Juki MB-1373 / MB-1377 Parts Book (PDF)
Text index — Juki MB-1373 / MB-1377
Page 2
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 260-26856 | PICK-UP DEVICE ASM. | 1 |
| 2 | 400-41058 | BUTTON CLAMP LIFTING HOOK | (1) |
| 3 | SS-7150940-SP | SCREW 15/64-28 L=9 | (1) |
| 4 | SS-9621413-SP | SCREW 3/16-32 L=13.5 | (2) |
| 5 | WP-0501016-SD | WASHER 5X10.5X1 | (2) |
| 6 | 260-25502 | BUTTON CLAMP HOLDER | (1) |
| 7 | SS-7090410-SP | SCREW 9/64-40 L=3.5 | (1) |
| 8 | SD-0550301-SP | HINGE SCREW D=5.5 H=3 | (1) |
| 9 | 260-25403 | JAW LEVER HOLDER | (1) |
| 10 | SD-0550181-SP | HINGE SCREW D= 5.50 H= 1.8 | (1) |
| 11 | 260-25809 | CLAMP SCREW A | (1) |
| 12 | 260-26700 | SNAP FASTENER CLAMP STOP LEVER | (1) |
| 13 | 260-26005 | NUT | (1) |
| 14 | 260-25908 | BUTTON CLAMP SLIDE | (1) |
| 15 | 260-26609 | BUTTON CLAMP STOP PIN | (2) |
| 16 | 260-26104 | BUTTON CLAMP LEVER JAW (LEFT) | (1) |
| 17 | 260-26203 | BUTTON HOLDING SPRING, LEFT | (1) |
| 18 | SD-0640391-TP | HINGE SCREW D= 6.35 H= 3.9 | (1) |
| 19 | SS-7090410-SP | SCREW 9/64-40 L= 3.5 | (2) |
| 20 | 260-26708 | BUTTON CLAMP SPRING | (1) |
| 21 | 260-26302 | BUTTON CLAMP LEVER JAW RIGHT | (1) |
| 22 | 260-26401 | BUTTON HOLDING SPRING, RIGHT | (1) |
| 23 | SS-7150940-SP | SCREW 15/64-28 L=9 | (1) |
| 24 | 400-40938 | BUTTON_CLAMP_PRESSURE_ADJUSTIN | 1 |
| 25 | 260-27102 | PRESSURE ADJUSTING SPRING | 1 |
| 26 | NM-6060001-CP | NUT M6 | 1 |
| 27 | 260-27409 | FINGER GUARD | 2 |
| 28 | 400-41069 | SPRING_HOLDING_PLATE... | 1 |
| 29 | 260-25205 | HINGE PIN | 1 |
| 30 | B2541-372-000 | SNAP RING | 1 |
| 31 | NM-6060001-CP | NUT M6 | 1 |
| 32 | 400-40937 | PICK_UP_DEVICE_STOPPER_PIN | 1 |
| WP-0501016-SP | WASHER 5X10.5X1 | (2) | |
| 260-26006 | NUT (B) | (1) | |
| 260-25808 | BUTTON CLAMP SLIDE | (1) | |
| 260-26008 | BUTTON CLAMP STOP PIN | (1) | |
| 260-26003 | BUTTON HOLDING SPRING, RIGHT | (1) | |
| 260-26305 | SPRING HOLDING PLATE... | 1 |
Page 4 — 2. ARM & MISCELLANEOUS COVERS COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-38426 | FACE_PLATE_COMPL. | 1 |
| 2 | SH-4040855-SP | SCREW | 4 |
| 3 | 260-21600 | TENSION SPRING | 1 |
| 4 | 260-32003 | NIPPER RELEASING STUD | 1 |
| 5 | SH-6040650-TP | SCREW | 1 |
| 6 | 260-31203 | THREAD GUIDE NO.4 | 1 |
| 7 | 260-31351 | THREAD TENSION NO.3 ASM. | 1 |
| 8 | 260-31302 | TENSION ADJUSTING BASE NO.3 | (1) |
| 9 | 260-31401 | THREAD PRESSER PLATE | (1) |
| 10 | 260-31500 | TENSION SPRING B | (1) |
| 11 | 260-31609 | THREAD TENSION STUD | (1) |
| 12 | 260-31708 | THREAD TENSION NUT | (2) |
| 13 | RE-0320000-KO | E-RING 3.2 | 1 |
| 14 | SH-4040855-SP | SCREW | 8 |
| 15 | TA-2050406-RO | RUBBER PLUG | 1 |
| 16 | 400-40931 | SIDE_COVER_RIGHT | 1 |
| 17 | CM-3013000-01 | SAFETY LABEL | 1 |
| 18 | 400-40932 | SIDE_COVER_LEFT | 1 |
| 19 | SH-6083042-CH | SCREW M8 L=30 | 4 |
| 20 | 260-33704 | STOPPER | 1 |
| 21 | SH-6050800-SP | SCREW M5 L=8 | 2 |
| 22 | 260-11205 | GUIDE PIN | 2 |
| 23 | 400-38483 | SET_SCREW | 1 |
| 24 | 400-38431 | BED_OIL_SHIELD | 1 |
| 25 | SH-8060610-TP | SCREW | 1 |
| 26 | 400-41022 | BUTTON_TRAY_ASM. | 1 |
| 27 | 260-22608 | CAM INDICATING PIN A | 2 |
| 28 | 260-22707 | CAM INDICATING PIN B | 2 |
| 29 | WS-0650389-KP | SPRING WASHER 6.5X14.0X17 | 1 |
| 30 | 400-38425 | SIDE_COVER_LEFT | 1 |
| 31 | 400-38430 | LOOPER_COVER | 1 |
| 32 | 400-41067 | SIDE_COVER_SPRING | 2 |
| 33 | SH-6040600-SP | SCREW M4 L=6 | 2 |
| 34 | SH-4040855-SP | SCREW | 2 |
| 35 | 400-38173 | OIL_DRIP_FELT | 1 |
| 36 | SD-0600277-TP | SHOULDER SCREW D=6 H=2.7 | 1 |
| 37 | 400-38424 | SIDE_COVER_RIGHT | 1 |
| 38 | 400-40936 | SIDE_COVER_HINGE_SHAFT_RIGHT | 2 |
| 39 | 400-40835 | SIDE_COVER_HINGE_SHAFT_LEFT | 1 |
| 40 | SH-8060612-TP | SCREW M6 L=6 | 1 |
| 41 | 400-38446 | MACHINE_SUB_BASE | 1 |
| 42 | SH-8060612-TP | SCREW M6 L=6 | 1 |
| 43 | 400-38471 | SUSPENSION_SCREW_B | 1 |
| 44 | 400-54729 | ASSY SAFETY PLATE | 1 |
| 45 | 400-54730 | SAFETY PLATE INSTALLING BASE | (1) |
| 46 | 260-37200 | SAFETY PLATE | (1) |
