Juki DLM-5210N Parts Book (PDF)
Text index — Juki DLM-5210N
Page 1 — 1. MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 113-36559 | FACE PLATE ASM. | 1 |
| 2 | 110-00304 | FACE PLATE GASKET | 1 |
| 3 | 113-30602 | FACE PLATE COVER | 1 |
| 4 | SS-1110540-SP | SCREW 11/64-40 L=8 | 3 |
| 5 | SS-6080410-SP | SCREW 1/8-44 L=4 | 1 |
Page 2 — 2. MAIN SHAFT & THREAD TAKE-UP LEVER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | SS-8151150-SP | SCREW 15/64-28 L=10.5 | 1 |
| 2 | 110-17357 | THREAD TAKE-UP CRANK SHAFT ASM | 1 |
| 3 | B1909-505-000 | RUBBER | 1 |
| 4 | 110-39070 | THREAD TAKE-UP LEVER ASM. | 1 |
| 5 | 110-39062 | THREAD TAKE-UP LEVER ASM. | (1) |
| 6 | B1905-547-S00 | NEEDLE BEARING | (2) |
| 7 | 110-05204 | NEEDLE BAR CRANK | (1) |
| 8 | B1498-552-000 | NEEDLE BAR CRANK ROD | (1) |
| 9 | B1903-552-000 | LEFT SCREW | (1) |
| 10 | 113-31170 | COUNTERWEIGHT ASM. LM | 1 |
| 11 | 113-49214 | COUNTERWEIGHT | (1) |
| 12 | SS-8681650-TP | SCREW 9/32-28 L=16 | (1) |
| 13 | SS-8680610-TP | SCREW 1/4-40 L=6 | (2) |
| 14 | RO-0442401-00 | RUBBER RING | (1) |
| 15 | SS-7681650-TP | SCREW 9/32-28 L=16 | (1) |
| 16 | 113-49107 | BUSHING, FRONT | 1 |
| 17 | 113-49404 | BALANCER | 1 |
| 18 | SS-7150940-SP | SCREW 15/64-28 L=9 | 2 |
| 19 | B1215-552-000 | OIL ADJUSTING COLLAR | 1 |
| 20 | 110-02300 | BUSHING, INTERMEDIATE | 1 |
| 21 | CS-147121A-SH | THRUST COLLAR ASM. D=14.72 H=12 | 1 |
| 22 | SS-8660610-TP | SCREW 1/4-40 L=6 | (2) |
| 23 | 229-10063 | FEED DRIVE ECCENTRIC CAM ASM. | 1 |
| 24 | SS-6661110-SP | SCREW 1/4-40 L=11 | (2) |
| 25 | 229-10004 | FEED DRIVE ECCENTRIC CAM | (1) |
| 26 | 229-10103 | THRUST COLLAR | 1 |
| 27 | SS-8090650-SP | SCREW 9/64-40 L=6 | 2 |
| 28 | RC-1850001-KP | SNAP RING 18.5 | 1 |
| 29 | 110-02409 | MAIN SHAFT BUSHING, REAR | 1 |
| 30 | 110-02508 | OIL SEAL | 1 |
| 31 | 113-49008 | MAIN SHAFT | 1 |
| 32 | 110-71254 | FLYWHEEL ASM. | 1 |
| 33 | SS-8151550-SP | SCREW 15/64-28 L=15 | (2) |
| 34 | 110-03001 | OIL AMOUNT ADJUSTING PIN | 1 |
| 35 | RO-0291801-00 | RUBBER RING | 1 |
| 36 | 110-02904 | ROLLER FELT | 1 |
Page 3 — 3. NEEDLE BAR, UPRIGHT SHAFT & HOOK DRIVING SHAFT COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | B1405-012-000 | CAP | 1 |
| 2 | B1402-552-000-A | NEEDLE BAR BUSHING, UPPER | 1 |
| 3 | B1401-522-A00-A | NEEDLE BAR (A) | 1 |
| 4 | B1414-555-000 | SLIDE BLOCK | 1 |
| 5 | B1411-552-0A0 | NEEDLE BAR CONNECTING ASM. | 1 |
| 6 | SS-6090670-TP | SCREW 9/64-40 L=6 | (1) |
| 7 | B1403-155-000 | NEEDLE BAR BUSHING, LOWER | 1 |
| 8 | SS-7080510-TP | SCREW 1/8-44 L=4.5 | 1 |
