Eastman 627X / 629X Parts Book (PDF)
Text index — Eastman 627X / 629X
Page 2 — Illustrated Parts List
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 4C1-99 | Sharpener Hold-Down Nut | 3 / 3 | |
| 4C1-150 | Sharpener Hold-Down Nut | 1 / 1 | |
| 4C1-179 | Front-to-Rear Bearing Nut | 4 / 4 | |
| 4C2-2 | Plate Bolt Nut | 1 / 1 | |
| 20C3-29 | Front-to-Rear Bearing Screw | 0 / 4 | |
| 20C3-35 | Front-to-Rear Bearing Screw | 4 / 0 | |
| 20C13-96 | Standard-to-Bearing Screw | 4 / 0 | |
| 24C4 | Plate Bolt | 1 / 1 |
Page 3 — Figure 20. Standard and Baseplate Assembly (Exploded View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 4C1-179 | |||
| 4C1-99 | |||
| 4C1-150 | |||
| 20C13-96 | |||
| 24C4 | |||
| 4C2-2 | |||
| 20C3-29 | |||
| 20C3-35 |
Page 4 — Figure 21. Single-Phase Motor Assembly (Assembled View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 4C1-149 | Shaft Lock Nut | 1/1 | |
| 4C2-87 | Nut, Clutch | 1/1 | |
| 8C5-10 | Automatic Switch Insulation | 1/1 | |
| 8C12-4 | Lead Wire Insulation | 2/2 | |
| 10C1-41 | Rotor Fan | 1/1 | |
| 12C1-12 | Leading Spring Washer | 1/1 | |
| 12C1-32 | Lock Washer | 1/1 | |
| 13C1-9 | Turning Knob | 1/1 | |
| 18C5-16 | Retaining Ring | 1/1 | |
| 22C1-24 | Camping Handle | 1/1 | |
| 30C1-8 | Dust Cap | 1/1 | |
| 34C1-51 | Clutch Spring | 1/1 | |
| 47C4-79 | Terminal | 1/1 | |
| 47C4-80 | Terminal | 1/1 | |
| 5307-38 | Fan Cover | 1 | |
| 7307-121 | Terminal Wire Tubing | 1 | |
| 90C6-40 | Rear Bearing Housing | 1 | |
| 25401 | Rear Ball Bearing | 1 | |
| 3000124-6 | Cable Tie, 4" | 4 | |
| 30108-1 | Screw, 8-32 x 3/8 Filister Head | 3 | |
| 3050A-1 | Screw, Binding Head | 10 | |
| 3050C10-1 | Screw, Binding Head | 1 | |
| 513C3-306 | Motor and Shaft | ||
| 514C5-108 | Stator with Band 110V 60 Hz, 3000 R.P.M. | 1 | |
| 514C5-113 | Stator with Band 220V 60 Hz, 3000 R.P.M. | 1 | |
| 514C5-114 | Stator with Band 110V 60 Hz, 1800/3000 R.P.M. | 1 | |
| 514C5-115 | Stator with Band 220V 60 Hz, 1800/3000 R.P.M. | 1 | |
| 514C5-116 | Stator with Band 110V 50 Hz, 3000 R.P.M. | 1 | |
| 514C5-118 | Stator with Band 220V 50 Hz, 1500/3000 R.P.M. | 1 | |
| 514C5-119 | Stator with Band 110V 50 Hz, 3600 R.P.M. | 1 | |
| 514C5-120 | Stator with Band 42V 50 Hz, 3000 R.P.M. | ||
| 514C5-121 | Stator with Band 42V 50 Hz, 1500/3000 R.P.M. | ||
| 514C5-122 | Stator with Band 100V 60 Hz, 3600 R.P.M. | 1 | |
| 514C5-123 | Stator with Band 100V 60 Hz, 1800/3000 R.P.M. | 1 | |
| 514C5-124 | Stator with Band 100V 60 Hz, 3000 R.P.M. | 1 | |
| 514C5-125 | Stator with Band 110V 50 Hz, 3600 R.P.M. | ||
| 514C5-126 | Stator with Band 110V 50 Hz, 1800 R.P.M. | ||
| 514C5-127 | Stator with Band 110V 60 Hz, 1800/3000 R.P.M. | ||
| 514C5-128 | Stator with Band 220V 60 Hz, 3000 R.P.M. | ||
| 514C5-129 | Stator with Band 220V 50 Hz, 1500/3000 R.P.M. | ||
| 514C5-137 | Stator with Band 220V 60 Hz, 3600 R.P.M. | ||
| 514C5-138 | Stator with Band 220V 50 Hz, 1800 R.P.M. | ||
| 514C5-139 | Stator with Band 100V 60 Hz, 1800/3000 R.P.M. | ||
| 514C5-140 | Stator with Band 100V 60 Hz, 3600 R.P.M. | ||
| 514C5-141 | Stator with Band 100V 60 Hz, 3000 R.P.M. | ||
| 514C5-142 | Stator with Band 220V 60 Hz, 1800/3000 R.P.M. | ||