| 47 | SH-4040655-SP | SCREW M4 L=6 | (2) |
| 48 | WP-0430800-SD | WASHER M4 | (2) |
| 49 | TA-1250406-RO | RUBBER PLUG D=12.5 L=4 | 2 |
| 50 | PS-0500102-KH | SPRING PIN 5.0X10 | 1 |
| SM-4040856-SP | SCREW | 1 | |
| SM-6040650-TP | SCREW | 1 | |
| SM-4040855-SP | SCREW | 1 | |
| CH-3013000-01 | SAFETY LABEL | 1 | |
| SM-6083042-CH | SCREW M6 L=30 | 4 | |
| SM-6050800-SP | SCREW M5 L=8 | 2 | |
| SM-8060610-TP | SCREW | 1 | |
| SM-6040600-SP | SCREW M4 L=6 | 2 | |
| SM-8060612-TP | SIDE COVER, HINGE SHAFT, LEFT | 2 | |
| SM-4040655-SP | SCREW M4 L=6 | (1) |
Page 6 — 3. LOOPER SHAFT MECHANISM COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | CS-079072A-TH | THRUST COLLAR ASM. | 1 |
| 2 | CS-0790721-TH | THRUST COLLAR D=7.94 W=7 | (1) |
| 3 | SS-7090620-TP | SCREW 9/64-40 L=6.1 | (1) |
| 4 | SM-6040800-SP | SCREW | 1 |
| 5 | 400-38484 | NEEDLE_GUARD | 1 |
| 6 | 260-13607 | POSITIONING FINGER YOKE SLIDE | 1 |
| 7 | SM-1040950-TP | SCREW M4 L=9 | 2 |
| 8 | 260-13409 | YOKE SLIDE INSERT | 1 |
| 9 | 260-13805 | YOKE SLIDE | 1 |
| 10 | 400-38400 | ASSY_LOOP_POSITIONING_FINGER_L | 1 |
| 11 | 400-38403 | LOOP_POSITIONING_FINGER_CAM_R0 | (1) |
| 12 | SD-0640246-SP | HINGE SCREW D=6.35 H=2.4 | 1 |
| 13 | SM-8061010-TP | SCREW | 1 |
| 14 | B1241-377-0B0 | THROAT PLATE SET | 1 |
| 15 | B1241-377-0A0 | THROAT PLATE ASM. | (1) |
| 16 | B2703-377-0A0 | THREAD BIND PLATE ASM. | (1) |
| 17 | B2702-377-000 | THREAD BIND SUPPORT PLATE | (1) |
| 18 | B2410-373-000 | COUNTER KNIFE | (1) |
| 19 | SS-7080310-SP | SCREW 1/8-44 L= 3.0 | (2) |
| 20 | B2406-373-0AO | MOVING KNIFE ASM. | (1) |
| 21 | SD-0600095-TH | HINGE SCREW D= 6 H= 0.85 | (1) |
| 22 | 400-41106 | ASSY_LOOP_POSITIONING_FINGER_C | 1 |
| 23 | 260-03103 | LOOP POSITIONING FINGER CAM | (1) |
| 24 | SS-8110410-TP | SCREW 11/64-40 L= 3.5 | (2) |
| 25 | 400-38482 | ASSY_CAM_AND_LOOPER_SLEEVE | 1 |
| 26 | 260-15603 | CAM AND LOOPER SLEEVE | (1) |
| 27 | SS-8150410-TP | SCREW 15/64-28 L= 4.0 | (2) |
| 28 | B1228-372-000 | LOOP POSITIONING FINGER CAM RE | 1 |
| 29 | SS-8110310-SP | SCREW 11/64-40 L= 2.8 | 2 |
| 30 | 260-15305 | LOOPER SHAFT BUSHING FRONT | 1 |
| 31 | SM-8061010-TP | SCREW | 1 |
| 32 | 400-38111 | LOOPER_SHAFT | 1 |
| 33 | CS-111101K-SH | THRUST COLLAR ASM. D=11.11 W=1 | 1 |
| 34 | CS-1111019-SH | THRUST COLLAR D=11.11 W=10 | (1) |
| 35 | SS-8660512-TP | SCREW 1/4-40 L=5 | (1) |
| 36 | SS-8660512-TP | SCREW 1/4-40 L=5 | (1) |
| 37 | B1224-372-0A0 | LOOPER SHAFT DRIVEN GEAR ASM. | 1 |
| 38 | SS-8660612-TP | SCREW 1/4-40 L=6 | (2) |
| 39 | B1215-372-A00 | THRUST BALL BEARING | 1 |
| 40 | 260-13102 | LOOPER SHAFT BUSHING REAR | 1 |
| 41 | B1221-373-NA0 | WORM WHEEL ASM. | 1 |
| 42 | B1221-373-NOO | WORM | (1) |
| 43 | SS-6660712-TP | SCREW 1/4-40 L= 7.0 | (2) |
| 44 | B1220-372-000 | CAM SHAFT DRIVEN GEAR | (1) |
| 45 | SS-8660612-TP | SCREW 1/4-40 L=6 | (2) |
| 46 | B1239-372-000 | LOOPER | 1 |
| 47 | SM-1040950-TP | SCREW M4 L=9 | 3 |
| 260-13605 | YOKE SLIDE | ||
| SN-8061010-TP | SCREW | ||
| B1241-377-080 | THROAT PLATE SET | ||
| 260-15503 | CAM AND LOOPER SLEEVE | ||
| CS-1111016-SH | THRUST COLLAR ASM. D=11.11 W=1 |
Page 8 — 4. NIPPER & THREAD TENSION PARTS COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | SH-4061255-SP | SCREW M6 L=12 | 1 |
| 2 | 400-38205 | NEEDLE_BAR_GUARD | 1 |
| 3 | SD-0791276-TP | SHOULDER SCREW | 2 |
| 4 | NW-6030001-SN | NUT | 1 |
| 5 | 260-20602 | NUT | 1 |
| 6 | 260-00950 | NIPPER COMPL. | 1 |
| 7 | 260-20503 | LOOPER SHAFT BUSHING REAR | 1 |
| 8 | 400-41077 | NIPPER_BAR_BLOCK_SPRING | 1 |
| 9 | 400-38492 | NIPPER_BAR_BLOCK_SPRING_SCREW | 1 |
| 10 | SD-0402001-TP | HINGE SCREW D=4 H=20 | 1 |
| 11 | 260-20404 | NIPPER SLIDE BLOCK SPRING | 1 |
| 12 | 260-20305 | NIPPER BLOCK | 1 |
| 13 | SD-0791506-TP | SHOULDER SCREW D=7.94 H=15 | 1 |
| 14 | 400-38476 | THREAD_PULL_OFF_LEVER_ASM | 1 |
| 15 | SD-0790806-TP | SHOULDER SCREW D=7.94 H=8 | 1 |
| 16 | 260-00455 | NIPPER BAR ACTUATING LEVER ASM | 2 |