| 9 | 113-31204 | NEEDLE BAR THREAD GUIDE | 1 |
| 10 | MDR-100B1400 | NEEDLE DBX1 #14 | 1 |
| 11 | B1306-155-0C0 | GEAR & PINION ASM. | 1 |
| 12 | B1306-155-0B0 | GEAR & PINION ASM., UPPER | (1) |
| 13 | B1305-012-0A0 | GEAR ASM. | (1) |
| 14 | SS-6660810-TP | SCREW 1/4-40 L=8 | (2) |
| 15 | B1306-155-0A0 | PINION ASM. | (1) |
| 16 | SS-6660810-TP | SCREW 1/4-40 L=8 | (2) |
| 17 | B1307-155-0B0 | GEAR & PINION ASM., LOWER | (1) |
| 18 | B1307-155-0A0 | GEAR ASM. LARGE | (1) |
| 19 | SS-8660810-TP | SCREW 1/4-40 L=8 | (2) |
| 20 | B1308-155-0A0 | PINION ASM. | (1) |
| 21 | SS-8660810-TP | SCREW 1/4-40 L=8 | (2) |
| 22 | 229-05004 | UPRIGHT SHAFT | 1 |
| 23 | 113-31303 | NEEDLE BAR THREAD GUIDE | 1 |
| 24 | 229-05103 | UPRIGHT SHAFT BUSHING, UPPER | 1 |
| 25 | 110-04207 | UPRIGHT SHAFT BUSHING, LOWER | 1 |
| 26 | 110-15807 | BUSHING, REAR | 1 |
| 27 | MC-2005009-00 | NEEDLE 134 90 | 1 |
| 28 | CS-079101A-SH | THRUST COLLAR ASM. D=7.94 W=10 | 1 |
| 29 | SS-6110420-TP | SCREW 11/64-40 L=4.5 | (2) |
| 30 | 229-16001 | HOOK DRIVING SHAFT | 1 |
| 31 | 229-16407 | BOBBIN CASE POSITIONING FINGER | 1 |
| 32 | SS-4110915-TP | SCREW 11/64-40 L=9 | 1 |
| 33 | 110-15955 | OIL SEAL SCREW ASM. | 1 |
| 34 | 110-15906 | OIL WICK | (1) |
| 35 | B1808-552-000 | OIL SEAL SCREW | (1) |
| 36 | BS117-012-000 | BOBBIN | 1 |
| 37 | B1837-012-0A0 | BOBBIN CASE ASM. | 1 |
| 38 | CS-079073A-SH | THRUST COLLAR ASM. | 1 |
| 39 | SS-8110410-TP | SCREW 11/64-40 L=3.5 | (2) |
| 40 | 229-16100 | HOOK DRIVING SHAFT BUSH, FRONT | 1 |
| 41 | MDP-500B1400 | NEEDLE DPX5 #14 | 1 |
| 42 | B1401-522-B00-A | NEEDLE BAR(B) | 1 |
| 43 | B1835-523-000 | POSITIONING FINGER | 1 |
| 44 | B1830-127-0A0 | HOOK ASM. | 1 |
| 45 | SS-4120915-SP | SCREW 3/16-28 L=9 | 1 |
Page 4 — 4. HAND LIFTER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 110-71800 | HAND LIFTER | 1 |
| 2 | B1521-555-000 | SCREW | 1 |
| 3 | RO-0371801-00 | RUBBER RING | 1 |
| 4 | 110-92558 | HAND LIFTER CAM ASM. | 1 |
| 5 | 110-06350 | HAND LIFTER LINK | 1 |
| 6 | RE-0500000-K0 | E-RING | 1 |
| 7 | 110-06509 | LINK SHAFT | 2 |
| 8 | B1421-523-000 | FINGER PROTECTOR | 1 |
| 9 | RE-0500000-K0 | E-RING | 3 |
| 10 | 110-06202 | LIFTING LEVER | 1 |
| 11 | 110-07309 | E-RING | 1 |
| 12 | 110-07101 | HINGE SCREW | 1 |
| 13 | 110-06905 | LIFTING LEVER CONNECTING ROD | 1 |
| 14 | 229-09006 | KNEE LIFTER CONNECTING ROD | 1 |
| 15 | 229-08800 | KNEE LIFTER LINK | 1 |
| 16 | SD-0720331-SP | HINGE SCREW D= 7.24 H= 3.3 | 1 |
| 17 | RE-0500000-K0 | E-RING | 2 |
| 18 | 110-18207 | TENSION RELEASE RETURN SPRING | 1 |
