4120615-SP | SCREW 3/16-28 L=6 | 1 |
Page 17 — 8. WIPER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-55553 | WIPER ASM. | 1 |
| 2 | 229-55504 | WIPER COVER | (1) |
| 3 | SL-4030631-SC | SCREW M3X6 | (1) |
| 4 | SD-0650321-TP | HINGE SCREW D=6.5 H=3.2 | (1) |
| 5 | NS-6090310-SP | NUT 9/64-40 | (1) |
| 6 | 229-56106 | WIPER LINK A | (1) |
| 7 | 229-56403 | WIPER LINK B | (1) |
| 8 | RE-0250000-KO | E-RING 2.5 | (1) |
| 9 | 229-56908 | WIPER LINK B, HINGE SCREW | (1) |
| 10 | 229-56205 | WIPER HINGE SCREW COLLAR | (1) |
| 11 | 229-56304 | WIPER SPRING | (1) |
| 12 | NS-6110310-SP | NUT 11/64-40 | (1) |
| 13 | 229-55900 | WIPER RUBBER A | (1) |
| 14 | 229-56007 | WIPER RUBBER B | (1) |
| 15 | 111-10301 | WIPER SOLENOID | (1) |
| 16 | 229-57104 | WIPER SOLENOID SHAFT | (1) |
| 17 | HA-0005900-00 | POWER SWITCH | (1) |
| 18 | HW-2003900-00 | ELECTRIC WIRE | (0.04) |
| 19 | HW-5000700-00 | 2-CORE CABTYRE CORD | (1.33) |
| 20 | 111-10152 | WIPER BASE ASM. | (1) |
| 21 | 229-57203 | WIPER LINK COLLAR | (1) |
| 22 | SL-4030641-SE | SCREW | (3) |
| 23 | HK-0346400-OB | PIN CONTACT | (2) |
| 24 | 229-57005 | WIPER | (1) |
| 25 | SS-6090540-SP | SCREW 9/64-40 L= 5.0 | (1) |
| 26 | 229-56809 | WIPER COLLAR | (1) |
| 27 | RE-0500000-KO | E-RING | (1) |
| 28 | 111-11051 | WIPER DRIVING SHAFT ASM. | (1) |
| 29 | SS-4120915-SP | SCREW 3/16-28 L=9 | 1 |
Page 19 — 9. OIL LUBRICATION COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-47006 | OIL SIGHT WINDOW | 1 |
| 2 | RO-1952401-00 | RUBBER RING | 1 |
| 3 | 229-24401 | MAIN SHAFT OIL TUBE | 1 |
| 4 | SS-4120615-SP | SCREW 3/16-28 L=6 | 1 |
| 5 | 229-25101 | OIL FELT PRESSER | 1 |
| 6 | 229-24153 | OIL RETURN TUBE ASM. | 1 |
| 7 | 229-24302 | HOLDER | (1) |
| 8 | CQ-2520000-00 | OIL WICK | 0.3 |
| 9 | 229-25002 | OIL ADJUSTING SCREW | 1 |
| 10 | 229-24906 | SPRING | 1 |
| 11 | 229-24500 | OIL TUBE | 1 |
| 12 | 229-23056 | LUBRICATING OIL PUMP ASM. | 1 |
| 13 | 229-23312 | OIL PUMP INSTALLING BASE | (1) |
| 14 | 229-23015 | OIL PUMP | (1) |
| 15 | 229-23700 | OIL PUMP IMPELLER | (1) |
| 16 | SE-4301041-SR | SCREW D=3 L=10 | (3) |
| 17 | 229-23205 | LUBRICATING OIL PUMP COVER | (1) |
| 18 | 229-23809 | OIL PUMP IMPELLER COVER | (1) |
| 19 | 229-23403 | PLUNGER | (1) |
| 20 | 229-23601 | PLUNGER SPRING | (1) |
| 21 | 229-23502 | PLUNGER SCREW | (1) |