| 17 | 260-20206 | THREAD GUIDE PIN | 1 |
| 18 | 260-19406 | NIPPER BAR BLOCK SPRING PIN | 1 |
| 19 | SH-6040800-SP | SCREW | 2 |
| 20 | WP-0450801-SP | WASHER | 2 |
| 21 | 260-19307 | NIPPER BAR BLOCK | 1 |
| 22 | 260-19208 | TENSION LEVER ROCKING PIECE | 1 |
| 23 | 400-38479 | NIPPER_BAR | 1 |
| 24 | SM-6040800-SP | SCREW | 1 |
| 25 | 400-38208 | TENSION_POST_ASM_NO.2 | (1) |
| 26 | 400-38214 | TENSION_NUT | (1) |
| 27 | 229-21407 | ROTATION STOPPER | (1) |
| 28 | 260-19901 | THREAD TENSION SPRING | (1) |
| 29 | 260-20107 | THREAD TENSION DISK PRESSER | (2) |
| 30 | 260-05207 | THREAD TENSION DISK_NO.1 | (1) |
| 31 | 400-38210 | TENSION_POST_NO.2 | (1) |
| 32 | 260-19802 | TENSION_RELEASE_PIN | (1) |
| 33 | NW-6060001-CP | NUT M6 | 1 |
| 34 | PS-0300162-KH | SPRING PIN 3X16 | 1 |
| 35 | SM-6040800-SP | SCREW | 1 |
| 36 | WP-0450801-SP | WASHER | 1 |
| 37 | 260-19109 | THREAD TENSION RELEASING LEVER | 1 |
| 38 | 400-38404 | ASSY_THREAD_TENSION_NO.1 | (1) |
| 39 | 400-38408 | THREAD_TENSION_NUT | (1) |
| 40 | 260-05306 | FIRST THREAD TENSION SPRING | (2) |
| 41 | 260-05207 | THREAD TENSION DISK_NO.1 | (1) |
| 42 | 400-38406 | THREAD_TENSION_POST_NO.1 | 1 |
| 43 | 260-19505 | THREAD GUIDE | 1 |
| 44 | 260-21402 | THREAD GUIDE NO.1 | 1 |
| 45 | NW-6040002-SN | NUT M4 | 1 |
| 46 | SM-4061255-SP | SCREW M6 L=12 | 1 |
| 47 | 400-38396 | NIPPER_BAR_BEARING_BLOCK | 1 |
| 48 | 400-38206 | ADJUSTING_SCREW | 1 |
| 49 | WP-0550800-SP | WASHER 5.5X10X0.8 | 1 |
| 50 | SM-7051460-TP | SCREW M5 L=14 | 1 |
| 51 | SM-6051400-SP | SCREW | 1 |
| 52 | 260-19000 | THREAD TENSION SPRING | 1 |
| 53 | 400-38207 | NIPPER_BAR_SPRING_SCREW | 1 |
| 54 | WP-0450846-SP | WASHER | 1 |
| 55 | SM-9061403-CP | SCREW M6 L=14 | 1 |
| 56 | NW-6060001-SE | NUT M6 | 1 |
| 57 | 260-21105 | THREAD GUIDE | 1 |
| 58 | 400-38320 | LEVER | 1 |
| 59 | SM-6040600-SP | SCREW M4 L=6 | 1 |
| 60 | WP-0501016-SD | WASHER 5X10.5X1 | 1 |
| NM-6030001-SN | NUT | 1 | |
| 320-21457 | ROTATION STOPPER | 1 | |
| NM-6060001-CP | NUT M6 | 1 | |
| NM-6040002-SR | NUT M4 | 1 | |
| NM-6060001-SE | NUT M6 | 1 |
Page 10 — 5. FEED PLATE COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | B2529-373-000 | FEED PLATE, SMALL BUTTON | 1 |
| 2 | SS-9120643-TP | SCREW 3/16-28 L=6 | 2 |
| 3 | 260-24604 | INDICATOR PIN BEARING BLOCK | 1 |
| 4 | 260-24901 | CROSSHISE FEED INDICATOR | 1 |
| 5 | 260-24703 | CROSSHISE FEED INDICATOR PIN | 1 |
| SS-91206413-28 | L=6 | 2 | |
| 250-24504 | INDICATOR PIN BEARING BLOCK | 1 | |
| 260-24501 | CROSSWISE FEED INDICATOR | 1 | |
| NM-6060001-CP | NUT M5 | 1 | |
| 400-38498 | SLIDE_PLATE_CONNECTING_LINK | 1 | |
| SD-0640481-TP | HINGE SCREW D= 6.35 H= 4.8 | 1 | |
| 400-38499 | STUD | 1 | |
| 260-24208 | INTERMEDI CONNECTING LINK | 1 | |
| 400-41052 | CROSSWISE_FEED_GRADUATED_PLATE | 1 | |
| NM-6050001-CP | CAM ROLL | 1 | |
| 260-23200 | CAM ROLL | 1 | |
| 400-41030 | LENGTHWISE_FEED_LEVER_ARM A373 | 1 | |
| 400-38439 | LENGTHWISE_FEED_LEVER_SLIDE | 1 | |
| 400-38496 | CAM ROLL SCREW_STUD | 1 | |
| SM-8061212-TP | SCREW M6X12 | 1 | |
| 260-26106 | SPACER PLATE | 1 | |
| B2522-373-000 | FEED PLATE | 1 | |
| 400-38221 | HINGE SCREW FOR CROSSWISE FEED | 1 | |
| 400-38453 | FEED_STUD_C | 1 | |
| B1161-227-000 | FEED PLATE, SMALLBUTTON | 1 | |
| 400-41055 | WASHER 5X10.5X1 | 2 | |
| 400-41056 | LENGTHWISE_FEED_LEVER_ARM | 1 | |
| 400-41057 | LENGTHWISE_FEED_LEVER_SLIDE | 1 | |
| D2529-373-BP | FEED_LEVER_R | 1 | |
| WP-0501016-TP | FEED_LEVER_R | 1 | |
| 400-38432 | PLATE_BASE_(MB-1377) | 1 | |
| 400-38433 | PLATE_BASE_(MB-1377) | 1 | |
| 400-41061 | GRADUATE_PLATE_(MB-1377) | 1 | |
| SM-9050813-TP | GRADUATE_PLATE_(MB-1377) | 1 | |
| 400-42279 | HANDLE_AND_INDICATOR_SPRING | 1 | |
| 400-38436 | SCREW M4 L=6 | 2 | |
| 400-38313 | SCREW | 1 | |
| 400-38314 | KNOB | 1 | |
| 400-42281 | INDICATOR SPRING CONNECTING LI | 1 | |
| SM-4040655-TP | SCREW 9/32-28 D=6.35 H=9.7 | 1 | |
| SM-4050855-TP | CAM_SHAFT | 1 | |
| 400-38442 | LENGTHWISE_FEED_CAM | 1 | |