| 19 | 110-18405 | TENSION RELEASE PIN SPRING | 1 |
| 20 | C2-2020000-00 | OIL WICK | 0.14 |
| 21 | 110-18305 | TENSION RELEASE SUPPORTING PIN | 1 |
| 22 | 110-18009 | TENSION RELEASE PLATE | 1 |
| 23 | 110-18108 | TENSION RELEASE SHAFT | 1 |
| 24 | 110-71502 | PRESSER SPRING REGULATOR | 1 |
| 25 | 110-71701 | NUT | 1 |
| 26 | 229-07703 | PRESSER GUIDE BAR | 1 |
| 27 | 229-07406 | PRESSER SPRING | 1 |
| 28 | 110-05004 | PRESSER BAR GUIDE BRACKET | 1 |
| 29 | B1501-622-000 | PRESSER BAR | 1 |
| 30 | 110-06103 | PRESSER BAR THREAD GUIDE | 1 |
| 31 | SS-8860810-1P | SCREW 1/4-40 L=8 | 1 |
| 32 | SS-6090910-SP | SCREW 9/64-40 L=9 | 2 |
| 33 | B1502-541-000 | PRESSER BAR BUSHING, LOWER | 1 |
| 34 | SS-7091110-SP | SCREW 9/64-40 L=10.5 | 1 |
| 35 | B1524-522-NB0-A | PRESSER FOOT ASM. | 1 |
| 36 | B1524-523-0A0 | PRESSER FOOT ASM. | 1 |
| 37 | WP-0460556-SD | WASHER 4.6X7.5X0.5 | (1) |
| 38 | SD-0450461-SP | HINGE SCREW D= 4.5 H= 4 | (1) |
| 39 | B1524-523-00E | SPRING | (1) |
Page 5 — 5. FEED MECHANISM COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 110-09503 | FEED REGULATOR CONNECTING ROD | 1 |
| 2 | 110-09602 | FEED REGULATOR PIN | 1 |
| 3 | SS-6090670-TP | SCREW 9/64-40 L=6 | 2 |
| 4 | 110-08701 | FEED REGULATOR | 1 |
| 5 | 229-11705 | FEED REGULATOR BUSHING | 1 |
| 6 | SS-7120710-SZ | SCREW 3/16-28 L=7 | 1 |
| 7 | 110-09909 | FEED REGULATOR SCREW | 1 |
| 8 | 229-12109 | FEED REGULATOR PIN SPRING | 1 |
| 9 | 110-52701 | PIN | 1 |
| 10 | 110-71909 | FEED DIAL | 1 |
| 11 | SS-6121880-SP | SCREW 3/16-28 L=18 | 1 |
| 12 | 110-08208 | ROCKER SHAFT CONNECTING ROD | 1 |
| 13 | 229-11101 | WALKING FOOT PIN C | 1 |
| 14 | SS-6090620-SP | SCREW 9/64-40 L=6 | 1 |
| 15 | 110-14008 | CONNECTING ROD | 1 |
| 16 | RO-0922702-00 | RUBBER RING | 1 |
| 17 | 110-10303 | FEED REVERSE SPRING | 1 |
| 18 | RE-0500000-KO | E-RING | 1 |
| 19 | 110-10154 | FEED REVERSE ARM ASM. | 1 |
| 20 | 110-10410 | FEED REVERSE ARM SCREW | 1 |
| 21 | RE-0500000-KO | E-RING | 1 |
| 22 | 110-09404 | ADJUSTING LINK SPRING | 1 |
| 23 | 229-10905 | WALKING FOOT PIN A | 2 |
| 24 | 110-08703 | WALKING FOOT LINK | 2 |
| 25 | 110-08604 | CONNECTING LINK A | 2 |
| 26 | 110-08405 | WALKING FOOT ADJUSTING LINK | 1 |
| 27 | 110-08802 | ADJUSTING LINK FULCRUM SHAFT A | 2 |
| 28 | SS-8150710-SP | SCREW 15/64-28 L=7 | 2 |
| 29 | SS-6090520-SP | SCREW 9/64-40 L=6 | 2 |
| 30 | 229-40803 | FEED BAR SHAFT | 1 |
| 31 | NO-0150001-KP | RETAINING RING 13.5 | 1 |
| 32 | B1613-522-N00-A | FEED DOG | 1 |
| 33 | SS-4080620-TP | SCREW 1/8-44 L=6 | 2 |
| 34 | 229-71857 | FEED BASE ASM. | 1 |
| 35 | 110-92301 | ADJUSTING LINK SPRING GUIDE | 1 |