| 22 | 229-23908 | HOOK DRIVING SHAFT OIL TUBE | (1) |
| 23 | SL-4030851-SF | SCREW M3 L=8 | (3) |
| 24 | SS-4150915-SP | SCREW 15/64-28 L=9 | 1 |
| 25 | SS-6111010-TP | SCREW 11/64-40 L= 9.5 | 1 |
| 26 | 229-47105 | OIL PUMP SUPPORT | 1 |
| 27 | SS-4151215-SP | SCREW 15/64-28 L=12 | 1 |
| 28 | 229-24609 | RUBBER JOINT | 1 |
| 29 | WS-0451040-KP | SPRING WASHER 4.5X8.5X1 | 1 |
| 30 | 229-24005 | OIL PUMP SUPPORT | 1 |
| 31 | WS-0651310-KP | SPRING WASHER 6.5X11X1.3 | 1 |
Page 21 — 10. OIL RESERVOIR COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-31851 | OIL RESERVOIR ASM. | 1 |
| 2 | 229-31802 | OIL RESERVOIR | (1) |
| 3 | 229-31901 | OIL RESERVOIR GASKET | (1) |
| 4 | 229-32008 | RUBBER CUSHION | (4) |
| 5 | SS-6700710-SH | SCREW 5/16-24 L=7 | (1) |
| 6 | RO-1082401-00 | RUBBER RING | (1) |
| 7 | 229-32156 | KNEE LIFTER ROTATION ARM ASM. | (1) |
| 8 | 229-32107 | KNEE LIFTING ROTATING ARM | (1) |
| 9 | NM-6060001-SE | NUT M6 | (2) |
| 10 | SM-8063012-TR | SCREW M6 L=30 | (2) |
| 11 | 229-32206 | SPRING | (1) |
| 12 | RE-1000000-KO | E-RING 10 | (1) |
| 13 | 229-32453 | BRACKET ASM. | (1) |
| 14 | 229-32404 | VERTICAL SHAFT FITTING ARM | (1) |
| 15 | 229-34707 | SCREW | (2) |
| 16 | SM-9061853-SR | SCREW M6 L=17.5 | (1) |
| 17 | 229-32305 | KNEE PRESS CROSS SHAFT | (1) |
| 18 | 229-34251 | KNEE PAD PLATE ASM. | 1 |
| 19 | 229-34509 | KNEE PAD PLATE COVER | (1) |
| 20 | 229-34608 | KNEE PAD UPRIGHT SHAFT | (1) |
| 21 | 229-34400 | KNEE PAD PLATE RUBBER | (1) |
| 22 | 229-34202 | KNEE PAD PLATE | (1) |
| 23 | 229-34301 | KNEE PAD PLATE SUPPORT | (1) |
| 24 | SM-9061203-SE | SCREW M6 L=12 | (1) |
| 25 | 229-31703 | KNEE LIFTER PUSH ROD | 1 |
| 26 | B8228-125-000 | OIL RESERVOIR MAGNET | 1 |
Page 22 — 11. BELT COVER & BOBBIN COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-33451 | BELT COVER ASM. | 1 |
| 229-33402 | BELT COVER A | ||
| 229-33501 | BELT COVER A CAP | ||
| 229-33659 | BELT COVER B COMPL. | ||
| 229-33600 | BELT COVER B | ||
| 229-33758 | BELT COVER B CAP ASM. | ||
| 229-33907 | BELT COVER SUPPORT | ||
| 229-34004 | BELT COVER A SCREW | ||
| WP-0501016-SD | WASHER 5X10.5X1 | ||
| SK-3412000-SC | WOOD SCREW D=4.1 L=20 | ||
| WP-0450826-SC | WASHER 4.5X10X0.8 | ||
| 229-27354 | BOBBIN WINDER CONPL. | ||
| 229-28501 | THREAD TENSION BRACKET | ||
| SS-4110515-SP | SCREW 11/64-40 L=5 | ||
| 229-28709 | THREAD TENSION SPRING | ||