| 400-40965 | LONGITUDINAL FEED CAM | 1 | |
| SD-0640876-TP | CAM SHAFT BUSHING,RIGHT | 1 | |
| 400-38444 | LATERAL_FEED_CAM | 1 | |
| 400-41032 | LONGITUDINAL_FEED_CAM_A | 1 | |
| B2506-373-000 | SHOULDER SCREW D=6.35 H=4.8 | 1 | |
| 260-22509 | SCREW 9/32-28 L=13.5 | 4 | |
| 400-41025 | THRUST_COLLAR_ASSY | 1 | |
| 400-41045 | THRUST_COLLAR | 1 | |
| SM-8681412-TP | FEED_SHOULDER_SCREW_FELT | 1 | |
| 400-40964 | OIL FELT | 0.06 | |
| CQ-3000000-70 | OIL FELT | 0.06 | |
| CQ-2520000-00 | OIL WICK | 0.3 |
Page 12 — 6. BUTTON CLAMP LIFTER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-38119 | LIFTING_LEVER | 1 |
| 2 | 260-18101 | BUSHING | 1 |
| 3 | 400-38116 | NEEDLE_BAR_LEVER | 1 |
| 4 | WP-0851216-SC | WASHER 8.5X18.0X1.2 | 1 |
| 5 | B4420-373-000 | CUSHION | 1 |
| 6 | WP-0851216-SC | WASHER 8.5X18.0X1.2 | 1 |
| 7 | WP-0751576-SD | WASHER 7.5X19X1.5 | 1 |
| 8 | 105-10808 | WASHER | 1 |
| 9 | WP-0751576-SD | WASHER 7.5X19X1.5 | 1 |
| 10 | WP-0751576-SD | WASHER 7.5X19X1.5 | 1 |
| 11 | B4420-373-000 | CUSHION | 1 |
| 12 | WP-0703516-SP | WASHER 7X20X3.5 | 1 |
| 13 | 260-33407 | SPRING | 1 |
| 14 | 260-33308 | WASHER | 1 |
| 15 | B4411-372-000 | BUTTON CLAMP LIFTING LINK | 1 |
| 16 | 400-40962 | ASSY_SLIDING_ROLLER | 1 |
| 17 | 400-40953 | SLIDING_ROLLER | (1) |
| 18 | SM-8060612-TP | SCREW M6 L=6 | (1) |
| 19 | 400-38321 | ECCENTRIC_CAM | 1 |
| 20 | 400-38398 | ECCENTRIC_CAM | (1) |
| 21 | SN-8060412-TP | SCREW | (2) |
| 22 | 400-38146 | BUTTON_CLAMP_LIFTING_LINK_SET | 1 |
| 23 | 400-40966 | BUTTON_CLAMP_LIFTING_LINK | (1) |
| 24 | 400-38149 | LIFTING_HOOK | (1) |
| 25 | SD-0640276-TP | SHOULDER SCREW D=6.35 H=2.7 | (2) |
| 26 | 400-40963 | TENSION_SPRING_RACK_B | (1) |
| 27 | SD-0500726-TP | SHOULDER SCREW D=5 H=7.2 | (1) |
| 28 | 400-38150 | LIFTING_HOOK_SPRING | (1) |
| 29 | NW-6050001-SP | NUT M5 | (1) |
| 30 | WP-0410846-SC | WASHER | (1) |
| 31 | SM-6030402-TP | SCREW M3X0.5 L=4 | 1 |
| 32 | SD-0640481-SP | HINGE SCREW D= 6.35 H= 4.8 | 1 |
| 33 | SD-0640211-SP | HINGE SCREW D= 6.35 H= 2.1 | 1 |
| 34 | WP-0330501-SB | WASHER M3 | 1 |
| 35 | 400-38283 | L_TYPE_LIFTING_BAR_ROLLER | 1 |
| 36 | 400-38502 | BUTTON_CLAMP_LIFTING_ROD_A | 1 |
| 37 | SN-6061002-TP | SCREW M6 L=10 | 1 |
| 38 | 400-38428 | CONNECTING_LINK_FRONT | 1 |
| 39 | 260-22202 | JOINT STUD | 1 |
| 40 | B1632-180-000 | FEED ADJUSTING JOINT | 1 |
| 41 | WP-0510516-SD | WASHER 5.1X7.5X0.5 | 1 |
| 42 | NW-6050001-SP | NUT M5 | 2 |
| 43 | 400-38219 | CONNECTING_SCREW | 1 |
| 44 | NW-6080021-SP | NUT M8 TYPE1 | 2 |
| 45 | 400-38429 | CONNECTING_LINK_REAR | 1 |
| 46 | SD-0640323-TP | HINGE SCREW D= 6.35 H= 3.2 | 1 |
| 47 | SD-0790402-TP | HINGE SCREW D= 7.94 H= 4 | 1 |
| 48 | NS-6620310-SP | NUT 3/16-32 | 1 |
| 49 | NS-6150310-SP | NUT 15/64-28 | 1 |
| 50 | 400-38397 | THREAD_TRIMMING_LEVER | 1 |
| 51 | SD-0790316-TP | SHOULDER SCREW D=7.94 H=3.1 | 1 |
| 52 | NM-6050001-SP | NUT M5 | 1 |
| 53 | 400-38495 | THREAD_TRIM_LEVER_BASE | 1 |
| 54 | SN-7051460-TP | SCREW M5 L=14 | 2 |
| 55 | 260-21709 | THREAD TRIMMING LINK | 1 |
| 56 | SD-0641322-TP | HINGE SCREW D=6.35 H=13.2 | 1 |
| 57 | 260-33605 | SPRING | 1 |
| 58 | CS-0950810-SH | THRUST COLLAR ASM. D=9.5 W=8 | 2 |
| 59 | CS-0950816-SH | THRUST COLLAR D=9.5 W=8 | (1) |
| 60 | SS-8110410-TP | SCREW 11/64-40 L=3.5 | (2) |
| 61 | 400-38445 | LEVER_SHAFT | 1 |
| 62 | SN-8081010-TP | SCREW | 2 |
| 63 | 260-32508 | LIFTING LINK | 1 |
| 64 | 400-38414 | LIFTING_PLATE_GUIDE_ROD_ASM | 1 |
| 65 | 400-38413 | LIFTING_PLATE_GUIDE_ROD | (1) |
| 66 | SM-6051600-SP | SCREW M5 L=16 | (1) |
Page 13 — 7. NEEDLE DRIVING PULLEY SHAFT COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | B1203-372-000 | BALL LARGE | 1 |
| 2 | 260-12401 | PULLEY INSERT | 1 |
| 3 | 400-38203 | BALL_SMALL | 1 |
| 4 | 260-12500 | SPRING | 1 |
| 5 | 400-38169 | DRIVING_PULLEY_ASY. | 1 |
| 6 | 400-38175 | DRIVING_PULLEY | (1) |
| 7 | SW-8040612-TP | SCREW M4 L=6 | (1) |
| 8 | 400-38449 | NEEDLE_DRIVING_PULLEY_SHAFT | 1 |