| 36 | SS-4110510-SP | SCREW 11/64-40 L=5 | 2 |
| 37 | 229-13701 | FEED SPRING HOOK | 1 |
| 38 | 229-12901 | FEED ROCKER SHAFT | 1 |
| 39 | 229-11002 | WALKING FOOT PIN B | 1 |
| 40 | SS-6090620-SP | SCREW 9/64-40 L=6 | 1 |
| 41 | NS-6680410-SP | NUT 9/32-28 | 1 |
| 42 | 228-10350 | FEED ROCKER SHAFT CRANK ASM. | 1 |
| 43 | SS-6121610-SP | SCREW 3/16-28 L=15.5 | 1 |
| 44 | 229-15151 | FEED ARM COMPL. | 1 |
| 45 | SS-7121610-SP | SCREW 3/16-28 L=15.5 | 1 |
| 46 | SD-1000801-SH | HINGE SCREW D=10 H=8 | 1 |
| 47 | 229-15201 | FEED DRIVING SHAFT | 1 |
| 48 | CS-147121A-SH | THRUST COLLAR ASM. D=14.72 W=12 | 1 |
| 49 | SS-3680610-TP | SCREW 1/4-40 L=6 | 2 |
| 50 | 110-10907 | FEED ROCKER SHAFT BUSHING | 1 |
| 51 | 110-72006 | FEED DIAL | 1 |
Page 6 — 6. KNIFE COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 113-32400 | KNIFE POSITIONING PLATE | 1 |
| 2 | B4131-522-000 | FELT | 1 |
| 3 | SS-4090815-SP | SCREW 9/64-40 L=8 | 1 |
| 4 | B4133-522-000 | TENSION SPRING | 1 |
| 5 | NS-6090310-SP | NUT 9/64-40 | 1 |
| 6 | SS-4090815-SP | SCREW 9/64-40 L=8 | 1 |
| 7 | NS-6090310-SP | NUT 9/64-40 | 1 |
| 8 | NS-6120310-SP | NUT 3/16-28 | 1 |
| 9 | B4119-522-000 | TENSION SPRING | 1 |
| 10 | SS-6121010-SP | SCREW 3/16-28 L=10 | 1 |
| 11 | SS-6111010-SP | SCREW 11/64-40 L=9.5 | 1 |
| 12 | NS-6110420-SP | NUT 11/64-40 | 1 |
| 13 | SS-4080610-SP | SCREW 1/8-44 L=6.4 | 2 |
| 14 | B4122-522-000 | WASHER | 1 |
| 15 | B4121-522-000 | KNIFE | 1 |
| 16 | B4120-522-000 | KNIFE HOLDER | 1 |
| 17 | SS-6110810-TP | SCREW 11/64-40 L=8 | 1 |
| 18 | B4113-522-000-A | KNIFE DRIVING BLOCK | 1 |
| 19 | B4135-523-000 | CUTTING CLOTH SEPARATER | 1 |
| 20 | SS-5060410-SP | SCREW 3/32-56 L=3.5 | 2 |
| 21 | B4114-522-000 | KNIFE DRIVING BLOCK STUD | 1 |
| 22 | B4115-522-000 | GUIDE STUD FOR KNIFE DRIVING B | 1 |
| 23 | WP-0480856-SP | WASHER 4.8X8.4X0.8 | 2 |
| 24 | B4103-522-0A0 | CLUTCH RETAI ASM. | 1 |
| 25 | B4111-522-000-A | KNIFE DRIVING ROD CLUTCH PIN | (1) |
| 26 | B4125-522-000 | SPRING | (1) |
| 27 | RE-0200000-K0 | E-RING | (2) |
| 28 | B4124-522-000 | KNIFE RELEASE LEVER | (1) |
| 29 | B4126-522-000-A | KNIFE RELEASE LEVER PIN | (1) |
| 30 | B4103-522-000-A | KNIFE DRIVING ROD CLUTCH RETAI | (1) |
| 31 | B4108-522-000-A | KNIFE DRIVING ROD CLUTCH KNOB | (1) |
| 32 | B4110-522-000 | SPRING | (1) |
| 33 | B4121-523-000 | KNIFE | 1 |
| 34 | 113-32202 | KNIFE DRIVING STUD CONNECTION | 1 |
| 35 | 113-32301 | KNIFE DRIVING ROD | 1 |
| 36 | B4123-522-000 | KNIFE NEEDLE BEARING | 1 |
| 37 | B4106-522-000-B | KNIFE CAM | 1 |