| 229-29004 | THREAD TENSION SPRING | ||
| 229-28808 | THREAD TENSION NUT | ||
| SS-7110350-SP | SCREW 11/64-40 L=3.5 | ||
| 229-28402 | RUBBER BRAKE PRESSER PLATE | ||
| 229-28105 | HINGE SCREW | ||
| SD-0490261-SP | SCREW D=4.9 H=2.6 | ||
| SS-7081310-SP | SCREW 1/8-44 L=12.5 | ||
| SS-8110510-SP | SCREW 11/64-40 L=5 | ||
| 229-27305 | BOBBIN BASE | ||
| 229-27404 | BOBBIN PULLEY | ||
| 229-27602 | BOBBIN WINDER POST |
Page 23 — 12. THREAD STAND COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-30358 | THREAD STAND ASM. | 1 |
| 2 | 229-31109 | SPOOL RETAINER | (2) |
| 3 | 229-31000 | SPOOL PIN | (2) |
| 4 | 229-30903 | SPOOL REST CUSHION | (2) |
| 5 | 229-30804 | SPOOL REST | (2) |
| 6 | SM-6061610-SC | SCREW M6 L=16 | (2) |
| 7 | 229-30705 | THREAD GUIDE ARM JOINT | (2) |
| 8 | 229-31406 | SPOOL REST ROD RUBBER CAP | (1) |
| 9 | 229-30507 | SPOOL REST ARM | (2) |
| 10 | 229-30408 | SPOOL REST ROD, UPPER | (1) |
| 11 | 229-31307 | SPOOL REST ROD JOINT | (1) |
| 12 | SM-4051405-SE | SCREW M5 L=14 | (2) |
| 13 | NM-6050001-SE | NUT M5 | (2) |
| 14 | 229-30309 | SPOOL REST ROD, LOWER | (1) |
| 15 | 229-31208 | THREAD GUIDE | (2) |
| 16 | WS-0510002-KN | SPRING WASHER | (2) |
| 17 | NM-6050001-SE | NUT M5 | (2) |
| 18 | NM-6160511-SE | NUT M16X1.5 | (1) |
| 19 | WP-1612616-SE | WASHER 16X30X2.6 | (2) |
| 20 | WS-1643202-KR | SPRING WASHER | (1) |
Page 25 — 13. EXCLUSIVE PARTS FOR DDL-8700H-7
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 110-96062 | THREAD CUTTING DRIVING UNIT | 1 |
| 2 | 110-95551 | KNIFE UNIT | 1 |
| 3 | 114-09257 | MOVING KNIFE J ASM. | (1) |
| 4 | 110-95502 | KNIFE MOUNT BASE | (1) |
| 5 | 114-09604 | FIX KNIFE | (1) |
| 6 | 110-95403 | KNIFE THREAD GUIDE | (1) |
| 7 | 110-95601 | KNIFE BRANCH | (1) |
| 8 | SD-0500131-TP | HINGE SCREW D=5 H=1.25 | (1) |
| 9 | D2404-555-B00 | COUNTER KNIFE SPACER | (1) |
| 10 | SD-0460703-TP | HINGE SCREW D=4.6 H=7 | (1) |
| 11 | SS-2060210-SP | SCREW 3/32-56 L=2.3 | (1) |
| 12 | SS-4080620-TP | SCREW 1/8-44 L=6 | (2) |
| 13 | 400-10395 | ADJUSTING LINK FULCRUM SHAFT B | 1 |
| 14 | 114-00801 | THROAT PLATE J | 1 |
| 15 | B1213-552-000-A | OIL ADJUSTING PIN | 1 |
| 16 | SS-6080320-SP | SCREW 1/8-44 L= 2.5 | 1 |
| 17 | 110-95254 | LEVER STOPPER ASM. | 1 |
| 18 | SS-1120710-SP | SCREW 3/16-28 L=6.5 | 1 |
| 19 | 110-91659 | LINK THREAD TAKE-UP LEVER ASM. | 1 |