| 9 | B1243-372-000 | NEEDLE BEARING | 2 |
| 10 | 260-12609 | GREASE RTETAINING WICK | 1 |
| 11 | 260-12708 | RETAINING WASHER | 1 |
| 12 | SW-6062450-TP | SCREW M6 L=23.5 | 2 |
| 13 | WP-0621026-SP | WASHER 6.2X9.5X1 | 2 |
| 14 | B1203-372-000 | NEEDLE DRIVING PULLEY CLUTCH D | 1 |
| 15 | 400-38137 | STOP_MOTION_DISC_ASY. | 1 |
| 16 | 400-38135 | STOP_MOTION_DISC_LATCH_A | (1) |
| 17 | 400-38136 | STOP_MOTION_DISC_LATCH_B | (1) |
| 18 | 400-38138 | STOP_MOTION_DISC | (1) |
| 19 | 400-38139 | STOP_MOTION_PAWL_SHAFT | (2) |
| 20 | 400-38140 | STOP_MOTION_DISC_WASHER | (1) |
| 21 | SW-6060550-TP | SCREW M6 L=4.5 | (1) |
| 22 | CW-5002000-01 | DIRECTION LABEL. | 1 |
| 23 | SW-8080812-TP | SCREW M8X8 | 1 |
| 24 | SW-8081752-TP | SCREW M8 L=17 | 1 |
| 25 | NW-6060003-SP | NUT M6 TYPE3 | 2 |
| 26 | B1215-372-000 | THRUST BALL BEARING | 1 |
| 27 | SW-8061010-TP | SCREW | 1 |
| 28 | 400-38461 | PULLEY_SHAFT_BUSHING_RIGHT | 1 |
| 29 | 400-42148 | PULLET_SHAFT_BUSHING_LEFT | 1 |
| 30 | B1217-372-0BA | DRIVING GEAR (A) ASH. | 1 |
| 31 | SS-8660612-TP | SCREW 1/4-40 L=5 | (2) |
| 32 | 260-18309 | OIL WICK | 1 |
| 250-12500 | SPRING | 1 | |
| SM-8040612-TP | SCREW M4 L=6 | (1) | |
| SM-6062450-TP | SCREW M6 L=23.5 | (1) | |
| RP-0521026-SP | WASHER 6.2X9X1 | (1) | |
| B1208-372-000 | NEEDLE DRIVING PULLEY CLUTCH D | (1) | |
| SM-6060550-TP | STOP MOTION DISC WASHER | (1) | |
| CM-5002000-01 | SCREW M6 L=4.5 | (1) | |
| SM-8080812-TP | DIRECTION LABEL | 1 | |
| SM-8081752-TP | SCREW M8 L=8 | 1 | |
| NM-6060003-SP | NUT M6 TYPE3 | 2 | |
| B1215-372-800 | THRUST BALL BEARING | 1 | |
| SM-8061010-TP | SCREW | 1 | |
| SS-8060512-TP | SCREW 1/4-40 L=6 | 1 |
Page 14 — 8. NEEDLE BAR DRIVING MECHANISM COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | SS-7080510-TP | SCREW 1/8-44 L=4.5 | 1 |
| 2 | 146-06107 | NEEDLE ROD | 1 |
| 3 | 260-17707 | NEEDLE BAR BUSHING LOWER | 1 |
| 4 | 400-40951 | NEEDLE_BAR_BALANCE | 1 |
| 5 | 400-40952 | NEEDLE_BAR_CLAMP | 1 |
| 6 | SM-6041200-SP | SCREW M4 L=12 | 1 |
| 7 | 400-38142 | NEEDLE_BAR_BUSHING_UPPER | 1 |
| 8 | 400-38120 | NEEDLE_BAR_SLIDE_BLOCK_A | 1 |
| 9 | 400-38121 | NEEDLE_BAR_SLIDE_BLOCK_B | 1 |
| 10 | 400-38122 | NEEDLE_BAR_SLIDE_BLOCK_C | 1 |
| 11 | NTQ-100B1600 | NEEDLE TQX1 #16 | 1 |
| 12 | 400-38117 | NEEDLE_BAR_DRIVING_LEVER | 1 |
| 13 | SM-9061403-CP | SCREW M6 L=14 | 2 |
| 14 | SD-0950804-TP | SHOULDER SCREW D=9.53 H=8 | 1 |
| 15 | 260-18705 | WASHER | 1 |
| 16 | 260-18457 | CRANK ROD ASM. | 1 |
| 17 | SS-2110920-TP | SCREW 11/64-40 L=8.5 | (2) |
| 18 | 260-18606 | THRUST HOLDER | (1) |
| 19 | 260-18408 | CRANK ROD | (1) |
| 20 | 260-18507 | ECCENTRIC CAM | (1) |
| 21 | SS-8660612-TP | SCREW 1/4-40 L=6 | (1) |
| 22 | SS-8660942-TP | SCREW 1/4-40 L= 8.5 | (1) |
| 23 | 260-18309 | OIL WICK | 1 |
| 24 | 400-41045 | OIL_RETAINING_FELT | 1 |
| 25 | CQ-2500000-FO | OIL WICK | 0.01 |
| 26 | CQ-2020000-00 | OIL WICK | 0.1 |
| WTQ-100B1600 | NEEDLE TOX1 #16 | 1 | |
| SD-0960804-TP | SHOULDER SCREW D=9.53 H=8 | 1 |
Page 15 — 9. STOP MOTION MECHANISM COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 260-27805 | STOP MOTION PLUNGER ROD | 1 |
| 2 | NW-6060003-SP | NUT M6 TYPE3 | 1 |
| 3 | 400-38118 | CROSSING_HOOK | 1 |
| 4 | SH-6061150-TP | SCREW M6 L=11 | 1 |
| 5 | B2602-372-000-A | STOP MOTION PLUNGER LEVER | 1 |
| 6 | 262-29104 | WASHER | 2 |
| 7 | 400-38110 | STOP_MOTION_SPRING | 30 |
| 8 | B2608-280-000 | RUBBER CUSHION | 4 |
| 9 | 260-30601 | WASHER | 1 |
| 10 | NS-6680410-SP | NUT 9/32-28 | 2 |
| 11 | 400-38448 | STOP_MOTION_SHAFT | 1 |
| 12 | 400-42437 | SCREW | 1 |
| 13 | SS-8151570-SP | SCREW 16/64-28 L=15.0 | 1 |
| 14 | NS-6150310-SP | NUT 15/64-28 | 1 |
| 15 | SD-0680276-TP | SHOULDER SCREW D=6.8 H=2.7 | 1 |
| 16 | NW-6060001-CP | NUT M6 | 1 |
| 17 | SD-0710706-TP | SHOULDER SCREW D=7.14 H=7 | 1 |
| 18 | 260-29207 | STITCH ADJUSTING ROLLER | 1 |
| 19 | WP-0612066-SP | WASHER 6.1X11X2 | 1 |
| 20 | 260-19604 | WASHER | 1 |
| 21 | SH-9061003-CP | SCREW M6 L=10 | 1 |