| 38 | B4132-522-000-A | THRUST PLATE | 1 |
| 39 | B4107-522-000 | PIN | 1 |
| 40 | B4108-522-000 | SLIDE BLOCK GUIDE | 1 |
| 41 | SS-6121060-SP | SCREW 3/16-28 L=9.5 | 2 |
| 42 | B1414-555-000 | SLIDE BLOCK | 1 |
| 43 | B4116-530-000 | BUSHING | 1 |
| 44 | SS-9120910-TP | SCREW 3/16-28 L=9 | 2 |
| 45 | B4102-522-000 | KNIFE DRIVING STUD | 1 |
| 46 | SS-6090810-TP | SCREW 9/64-40 L=7.5 | 1 |
Page 7 — 7. OIL LUBRICATION COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | B3530-555-000 | OIL SIGHT WINDOW | 1 |
| 2 | RO-1952401-00 | RUBBER RING | 1 |
| 3 | 110-21201 | MAIN SHAFT OIL TUBE | 1 |
| 4 | SS-4150915-SP | SCREW 15/64-28 L=9 | 1 |
| 5 | 110-21409 | RUBBER JOINT | 1 |
| 6 | SS-4120615-SP | SCREW 3/16-28 L=6 | 1 |
| 7 | 229-25101 | OIL FELT PRESSER | 1 |
| 8 | 113-31758 | OIL RETURN TUBE ASM. | 1 |
| 9 | B3536-122-000 | HOLDER | (1) |
| 10 | CQ-2520000-00 | OIL WICK | 0.3 |
| 11 | 229-24500 | HOOK OIL TUBE | 1 |
| 12 | 229-24807 | PIPE HOLDER, LOWER | 1 |
| 13 | SS-4150915-SP | SCREW 15/64-28 L=9 | 1 |
| 14 | 229-24906 | OIL REGULATOR SCREW SPRING | 1 |
| 15 | B3514-412-000 | OIL ADJUSTING SCREW | 1 |
| 16 | 110-20054 | LUBRICATING OIL PUMP ASM. | 1 |
| 17 | 110-20302 | OIL PUMP INSTALLING BASE | (1) |
| 18 | SL-4030851-SF | SCREW M3 L=8 | (3) |
| 19 | 110-20005 | OIL PUMP | (1) |
| 20 | 110-20708 | OIL PUMP IMPELLER | (1) |
| 21 | SE-4301041-SR | SCREW D=3 L=10 | (3) |
| 22 | 110-20203 | LUBRICATING OIL PUMP COVER | (1) |
| 23 | 110-20807 | OIL PUMP IMPELLER COVER | (1) |
| 24 | 110-20401 | PLUNGER | (1) |
| 25 | 110-20609 | PLUNGER SPRING | (1) |
| 26 | 110-20500 | PLUNGER SCREW | (1) |
| 27 | 110-20906 | HOOK DRIVING SHAFT OIL TUBE | (1) |
| 28 | 113-92107 | OIL PUMP SUPPORT | 1 |
| 29 | SS-6111010-TP | SCREW 11/64-40 L= 9.5 | 1 |
Page 8 — 8. OIL RESERVOIR COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 113-60757 | OIL RESERVOIR ASM. | 1 |
| 2 | 113-60708 | OIL RESERVOIR | (1) |
| 3 | 110-23108 | GASKET | (1) |
| 4 | 110-47107 | RUBBER CUSHION | (4) |
| 5 | SS-6700710-SH | SCREW 5/16-24 L=7 | (1) |
| 6 | RO-0982401-00 | RUBBER RING | (1) |
| 7 | 229-32156 | KNEE LIFTER ROTATION ARM ASM. | (1) |
| 8 | 229-32107 | KNEE LIFTER ROTATION ARM | (1) |
| 9 | NM-6060001-SE | NUT M6 | (2) |
| 10 | SM-8063012-TR | SCREW M6 L=30 | (2) |
| 11 | 229-32206 | SPRING | (1) |
| 12 | RE-1000000-K0 | E-RING 10 | (1) |
| 13 | 229-32453 | BRACKET ASM. | (1) |
| 14 | 229-32404 | BRACKET | (1) |
| 15 | 229-34707 | BRECKET SCREW | (2) |
| 16 | SM-9061853-SR | SCREW M6 L=17.6 | (1) |
| 17 | 229-32305 | KNEE PRESS CROSS SHAFT | (1) |
| 18 | 110-23751 | KNEE PRESS PLATE ASM. | 1 |