| 20 | 110-91600 | NEEDLE BAR CRANK H | (1) |
| 21 | MDB-100B2100 | NEEDLE DBX1 #21 | 1 |
| 22 | B1418-415-H00 | NEEDLE BAR THREAD GUIDE | 1 |
| 23 | 229-70313 | NEEDLE BAR BUSHING,LOWER | 1 |
| 24 | B1419-553-000 | NEEDLE BAR THREAD GUIDE | 1 |
| 25 | 229-70206 | NEEDLE BAR | 1 |
| 26 | 110-92251 | LUBRICATING BOBBIN ASM. | 1 |
| 27 | 110-93804 | POSITIONING FINGER H | 1 |
| 28 | B1505-552-000-A | PRESSER SPRING | 1 |
| 29 | D1524-555-EBL | PRESSER FOOT ASM. | 1 |
| 30 | 229-62807 | WIRE PRESSER PLATE(LOWER),B | 1 |
| 31 | SS-7110740-TP | SCREW 11/64-40 L=7 | 1 |
| 32 | M6009-350-AAA | RESISTANCE PACK AA ASM. | 1 |
| 33 | 229-11903 | FEED DIAL | 1 |
| 34 | 110-91204 | ADJUST LINK SPRING | 1 |
| 35 | 229-62203 | FEED SPRING HOOK | 1 |
| 36 | 114-03003 | FEED J | 1 |
| 37 | 110-96658 | SOLENOID MOUNTING BASE ASM. | 1 |
| 38 | 112-31503 | OIL PUMP SUPPORT | 1 |
| 39 | 229-62609 | REVERSE FEED BASE COLLAR | 1 |
| 40 | 229-62906 | PLUNGER ARM PIN | 1 |
| 41 | NS-6110420-SP | NUT 11/64-40 | 2 |
| 42 | 229-62708 | TUBE HOLDER, LOWER | 1 |
| 43 | 110-94109 | OIL TUBE | 1 |
| 44 | SD-0700711-TP | HINGE SCREW D=7 H=7.1 | 1 |
| 45 | 229-62500 | SOLENOID CONNECTING LINK,H | 1 |
| 46 | WP-0722316-SH | WASHER | 1 |
| 47 | 111-01508 | REVERSE FEED LINK | 1 |
| 48 | NS-6110420-SP | NUT 11/64-40 | 1 |
| 49 | SD-0700451-TP | HINGE SCREW D=7 H=4.5 | 1 |
| 50 | MC-2005013-00 | NEEDLE 134 NM130 | 1 |
| 51 | 229-62351 | FEED DRIVE ECCENTRIC CAM ASM. | 1 |
| 52 | 114-03805 | THREAD GUIDE C FITTING PLATE | 1 |
| 53 | WP-0371016-SD | WASHER 3.7X8X1 | 1 |
| 54 | NS-6090310-SP | NUT 9/64-40 | 1 |
| 55 | 113-05513 | ARM THREAD GUIDE, C | 1 |
| 56 | 110-94604 | CLUTCH LINK | 1 |
| 57 | 110-96500 | THREAD TRIMMER SOLENOID | 1 |
| 58 | SD-0550701-TP | STEP-SCREW D=5.5 H=7 | 1 |
| 59 | 110-94901 | SOLENOID BASE | 1 |
| 60 | 229-63458 | THREAD TENSION ASM. | 1 |
| 61 | 229-63409 | THREAD TENSION SPRING | (1) |
| 62 | 229-62054 | THREAD TENSION ASM. | 1 |
| 63 | 229-62005 | THREAD TENSION SPRING | (1) |
Page 27 — 14. EXCLUSIVE PARTS FOR DDL-8700J-7
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 110-96062 | THREAD CUTTING DRIVING UNIT | 1 |
| 2 | 110-95551 | KNIFE UNIT | 1 |
| 3 | 114-09257 | MOVING KNIFE J ASM. | (1) |
| 4 | 110-95502 | KNIFE MOUNT BASE | (1) |
| 5 | 114-09604 | FIX KNIFE | (1) |
| 6 | 110-95403 | KNIFE THREAD GUIDE | (1) |