| 22 | 400-38160 | STOP_MOTION_TRIP_LEVER | 1 |
| 23 | 260-28308 | STOP MOTION TRIP LEVER BRACKET | 1 |
| 24 | SH-9061250-TP | SCREW M6 L=12 | 2 |
| 25 | 229-24906 | OIL REGULATOR SCREW SPRING | 1 |
| 26 | 131-60304 | S SHAPED HOOK | 1 |
| 27 | 260-28001 | STOP MOTION LEVER SPRING PIN | 1 |
| 28 | 400-38410 | STOP_MOTION_LEVER_SPRING | 1 |
| 29 | 400-40940 | SCREW_STUD | 1 |
| 30 | B2611-373-N00 | PRESSURE APPLYING LEVER | 1 |
| NM-6060003-SP | NUT M6 TYPES | 1 | |
| 262-20104 | WASHER | 2 | |
| NM-6060001-CP | NUT M6 | 1 | |
| RP-0512066-SP | WASHER 6.1X11X2 | 1 |
Page 16 — 10. STITCH SELECTING PARTS COMPONENTS / 針数調節関係
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | SD-1270346-TP | SHOULDER SCREW D=12.7 H=3.4 | 1 |
| 2 | 260-30304 | SPRING FOR FRICTION PLATE | 1 |
| 3 | 260-30307 | FRICTION PLATE ROTATING SHAFT | 1 |
| 4 | WP-0850002-SP | WASHER 8.5X18X1.6 | 1 |
| 5 | 260-30308 | SPEED SLOWING LEVER | 1 |
| 6 | 260-31005 | FITTING PLATE | 1 |
| 7 | 260-30106 | FRICTION PLATE HOLDER | 1 |
| 8 | B2640-372-000 | SPEED SLOWING FRICTION PLATE | 1 |
| 9 | B3211-232-000 | POSITIONING PIN | 2 |
| 10 | NS-6110310-SP | NUT 11/64-40 | 1 |
| 11 | SD-0710706-TP | SHOULDER SCREW D=7.14 H=7 | 1 |
| 12 | B2529-372-000 | STITCH SELECTING SPUR GEAR, M1 | 1 |
| 13 | 400-40943 | INTERMEDIATE GEAR SHAFT | 1 |
| 14 | 400-40942 | ASSY SPEED SLOWING FRICTION WH | 1 |
| 15 | SW-8061010-TP | SCREW | (2) |
| 16 | 400-40944 | SPEED SLOWING FRICTION WHEEL | (1) |
| 17 | B2630-372-000-A | GEAR, LARGE | 1 |
| 18 | B2631-372-000 | SCREW | 1 |
| 19 | B2632-372-000-A | ROLLER | 1 |
| 20 | 400-40946 | THREAD BIND NOTCH | 1 |
| 21 | 260-30609 | SPACER | 1 |
| 22 | SW-8040560-TP | SCREW M4X0.5 L=4.5 | 2 |
| 23 | SW-8050800-SP | SCREW M5 L=8 | 2 |
| 24 | SD-0800341-SP | HINGE SCREW D=8 H=3.4 | 1 |
| 25 | 400-38269 | STITCH ADJUSTING ARM ASM. | 1 |
| 26 | 400-38271 | STITCH ADJUSTING ARM | (1) |
| 27 | SW-6081602-TN | SCREW M6 L=16 | (1) |
| 28 | 260-29207 | STITCH ADJUSTING ROLLER | 1 |
| 29 | 400-41046 | STITCH ADJUSTING CAM A ASSY | 1 |
| 30 | 400-41054 | STITCH ADJUSTING CAM A ASM. | (1) |
| 31 | 400-41050 | NUT | (2) |
| 32 | 400-38304 | SCREW | (1) |
| 33 | SW-6040502-TP | SCREW M4X0.7 L=5 | (1) |
| 34 | SW-6040800-SP | SCREW | (2) |
| 35 | SW-6060812-TP | SCREW M6 L=8 | (2) |
| 36 | 400-41048 | SPACER | (1) |
| 37 | 400-41049 | STITCH CAM A | (1) |
| 38 | 400-41051 | STOP MOTION CAM SHOE | (1) |
Page 18 — 11. THREAD BIND NOTCH COMPONENTS (FOR MB-1377)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-38488 | THREAD_BIND_LEVER | 1 |
| 2 | 400-38452 | CONNECTING_PLATE_LARGE | 1 |
| 3 | SD-0640328-TP | SHOULDER SCREW D=6.35 H=3.2 | 1 |
| 4 | 400-38486 | CONNECTING_PLATE_SMALL | 1 |
| 5 | WP-0430800-SD | WASHER M4 | 2 |
| 6 | SW-6040650-TP | SCREW | 2 |
| 7 | SD-0720336-SP | SHOULDER SCREW | 1 |
| 8 | D2509-282-A00 | WORK CAMP FOOT BALL LINK | 1 |
| 9 | 400-38489 | THREAD_BIND_LINK_SHAFT | 2 |
| 10 | WP-0621026-SP | WASHER 6.2X9.5X1 | 2 |
| 11 | RC-0560711-KP | RETAINING RING | 2 |
| 12 | NW-6050001-SP | NUT M5 | 1 |
| 13 | 400-38456 | THREAD_BIND_ARM_B | 1 |
| 14 | NW-6050001-SP | NUT M5 | 1 |
| 15 | 400-38494 | THREAD_BIND_ARM_SPRING RAC | 1 |
| 16 | 260-17103 | SPRING | 1 |
| 17 | SD-0901806-TP | SHOULDER SCREW | 1 |
| 18 | 260-17301 | ROLLER | 1 |
| 19 | SD-0460576-TP | SHOULDER SCREW D=4.6 H=5.7 | 1 |
| 20 | NW-6040001-SP | NUT M4X0.7 | 1 |
| 21 | SD-0481456-TP | SHOULDER SCREW D=4.8 H=14.5 | 1 |
| 22 | 400-38306 | SPRING | 1 |
| 23 | 400-38305 | STITCH_ADJUSTING_CAM_KNOB | 1 |
| 24 | 400-38455 | ASS_THREAD_BIND_ARM_A | 1 |
| SH-6040650-TP | SCREW | 2 | |
| RC-0560711-RP | RETAINING RING | 1 | |
| NN-6050001-SP | NUT M5 | 1 | |
| NN-6040001-SP | NUT M4X0.7 | 1 |
Page 20 — 12. THREAD STAND COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 260-08359 | THREAD STAND ASM. | 1 |
| 2 | 229-30408 | SPOOL REST ROD, UPPER | (1) |
| 3 | 229-30309 | SPOOL REST ROD, LOWER | (1) |
| 4 | 260-08300 | THREAD STAND HOLDER PLATE | (1) |