| 19 | B3431-552-000-A | KNEE PRESS PLATE COVER | (1) |
| 20 | B3419-122-000 | KNEE LIFTER PLATE ROD | (1) |
| 21 | 110-24403 | RUBBER | (1) |
| 22 | 110-23702 | KNEE PRESS PLATE | (1) |
| 23 | 110-23801 | KNEE PRESS PLATE HOLDER | (1) |
| 24 | SM-8061203-SE | SCREW M6 L=12 | (1) |
| 25 | SS-4110715-SP | SCREW 11/64-40 L=7 | 2 |
| 26 | B8226-522-000 | WASTE MATERIAL CHUTE HOLDER | 1 |
| 27 | SK-3412000-SC | WOOD SCREW D=4.1 L=20 | 3 |
| 28 | SS-7090610-SP | SCREW 9/64-40 L=6 | 4 |
| 29 | NS-6090310-SP | NUT 9/64-40 | 8 |
| 30 | B8224-523-000 | WASTE MATERIAL CHUTE(LARGE) | 1 |
| 31 | B8225-522-000 | WASTE MATERIAL CHUTE, SMALL | 1 |
| 32 | 113-41708 | HOOK OIL COVER | 1 |
| 33 | SS-4110715-SP | SCREW 11/64-40 L=7 | 2 |
| 34 | 113-41607 | WASTE MATERIAL CHUTE | 1 |
| 35 | SS-4110515-SP | SCREW 11/64-40 L=5 | 2 |
| 36 | 113-41559 | OIL RESERVOIR ASM. | 1 |
| 37 | 113-41500 | OIL RESERVOIR | (1) |
| 38 | SS-7091110-SP | SCREW 9/64-40 L=10.5 | 4 |
| 39 | 110-24304 | KNEE PRESS LIFTER ROD | 1 |
| 40 | 113-61003 | OIL PUSH GUIDE | 1 |
Page 9 — 9. BELT COVER & BOBBIN WINDER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 110-76650 | BELT COVER ASM. (URBANE GREY) | |
| 2 | 110-76601 | BELT COVER A | |
| 3 | 110-76700 | BELT COVER A CAP | |
| 4 | 110-76858 | BELT COVER B ASM. | |
| 5 | 110-76809 | BELT COVER B | |
| 6 | 110-76957 | BELT COVER B CAP ASM. | |
| 7 | 110-23504 | BELT COVER SUPPORT, A | |
| 8 | 110-25202 | BELT COVER A SCREW | |
| 9 | SS-4121415-SP | SCREW 3/16-28 L=14 | |
| 10 | WP-0501016-SD | WASHER 5X10,5X1 | |
| 11 | SK-3412000-SC | WOOD SCREW D=4.1 L=20 | |
| 12 | WP-0450826-SC | WASHER 4.5X10X0.8 | |
| 13 | 229-27354 | BOBBIN WINDER COMPL. | |
| 14 | 229-28501 | THREAD TENSION POST BASE | |
| 15 | SS-4110515-SP | SCREW 11/64-40 L=5 | |
| 16 | 229-28907 | THREAD TENSION DISK | |
| 17 | 229-29004 | THREAD TENSION SPRING | |
| 18 | 229-28808 | NUT | |
| 19 | SS-7110350-SP | SCREW 11/64-40 L=3.5 | |
| 20 | 229-28402 | CONTROL RUBBER HOLDING PLATE | |
| 21 | 229-28303 | CONTROL RUBBER | |
| 22 | 229-28105 | BOBBIN PRESSER | |
| 23 | SD-0490261-SP | HINGE SCREW D=4.9 H=2.6 | |
| 24 | SS-7081310-SP | SCREW 1/8-44 L=12.5 | |
| 25 | 229-27602 | BOBBIN WINDER SPINDLE | |
| 26 | SS-8110510-SP | SCREW 11/64-40 L=5 | |
| 27 | 229-28709 | THREAD TENSION POST | |
| 28 | 229-27305 | BOBBIN WINDER BASE | |
| 29 | 229-27404 | BOBBIN WINDER | |
| 30 | WP-0450826-SC | WASHER 4.5X10X0.8 | |
| 31 | SK-3412000-SC | WOOD SCREW D=4.1 L=20 |
Page 10 — 11. FOLDER COMPONENTS (EXCLUSIVE PARTS FOR DLM-5210N)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | MAT-11801NAO | BINDER ASM. | |