| 7 | 110-95601 | KNIFE BRANCH | (1) |
| 8 | SD-0500131-TP | HINGE SCREW D=5 H=1.25 | (1) |
| 9 | D2404-555-B00 | COUNTER KNIFE SPACER | (1) |
| 10 | SD-0460703-TP | HINGE SCREW D=4.6 H=7 | (1) |
| 11 | SS-2060210-SP | SCREW 3/32-56 L=2.3 | (1) |
| 12 | SS-4080620-TP | SCREW 1/8-44 L=6 | (2) |
| 13 | 400-10395 | ADJUSTING LINK FULCRUM SHAFT B | 1 |
| 14 | 114-00801 | THROAT PLATE J | 1 |
| 15 | B1213-552-000-A | OIL ADJUSTING PIN | 1 |
| 16 | SS-6080320-SP | SCREW 1/8-44 L= 2.5 | 1 |
| 17 | 110-95254 | LEVER STOPPER ASM. | 1 |
| 18 | SS-1120710-SP | SCREW 3/16-28 L=6.5 | 1 |
| 19 | 110-62858 | LINK THREAD TAKE-UP LEVER ASM. | 1 |
| 20 | 110-62809 | NEEDLE BAR CRANK | (1) |
| 21 | MDP-500B2100 | NEEDLE DPX5 #21 | 1 |
| 22 | 229-70404 | NEEDLE BAR THREAD HOOK | 1 |
| 23 | 229-70313 | NEEDLE BAR BUSHING,LOWER | 1 |
| 24 | 400-12444 | NEEDLE BAR THREAD GUIDE | 1 |
| 25 | 229-70206 | NEEDLE BAR | 1 |
| 26 | 400-35058 | HOOK ASM. | 1 |
| 27 | 229-42502 | INNER HOOK PRESSER | 1 |
| 28 | B1505-552-000-A | PRESSER SPRING | 1 |
| 29 | D1524-555-EBL | PRESSER FOOT ASM. | 1 |
| 30 | 229-62807 | WIRE PRESSER PLATE(LOWER),B | 1 |
| 31 | SS-7110740-TP | SCREW 11/64-40 L=7 | 1 |
| 32 | M6009-350-AAA | RESISTANCE PACK AA ASM. | 1 |
| 33 | 400-31248 | FEED DIAL | 1 |
| 34 | WP-0371016-SD | WASHER 3.7X8X1 | 1 |
| 35 | 229-70602 | FEED SPRING HOOK | 1 |
| 36 | 114-03003 | FEED J | 1 |
| 37 | 110-96658 | SOLENOID MOUNTING BASE ASM. | 1 |
| 38 | 112-31503 | OIL PUMP SUPPORT | 1 |
| 39 | 229-62609 | REVERSE FEED BASE COLLAR | 1 |
| 40 | 229-62906 | PLUNGER ARM PIN | 1 |
| 41 | NS-6110420-SP | NUT 11/64-40 | 2 |
| 42 | 229-62708 | TUBE HOLDER, LOWER | 1 |
| 43 | 110-94109 | OIL TUBE | 1 |
| 44 | SD-0700711-TP | HINGE SCREW D=7 H=7.1 | 1 |
| 45 | 229-62500 | SOLENOID CONNECTING LINK,H | 1 |
| 46 | WP-0722316-SH | WASHER | 1 |
| 47 | 111-01508 | REVERSE FEED LINK | 1 |
| 48 | NS-6110420-SP | NUT 11/64-40 | 1 |
| 49 | SD-0700451-TP | HINGE SCREW D=7 H=4.5 | 1 |
| 50 | 114-03805 | THREAD GUIDE C FITTING PLATE | 1 |
| 51 | 229-70552 | FEED ECCENTRIC CAM ASM. | 1 |
| 52 | 229-70503 | FEED ECCENTRIC CAM L | (1) |
| 53 | 229-72806 | FEED ECCENTRIC CAM SETSCREW | (2) |
| 54 | NS-6090310-SP | NUT 9/64-40 | 1 |
| 55 | 113-05513 | ARM THREAD GUIDE, C | 1 |
| 56 | 110-94604 | CLUTCH LINK | 1 |
| 57 | 110-96500 | THREAD TRIMMER SOLENOID | 1 |