| 514C5-155 | Stator with Band 100V 55 Hz, 1725/3300 R.P.M. | 1 | |
| 514C5-165 | Stator with Band 100V 55 Hz, 3300 R.P.M. | 1 | |
| 514C5-166 | Stator with Band 100V 55 Hz, 3600 R.P.M. | 1 | |
| 514C5-193 | Stator with Band 100V 55 Hz, 1800/3000 R.P.M. | ||
| 514C5-194 | Stator with Band 100V 55 Hz, 3000 R.P.M. | ||
| 514C5-195 | Stator with Band 100V 55 Hz, 3600 R.P.M. | 1 | |
| 507C2-14 | Cutout Assy 60 Cycle 3600 R.P.M. | 1 | |
| 507C2-15 | Cutout Assy 60 Cycle 1800 R.P.M. | 1 | |
| 507C2-16 | Cutout Assy 60 Cycle 1500 R.P.M. | 1 | |
| 507C2-17 | Cutout Assy 60 Cycle 1800/3000 R.P.M. | 1 | |
| 507C2-18 | Cutout Assy 60 Cycle 1500/3000 R.P.M. | 1 | |
| 507C2-25 | Cutout Assy 60 Cycle 1800/3000 R.P.M. | 1 | |
| 783C1-3 | Grounding Wire Assy. | 1 | |
| 4C1-145 | Shaft Lock Nut | 1 | |
| 4C2-67 | Nut, Clutch | 1 | |
| 8C1-1 | Lead Wire Insulation | 2 | |
| 12C1-41 | Motor Fan | 1 | |
| 180B-16 | Mounting Ring | 1 |
Page 5 — Figure 22. Single/Dual-Phase Motor Assembly (Exploded View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 300C12-6 | |||
| 22C1-24 | |||
| 73C7-121 | |||
| 783C1-3 | |||
| 12C1-32 | |||
| 305C10-1 | |||
| 73C7-121 | |||
| 8C12-4 | |||
| 8C5-10 | |||
| 301C12-3 | |||
| 90C1-146 | |||
| 90C6-46 | |||
| 12C1-12 | |||
| 513C3-206 | |||
| 513C3-225 | |||
| 47C4-80 | |||
| 47C4-79 | |||
| 254C1 | |||
| 301C8-1 | |||
| 13C1-9 | |||
| 34C1-51 | |||
| 4C6-145 | |||
| 4C2-87 | |||
| 18C6-16 | |||
| 58C7-35 | |||
| 305C6-1 | |||
| 10C1-41 | |||
| 30C1-8 | |||
| 580C1-192 | |||
| 580C1-191 | |||
| 514C5-109 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-110 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-113 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-117 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-119 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-120 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-121 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-122 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-124 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-127 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-128 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-130 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-131 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-132 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-133 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-134 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-135 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-136 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-137 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-138 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-139 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-140 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-141 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-142 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-143 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-144 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-145 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-146 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-195 | STATOR WITH BAND SINGLE-PHASE SINGLE-SPEED | ||