| 2 | MAN-011010AO | SINGLE FOLD BIAS FOLDER ASM. | |
| 3 | MAT-11803NOA | TAPE GUIDE | |
| 4 | SS-7090510-SP | SCREW 9/64-40 L= 4.6 | |
| 5 | WP-0450000-SD | WASHER 4.5X8X0.5 | |
| 6 | SS-7090710-SP | SCREW 9/64-40 L= 6.8 | |
| 7 | WP-0371026-SD | WASHER 3.7X7X1 | |
| 8 | MAT-11901NAO | BINDER ASM. | |
| 9 | MAN-015010AO | DOUBLE FOLD BIAS FOLDER ASM. | |
| 10 | MAT-11903NOA | TAPE GUIDE B | |
| 11 | SS-7090510-SP | SCREW 9/64-40 L= 4.6 | |
| 12 | WP-0450000-SD | WASHER 4.5X8X0.5 | |
| 13 | SS-7090710-SP | SCREW 9/64-40 L= 6.8 | |
| 14 | WP-0371026-SD | WASHER 3.7X7X1 |
Juki DLM-5210N — parts catalog
- Page 1 (diagram): Exploded diagram and parts table for the machine frame and miscellaneous cover components of the Juki DLM-5200N/DLM-5210N high speed lockstitch sewing machine, listing reference numbers, part numbers, descriptions and quantities.
- Page 2 (diagram): Exploded diagram of main shaft and thread take-up lever components with a parts table listing reference numbers, part numbers, descriptions and quantities for items 1 to 36.
- Page 3 (diagram): Exploded diagram of needle bar, upright shaft and hook driving shaft components with a reference table listing part numbers, descriptions and quantities.
- Page 4 (diagram): Exploded diagram of hand lifter components with a parts table listing reference numbers, part numbers, descriptions and quantities for a Juki-style sewing machine.
- Page 5 (diagram): Exploded diagram of feed mechanism components with a reference parts table listing feed regulator, feed reverse arm, feed dog, feed rocker shaft and related screws and bushings.
- Page 6 (diagram): Exploded diagram of knife components with a numbered parts table listing reference numbers, part numbers, descriptions and quantities for the knife assembly of a sewing machine.
- Page 7 (diagram): Exploded diagram of oil lubrication components for a sewing machine with a parts table listing 29 reference items including oil sight window, oil tube, oil pump and its parts.
- Page 8 (diagram): Exploded diagram of oil reservoir components with a parts table listing reference numbers, part numbers, descriptions and quantities for items 1 to 40.
- Page 9 (diagram): Exploded diagram and parts table for belt cover and bobbin winder components, with a second thread stand components section below.
- Page 10 (diagram): Exploded diagrams of folder components (binder and double fold bias folder assemblies with screws and washers) for DLM-5210N, with a reference parts table beside them.