| 58 | SD-0550701-TP | STEP-SCREW D=5.5 H=7 | 1 |
| 59 | 110-94901 | SOLENOID BASE | 1 |
| 60 | 229-63458 | THREAD TENSION ASM. | 1 |
| 61 | 229-63409 | THREAD TENSION SPRING | (1) |
| 62 | 229-62054 | THREAD TENSION ASM. | 1 |
| 63 | 229-62005 | THREAD TENSION SPRING | (1) |
| 64 | 229-70701 | HORIZONTAL FEED ROD | 1 |
| 65 | 229-71204 | FEED REGULATOR BASE PIN | 1 |
| 66 | 229-71303 | FEED REGULATOR BASE | 1 |
| 67 | 113-02619 | SPRING | 1 |
| 68 | 229-71550 | FEED LEVER ARM ASM. | 1 |
| 69 | SS-7121410-TP | SCREW 3/16-28 L=14 | (1) |
| 70 | 229-71909 | FEED LEVER SPRING | 1 |
| 71 | 229-72251 | VERTICAL FEED ARM ASM. | 1 |
| 72 | SS-6121610-SP | SCREW 3/16-28 L=15.5 | (1) |
| 73 | 400-31240 | FEED ADJUST LINK ASM. | 1 |
| 74 | 400-31244 | FEED ADJUST ROD | 1 |
| 75 | 400-31249 | HINGE SCREW | 1 |
| 76 | 229-70859 | HORIZONTAL FEED ARM ASM. | 1 |
| 77 | SS-6121610-SP | SCREW 3/16-28 L=15.5 | (1) |
| 110-95503 | KNIFE THREAD GUIDE | (1) | |
| MDP-50082100 | NEEDLE DPX5 #21 | ||
| 400-31245 | FEED DIAL |
Page 28 — 15. EXCLUSIVE PARTS FOR DDL-8700A-7
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-11503 | THREAD TENSION ASM. | 1 |
| 2 | D3128-555-D00 | TAKE-UP SPRING | (1) |
| 3 | D3129-555-D00 | THREAD TENSION SPRING | (1) |
| 4 | M6018-350-AAA | RESISTANCE PACK AA ASM. | 1 |
| 5 | D1524-555-DBA | PRESSER FOOT ASM. | 1 |
| 6 | 229-64001 | BOBBIN (A) | 1 |
| 7 | B1837-012-0A0 | BOBBIN CASE ASM. | 1 |
| 8 | B1505-227-T00-A | PRESSER SPRING T | 1 |
| 9 | MC-2005006-50 | NEEDLE 134 NM65 | 1 |
| 10 | MDA-100B0900 | NEEDLE DAX1 #9 | 1 |
| 11 | 110-92558 | HAND LIFTER CAM ASM. | 1 |
Page 29 — 16. LIST FOR INFORMATION OF CHANGE
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 24 | ALL PARTS-全部 | ALL PARTS-全部 | |
| 31 | 110-01500 | ||
| 58 | 229-01904 | ||
| 63 | M6008-350-AAC | ||
| 65 | WS-0510002-KP | ||
| 19 | SS-6090650-SP | ||
| 39 | 229-16605 | ||
| 7 | 110-06509 | ||
| 29 | 110-18108 | ||
| 59 | B1636-581-C00 | ||
| 68 | 229-12703 | ||
| 3 | SL-4030621-SS | ||
| 57 | 110-09800 | ||
| 6 | B9117-552-A00 | ||
| 31 | 229-21001 | ||
| 58 | 114-15205 | ||
| 19 | SS-4090615-SP | ||
| 39 | 110-15906 | ||
| 7 | 229-08701 | ||
| 29 | 229-20102 | ||
| 69 | 229-14105 | ||
| 66 | 229-12752 | ||
| 71 | 110-09800 | ||
| 3 | SL-4030631-SC | ||
| 7 | 229-32156 | ||
| 13 | 229-32453 | ||
| 26 | B8228-125-000 | ||