| 514C5-114 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 514C5-115 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 514C5-118 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 514C5-123 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 514C5-126 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 514C5-129 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 514C5-150 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 514C5-194 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 514C5-196 | STATOR WITH BAND SINGLE-PHASE DUAL-SPEED | ||
| 47C4-60 | |||
| 305C8-1 | |||
| 784C1-3 | |||
| 12C1-02 | |||
| 513C3-226 | |||
| 401-145 | |||
| 402-87 | |||
| BC5-10 | |||
| 59C7-36 | |||
| 6012-4 | |||
| 597C2-14 | CUTOUT SINGLE SPEED 60Hz 3600 R.P.M. | ||
| 597C2-15 | CUTOUT SINGLE SPEED 60Hz 3000 R.P.M. | ||
| 597C2-16 | CUTOUT SINGLE SPEED 60Hz 1800 R.P.M. | ||
| 597C2-17 | CUTOUT SINGLE SPEED 50Hz 1500 R.P.M. | ||
| 597C2-25 | DUAL SPEED 60 CY. 1800/3600 R.P.M. | ||
| 597C2-18 | DUAL SPEED 50 CY. 1500/3000 R.P.M. |
Page 6 — Three-Phase Motor Assembly
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1C4-8 | Screw, Cutout | 1 / 1 | |
| 4C1-149 | Shaft Lock Nut | 1 / 1 | |
| 4C2-87 | Nut, Clutch | 1 / 1 | |
| 10C1-41 | Rotor Fan | 1 / 1 | |
| 12C1-82 | Leading Spring Washer | 1 / 1 | |
| 12C1-32 | Lock Washer | 1 / 1 | |
| 13C1-8 | Turning Knob | 1 / 1 | |
| 18C6-11 | Retaining Ring | 1 / 1 | |
| 22C1-24 | Handle, Carrying | 0 / 1 | |
| 30C1-8 | Dust Cap | 1 / 1 | |
| 34C1-51 | Clutch Spring | 1 / 1 | |
| 53C7-35 | Fan Cover | 1 / 1 | |
| 67G1-10 | Cutout Mount | 1 / 1 | |
| 73C7-121 | Tuning Terminal Wire | 1 / 1 | |
| 79G2-26 | Plate, Direction Arrow | 1 / 1 | |
| 90C1-149 | Rear Bearing Housing | 1 / 1 | |
| 90C6-46 | Rear Ball Bearing | 1 / 1 | |
| 199C1-23 | Wire Lug | 3 / 3 | |
| 254C1 | Cable Tie | 1 / 1 | |
| 300C12-3 | Screw, 8-32 x 3/8 Round Hd. | 2 / 2 | |
| 300C12-8 | Screw, Round Hd. | 4 / 4 | |
| 301C8-1 | Screw, 4-40 x 1/2 Fillister Hd | 3 / 3 | |
| 306C8-1 | Screw, Binding Hd. | 10 / 10 | |
| 306C10-1 | Screw, Binding Hd. | 1 / 1 | |
| 512C3-200 | Rotor and Shaft | 0 / 1 | |
| 512C3-225 | Rotor and Shaft | 1 / 0 | |
| 514C5-116 | Stator with Band 100V 60 Hz. 3600 R.P.M. | 1 / 0 | |
| 514C5-130 | Stator with Band 125V 50 Hz. 3000 R.P.M. | 0 / 1 | |
| 514C5-135 | Stator with Band 208V 60 Hz. 3600 R.P.M. | 0 / 1 | |
| 514C5-143 | Stator with Band 220V 50 Hz. 3000 R.P.M. | 0 / 1 | |
| 514C5-144 | Stator with Band 220V 50 Hz. 1500 R.P.M. | 0 / 1 | |
| 514C5-145 | Stator with Band 220V 50 Hz. 1500/3000 R.P.M. | 0 / 1 | |
| 514C5-146 | Stator with Band 220V 60 Hz. 3600 R.P.M. | 0 / 1 | |
| 514C5-147 | Stator with Band 220V 60 Hz. 1800 R.P.M. | 0 / 1 | |
| 514C5-148 | Stator with Band 220V 60 Hz. 1800/3600 R.P.M. | 0 / 1 | |
| 514C5-151 | Stator with Band 380V 50 Hz. 3000 R.P.M. | 0 / 1 | |
| 514C5-152 | Stator with Band 380V 50 Hz. 1500 R.P.M. | 0 / 1 | |
| 514C5-155 | Stator with Band 220V 60 Hz. 3000 R.P.M. | 1 / 0 | |
| 514C5-157 | Stator with Band 220V 50 Hz. 3000 R.P.M. | 1 / 0 | |
| 514C5-158 | Stator with Band 220V 60 Hz. 1800/3600 R.P.M. | 1 / 0 | |