| 5 | 260-08409 | THREAD RAISING THREAD GUIDE A | (1) |
| 6 | 229-31307 | SPOOL REST ROD JOINT | (1) |
| 7 | 229-31406 | SPOOL REST ROD RUBBER CAP | (1) |
| 8 | 229-31000 | SPOOL PIN | (1) |
| 9 | 229-30903 | SPOOL REST.CUSHION | (1) |
| 10 | 229-31109 | SPOOL RETAINER | (1) |
| 11 | WP-1612616-SE | WASHER 16X30X2.6 | (2) |
| 12 | NM-6160511-SE | NUT M16X1.5 | (3) |
| 13 | 260-08557 | SPOOL REST BRACKET ASM. | (1) |
| 14 | SM-4051405-SE | SCREW M5 L=14 | (2) |
| 15 | NM-6050001-SE | NUT M5 | (2) |
| 16 | NM-6050001-SE | NUT M5 | (1) |
| 17 | SM-9061080-SE | SCREW M6 L=10 | (1) |
| 18 | SM-9050813-SE | SCREW M5X0.8 L=8 | (1) |
| 19 | WP-0520656-SA | WASHER 5.2X9.5X0.6 | (1) |
| 20 | WS-0510002-KN | SPRING WASHER | (1) |
| 21 | WS-0521010-KN | SPRING WASHER 5.2X8.2X1 | (1) |
| 22 | 229-31208 | THREAD GUIDE | (1) |
Page 22 — 13. TABLE & STAND COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-40871 | TABLE | 1 |
| 2 | 111-59365 | T STAND JUNCTION | 1 |
| 3 | 111-55108 | DRAWER | 1 |
| 4 | 111-56207 | DRAWER SUPPORT | 2 |
| 5 | D8204-655-D00 | DRAWER STOPPER | 1 |
| 6 | SK-3311600-SE | WOOD SCREW D=3.1 L=16 | 6 |
| 7 | SK-3483200-SE | WOOD SCREW D=4.8 L=32 | 4 |
| 111-56365 | STAND JUNCTION | 1 | |
| 111-56108 | DRAWER | 1 | |
| D8204-555-D00 | DRAWER STOPPER | 2 | |
| SK-3311500-SE | WOOD SCREW D=3.1 L=16 | 1 |
Page 24 — 14. ACCESSORIE PARTS COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 228-33303 | VINYL COVER | 1 |
| 2 | 229-33006 | SCREW DRIVER,LARGE | 1 |
| 3 | MTQ-100B1602 | NEEDLE TQX1 #16-2 | 1 |
| 4 | 400-41072 | BASE_SCREW_SET | 1 |
| 5 | 400-38174 | RUBBER_CUSHION | (4) |
| 6 | SS-9156830-SP | SCREW 15/64-28 L=68 | (4) |
| 7 | WP-0612066-SD | WASHER 6.1X18.5X2 | (4) |
| 8 | NS-6150310-SP | NUT 15/64-28 | (4) |
| 9 | 400-41073 | ACCESSORIE_BAG_ASM. | 1 |
| 10 | 229-33105 | SCREW DRIVER,MIDDLE | (1) |
| 11 | 260-34702 | WRENCH | (1) |
| 12 | 260-34801 | WRENCH | (1) |
| 13 | 400-33327 | FRAME_SUPPORT_BAR | (1) |
| 14 | 400-38459 | STITCH_NUMBER_LEVER | (1) |
| 15 | 260-30809 | SPACER | (1) |
| 16 | 400-40946 | THREAD_BIND_NOTCH | (1) |
| 17 | SM-6040560-TP | SCREW M4X0.5 L=4.5 | (2) |
| 18 | 131-60304 | S SHAPED HOOK | (2) |
| 19 | SD-0600346-TP | SHOULDER SCREW D=6 H=3.4 | (1) |
| 20 | 400-38205 | NEEDLE_BAR_GUARD | (1) |
| 21 | 260-37903 | CHAIN | (1) |
| 22 | J1067-000-000 | OILER | (1) |
| 23 | 229-32800 | ACCESSORIE BAG | (1) |
| 24 | 400-65591 | HEXAGONAL WRENCH KYE | (1) |
| 25 | MTJ-VM00000C | V ROPE 820MM (LACING) | 1 |
| 26 | 400-38286 | MOTOR_PULLEY_60HZ_1300RPM_ASM. | 1 |
| 27 | SN-8061010-TP | SCREW | (2) |
| 28 | 400-38285 | MOTOR_PULLEY_60HZ_1300RPM_ASM. | 1 |
| 29 | SN-8051010-TP | SCREW | (2) |
Page 25 — 15. SPECIAL ORDER SPEC COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | MAZ-201010A0 | PICK-UP DEVICE ASM. L BUTTON | 1 |
| 2 | 400-38290 | MOTOR_PULLEY_60HZ_1500RPM_ASM | 1 |
| 3 | B2656-372-0AA | BUTTON CLAMP JAW LEVER ASM., L | 1 |
| 4 | B2658-372-0AA | BUTTON CLAMP JAW LEVER ASM., R | 1 |
| 5 | B2656-372-CAA | BUTTON CLAMP JAW LEVER ASM., L | 1 |
| 6 | B2658-372-CAA | BUTTON CLAMP JAW LEVER ASM., R | 1 |
| 7 | D2529-373-C00-A | FEED PLATE, LARGE BUTTON | 1 |
Page 26 — 16. SUBCLASS COMPONENTS (FOR MB-1373-11)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-41032 | LENGTHWAISE_FEED_CAM(X) | 1 |
Juki MB-1373 / MB-1377 — parts catalog
- Page 1 (cover): This is the cover page for the JUKI MB-1373 and JUKI MB-1377 parts book, including contact information for the distributor and the title "PARTS BOOK".
- Page 2 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, quantities, and some Japanese text.
- Page 3 (diagram): This page displays a diagram of arm and miscellaneous covers components, with numbered parts for identification.
- Page 4 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, quantities, and some Japanese text.
- Page 5 (diagram): This page displays a diagram of looper shaft mechanism components, with numbered parts and their corresponding references.