| 6 | 229-64001 |
Page 32 — NUMERICAL INDEX OF PARTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 6 | 229-56106 | ||
| 10 | 229-56205 | ||
| 11 | 229-56304 | ||
| 7 | 229-56403 | ||
| 26 | 229-56809 | ||
| 9 | 229-56908 | ||
| 16 | 229-57104 | ||
| 21 | 229-57203 | ||
| 7 | 229-58300 | ||
| 63 | 229-62005 | ||
| 63 | 229-62005 | ||
| 62 | 229-62054 | ||
| 62 | 229-62054 | ||
| 51 | 229-62203 | ||
| 45 | 229-62351 | ||
| 45 | 229-62500 | ||
| 45 | 229-62500 | ||
| 39 | 229-62609 | ||
| 39 | 229-62609 | ||
| 42 | 229-62708 | ||
| 42 | 229-62708 | ||
| 30 | 229-62807 | ||
| 30 | 229-62807 | ||
| 40 | 229-62906 | ||
| 40 | 229-62906 | ||
| 61 | 229-63409 | ||
| 61 | 229-63409 | ||
| 60 | 229-63458 | ||
| 60 | 229-63458 | ||
| 25 | 229-70206 | ||
| 25 | 229-70206 | ||
| 23 | 229-70313 | ||
| 23 | 229-70313 | ||
| 22 | 229-70404 | ||
| 52 | 229-70503 | ||
| 51 | 229-70552 | ||
| 35 | 229-70602 | ||
| 64 | 229-70701 | ||
| 76 | 229-70859 | ||
| 65 | 229-71204 | ||
| 66 | 229-71303 | ||
| 68 | 229-71550 | ||
| 70 | 229-71909 | ||
| 71 | 229-72251 | ||
| 53 | 229-72806 | ||
| 67 | 229-90352 | ||
| 69 | 229-90550 | ||
| 68 | 229-90659 | ||
| 13 | 400-10395 | ||
| 13 | 400-10395 | ||
| 1 | 400-11503 | ||
| 46 | 400-12444 | ||
| 24 | 400-12444 | ||
| 5 | 400-14007 | ||
| 31 | 400-17623 | ||
| 39 | 400-17624 | ||
| 38 | 400-17625 | ||
| 73 | 400-31240 | ||
| 74 | 400-31244 | ||
| 33 | 400-31248 | ||
| 75 | 400-31249 | ||
| 26 | 400-35058 |
Juki DDL-8700 (36 pages) — parts catalog
- Page 1 (cover): This is the cover page for the JUKI DDL-8700-7 Series Parts List, which is a high-speed, 1-needle, lockstitch industrial sewing machine with an automatic thread trimmer.
- Page 2 (text): This page provides instructions on how to use the parts list, explaining codes, symbols, and notations used in the catalog, including explanations for asterisk marks, '01' codes, quantity notations, and dotted lines in figures. It also includes Japanese text with similar explanations.
- Page 3 (toc): This page contains the table of contents for the parts catalog, listing sections from "MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS" to "NUMERICAL INDEX OF PARTS" with corresponding page numbers.
- Page 4 (diagram): This page displays a diagram of machine frame and miscellaneous cover components, with numbered parts for identification.