| 514C5-159 | Stator with Band 110V 50 Hz. 3000 R.P.M. | 0 / 1 | |
| 514C5-161 | Stator with Band 380V 50 Hz. 3000 R.P.M. | 1 / 0 | |
| 514C5-164 | Stator with Band 220/380V 50 Hz. 3000 R.P.M. | 0 / 1 | |
| 514C5-166 | Stator with Band 220/380V 50 Hz. 3000 R.P.M. | 1 / 0 | |
| 514C5-168 | Stator with Band 220V 60 Hz. 1800 R.P.M. | 1 / 0 | |
| 514C5-171 | Stator with Band 380V 50Hz 1500/3000 R.P.M. | 1 / 0 | |
| 514C5-172 | Stator with Band 380V 60 Hz. 1500 R.P.M. | 1 / 0 | |
| 514C5-173 | Stator with Band 220V 50Hz 1500/3000 R.P.M. | 1 / 0 | |
| 789C1-9 | Ground Wire Assy. | 1 / 1 |
Page 7 — Figure 24. Three-Phase Motor Assembly (Exploded View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 300C12-6 | |||
| 22C1-24 | |||
| 73C7-121 | |||
| 783C1-3 | |||
| 12C1-32 | |||
| 305C10-1 | |||
| 73C7-121 | |||
| 300C12-3 | |||
| 1C4-8 | |||
| 67C1-10 | |||
| 12C1-12 | |||
| 90C5-46 | |||
| 90C1-146 | |||
| 513C3-206 | |||
| 513C3-225 | |||
| 79C2-26 | |||
| 254C1 | |||
| 73C7-121 | |||
| 199C1-23 | |||
| 301C8-1 | |||
| 13C1-9 | |||
| 34C1-51 | |||
| 53C7-35 | |||
| 4C1-145 | |||
| 18C5-16 | |||
| 4C2-87 | |||
| 305C8-1 | |||
| 10C1-41 | |||
| 30C1-8 | |||
| 514C5-116 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-130 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-135 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-143 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-144 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-146 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-147 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-151 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-152 | STATOR WITH BAND THREE-PHASE SINGLE-SPEED | ||
| 514C5-145 | STATOR WITH BAND THREE-PHASE DUAL-SPEED | ||
| 514C5-148 | STATOR WITH BAND THREE-PHASE DUAL-SPEED | ||
| 514C5-150 | STATOR WITH BAND THREE-PHASE DUAL-SPEED | ||
| 514C5-158 | STATOR WITH BAND THREE-PHASE DUAL-SPEED | ||
| 514C5-171 | STATOR WITH BAND THREE-PHASE DUAL-SPEED | ||
| 514C5-173 | STATOR WITH BAND THREE-PHASE DUAL-SPEED | ||
| 90C6-46 | Attachment Plug Terminal Block | ||
| 79C7-121 | Attachment Plug Terminal Block | ||
| 16C6-16 | Attachment Plug Terminal Block |
Page 8 — EASTMAN Front Bearing Housing (90C2-162) with Oiler Assembly
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 4C1-111 | Operating Handle Lock Nut | 1 1 | |
| 4C1-132 | Crank Ball Bearing Lock Nut | 1 1 | |
| 4C1-190 | Lock Nut for Shaft | 1 1 | |
| 4C2-91 | Nut for Guide Screw | 3 3 | |
| 4C2-110 | Stop Nut | 1 1 | |
| 4C3-8 | Guide Adjustment Nut | 3 3 | |
| 11C12-92 | Shaft for Ball Bearing | 1 1 | |
| 12C1-81 | Shakeproof Washer | 2 2 | |
| 12C1-24 | Knife Lock Washer | 1 1 | |
| 12C10-2 | Washer | 3 3 | |
| 12C15-14 | Guide Washer | 6 6 | |
| 12C16-53 | Connecting Rod Washer | 1 1 | |
| 15C15-61 | Stud Upper | 2 2 | |
| 15C13-34 | Stud Lower L.H. Mounting | 1 1 | |
| 15C13-35 | Stud Lower R.H. Mounting | 1 1 | |
| 17C4-6 | Wrist Pin | 1 1 | |
| 19C6-79 | Lock Ring | 1 1 | |
| 18C8-80 | O-Ring | 1 1 | |
| 20C5-17 | Connecting Rod Clamp Screw | 2 2 | |
| 20C12-62 | Front Housing Plug Screw | 1 1 | |
| 20C13-70 | Screw for Handle Bracket | 1 1 | |