- Page 6 (parts_list): This page contains a parts list for various components of an industrial sewing machine, including screws, collars, plates, and gears, with their corresponding part numbers and descriptions.
- Page 7 (diagram): This page displays a diagram of nipper and thread tension parts components, with numbered parts for identification.
- Page 8 (parts_list): This page lists parts for a sewing machine, including screws, nuts, washers, and various specialized components like needle bar guards and tension levers, with their corresponding part numbers and descriptions.
- Page 9 (diagram): This page displays a diagram of feed plate components, with numbered parts and their corresponding references.
- Page 10 (parts_list): This page contains a parts list for various components of an industrial sewing machine, including feed plates, screws, indicators, levers, and other hardware, with corresponding part numbers and descriptions.
- Page 11 (diagram): This page displays a diagram of button clamp lifter components, with numbered parts and their corresponding references.
- Page 12 (parts_list): This page lists parts for a sewing machine, including part numbers, descriptions, quantities, and notes. It details items such as lifting levers, bushings, washers, screws, and various links and rollers.
- Page 13 (diagram): This page displays a diagram of needle driving pulley shaft components, along with a detailed parts list including part numbers, descriptions, and quantities.
- Page 14 (diagram): This page displays a diagram of the needle bar driving mechanism components, along with a parts list detailing part numbers, descriptions, and quantities.
- Page 15 (diagram): This page displays a diagram of stop motion mechanism components, along with a detailed parts list including part numbers, descriptions, and quantities.
- Page 16 (diagram): Exploded diagram of stitch selecting parts components with a parts table listing reference numbers, part numbers, descriptions and quantities for items 1 to 38.
- Page 17 (diagram): This page displays a diagram of thread bind notch components for model MB-1377, with numbered parts indicated.
- Page 18 (parts_list): This page lists parts for a sewing machine, including thread bind levers, connecting plates, shoulder screws, washers, retaining rings, nuts, and adjusting cam knobs, with their corresponding part numbers and quantities.
- Page 19 (diagram): This page displays a diagram of thread stand components, with numbered parts and their corresponding references.
- Page 20 (parts_list): This page contains a parts list for various components of a sewing machine, including stand assemblies, rod components, retainers, washers, and screws, with their corresponding part numbers, descriptions, and quantities.
- Page 21 (diagram): This page displays a diagram of table and stand components, with numbered parts indicated.
- Page 22 (parts_list): This page contains a parts list for a sewing machine, detailing part numbers, descriptions, and quantities for various components including screws and supports.
- Page 23 (diagram): This page displays a diagram of accessory parts and components, including various tools, fasteners, and other miscellaneous items, each identified by a reference number.
- Page 24 (parts_list): This page lists parts for a sewing machine, including VINYL COVER, SCREW DRIVER, NEEDLE, CASE SCREW SET, RUBBER CUSHION, SCREW, WASHER, ACCESSORIE BAG, WRENCH, FRAME SUPPORT BAR, STITCH NUMBER HOLDER, SPACER, THREAD BIND NOTCH, CHAIN, OILER, HEXAGONAL WRENCH, ROPE, MOTOR PULLEY, and SCREW.
- Page 25 (diagram): This page displays a diagram of special order spec components for an industrial sewing machine, along with a parts list detailing part numbers and descriptions.
- Page 26 (diagram): This page displays a diagram of subclass components for the MB-1373-11 machine, including a single part listed with its reference number, part number, description, and quantity.