- Page 5 (parts_list): This page lists parts for an industrial sewing machine, including part numbers, descriptions, quantities, and notes.
- Page 6 (diagram): This page displays a diagram of main shaft and thread-up lever components, with numbered parts for identification.
- Page 7 (parts_list): This page lists parts for an industrial sewing machine, including part numbers, descriptions, quantities, and notes. It covers a range of components from screws and bearings to complete assemblies like hand wheels and magnet fittings.
- Page 8 (diagram): This page displays a diagram of needle bar, upright shaft, and hook driving shaft components, with numbered parts and their corresponding references.
- Page 9 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, quantities, and notes. It details components like needle bars, gears, screws, and shafts.
- Page 10 (diagram): This page displays a diagram of hand lifter components, including various screws, levers, springs, and brackets, with reference numbers for each part.
- Page 11 (parts_list): This page lists parts for the DDL-8700-7-00 machine, including screws, rings, shafts, and various assembly components, with their corresponding part numbers and descriptions.
- Page 12 (diagram): This page displays a diagram of the feed mechanism components, with numbered parts and their corresponding references.
- Page 13 (parts_list): This page lists parts for the sewing machine, including part numbers, descriptions, quantities, and notes.
- Page 14 (diagram): This page displays a diagram of thread trimmer components, with numbered parts and their corresponding references.
- Page 15 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, quantities, and reference numbers. It details components like knife units, screws, bases, arms, springs, and solenoids.
- Page 16 (diagram): This page displays a diagram of automatic reverse feed components and a corresponding parts list with part numbers, descriptions, and quantities.
- Page 17 (parts_list): This page lists wiper components with part numbers, descriptions, and quantities.
- Page 18 (diagram): This page displays a diagram of oil lubrication components for an industrial sewing machine, with numbered parts indicated.
- Page 19 (parts_list): This page lists parts for DDL-8700-7-OB,-WB and DDL-8700-7-00, including part numbers, descriptions, and quantities.
- Page 20 (diagram): This page displays a diagram of oil reservoir components, with numbered parts and their corresponding references.
- Page 21 (parts_list): This page lists parts for the sewing machine, including oil reservoir assemblies, rubber rings, screws, and knee lifter components, with their corresponding part numbers and quantities.
- Page 22 (parts_list): This page lists belt cover and bobbin components, including part numbers, descriptions, and quantities.
- Page 23 (parts_list): This page lists components for thread stand assembly, including part numbers, descriptions, and quantities.
- Page 24 (diagram): This page displays a diagram of exclusive parts for the DDL-8700H-7 sewing machine, with various components labeled with reference numbers.
- Page 25 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, quantities, and notes. It covers items from reference number 1 to 63, with specific notes for items 37 and 63.
- Page 26 (diagram): This page displays a diagram of exclusive parts for the DDL-8700J-7 sewing machine, with numbered components and their corresponding part numbers and descriptions.
- Page 27 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, quantities, and reference numbers. It contains 77 part entries.
- Page 28 (parts_list): This page lists exclusive parts for the DDL-8700A-7 sewing machine, including thread tension assemblies, take-up springs, presser foot assemblies, needle sets, and hand lifter cam assemblies.
- Page 29 (parts_list): This page lists parts with their corresponding revision numbers, page references, and part numbers. It includes both added and obsolete parts, with a note indicating that obsolete parts can still be ordered if they are not interchangeable with new parts.
- Page 32 (index): This page contains a numerical index of parts for an industrial sewing machine, listing part numbers, page references, and reference numbers.
- Page 34 (text): This page contains the heading "MEMO" and ruled lines for notes, with a page number "- 31 -" and website "jintex.in" at the bottom.
- Page 35 (unknown): This page contains a watermark and a website address at the bottom.
- Page 36 (cover): This is the cover page of a JUKI CORPORATION parts list, dated December 2005, and printed in Japan.