| 34C1-3 | Knife Lock Bolt | 1 1 | |
| 34C10-142 | Spring for Capacitor | 1 1 | |
| 52C5-194 | Switch Plate (Dual-Speed Three-Phase) | 1 1 | |
| 52C5-235 | Switch Plate (Single Speed) | 1 1 | |
| 52C5-236 | Switch Plate (Dual-Speed Single Phase) | 1 1 | |
| 53C3-111 | Switch Cover | 1 1 | |
| 53C5-2 | Oiler Tube Cover | 1 1 | |
| 53C11-81 | Capacitor Cover | 1 1 | |
| 54C4-32 | Wrist Pin Plug | 1 1 | |
| 63C1-146 | Handle Bracket | 1 1 | |
| 71C9-19 | Front Ball Bearing Retainer | 1 1 | |
| 73C4-26 | Oil Hole Cover | 1 1 | |
| 73C7-203 | Oil Tube, Clear | 1 1 | |
| 73C7-204 | Oiler Tube | 1 1 | |
| 88C1-52 | Crank 1-1/8 Stroke | 1 1 | |
| 88C1-46 | Crank 1-1/4 Stroke | 1 1 | |
| 88C1-45 | Crank 1-1/2 Stroke | 1 1 | |
| 88C1-44 | Crank 1-3/4 Stroke | 1 1 | |
| 90C2-162 | Front Bearing Housing | 1 1 | |
| 90C6-38 | Front Ball Bearing | 1 1 | |
| 90C6-46 | Sealed Crank Ball Bearing | 1 1 | |
| 91C4-35 | Rivet Crosshead | 2 2 | |
| 141C1-40 | Gauge Clear | 1 1 | |
| 191C1-21 | Cross Head Felt Pad | 1 1 | |
| 191C1-38 | Wrist Pin Felt Pad | 1 1 | |
| 191C1-42 | Oil Felt Wicking, Long | 1 1 | |
| 191C1-43 | Oil Felt Wicking, Short | 1 1 | |
| 191C1-45 | Oil Felt Wicking 1/8 x 4-4 | 1 1 | |
| 201C1-11 | Eyelet | 1 1 | |
| 222D1-7 | RTV Sealer | 1 1 | |
| 300C3-2 | Screw | 4 4 | |
| 302C8-2 | Screw, Flat Head 4-40 x 3/8 | 1 1 | |
| 300C10-4 | Screw, 6-32 x 3/8 Long Round Head | 2 2 | |
| 302C10-4 | Screw, 6-32 x 5/16 Flat Head | 4 4 | |
| 305C8-1 | Screw 4-40 x 1/4 Binding Head | 7 7 | |
| 307C15-1 | Screw | 1 1 | |
| 308C12-1 | Screw, 8-32 x 3/8 Socket Head | 3 3 | |
| 308C14-1 | Guide Hold Down Screw | 0 0 | |
| 309C15-5 | Guide Adjustment Screw | 3 3 | |
| 525C1-4 | L.H. & R.H. Guides 1-3/4 Stroke | 1 1 | |
| 525C1-5 | L.H. & R.H. Guides 1-1/2 Stroke | 1 1 | |
| 525C1-6 | L.H. & R.H. Guides 1-1/4 Stroke | 1 1 | |
| 525C1-7 | L.H. & R.H. Guides 1-1/8 Stroke | 1 1 | |
| 531C1-33 | Operating Handle | 1 1 | |
| 531C1-76* | Cushion Grip Handle | 1 | |
| 579C2-17 | Cross Head (With Wrist Pin, Lock Washer & Bolt) | 1 1 | |
| 580C1-100 | Switch - Dual-Speed 3-Phase | 1 1 | |
| 580C1-198 | Switch - Single-Speed 1- & 3-Phase | 1 1 | |
| 580C1-199 | Switch - Dual-Speed 1-Phase | 1 1 | |
| 607C1-36 | Oiling Device | 1 1 | |
| 664C1-6 | Connecting Rod 1-1/8 Stroke | 1 1 | |
| 664C1-5 | Connecting Rod 1-1/4 Stroke | 1 1 | |
| 664C1-4 | Connecting Rod 1-1/2 Stroke | 1 1 | |
| 664C1-3 | Connecting Rod 1-3/4 Stroke | 1 1 | |
| 708C1-4 | Capacitor 110 Volt | 0 1 | |
| 708C1-5 | Capacitor 220 Volt | 0 1 | |
| 708C1-13 | Capacitor 110 Volt | 1 0 | |
| 708C1-18 | Capacitor 220 Volt | 1 0 | |
| 62C1-140 | Handle Bracket | 1 | |
| 71C9-18 | Front Ball Bearing Retainer | 1 | |
| 72C4-26 | Oil Hole Cover | 1 | |
| 85C1-52 | Crank-1-1/8 Stroke | 1 | |
| 85C1-46 | Crank-1-1/4 Stroke | 1 | |
| 85C1-45 | Crank-1-1/2 Stroke | 1 | |
| 85C1-44 | Crank-1-3/4 Stroke | 1 | |
| 91C4-25 | Rivett Crosshead | 2 | |
| 4C1-100 | Lock Nut for Shaft | 1 | |
| 12C1-21 | Shakeproof Washer | 2 | |
| 15C19-23 | Connecting Rod Upper | 2 | |
| 15C19-54 | Stud, Upper R.H. Mounting | 1 | |
| 15C19-59 | Stud, Lower R.H. Mounting | 1 | |
| 18C6-79 | Lock Ring | 1 | |
| 18C6-80 | O-Ring | 2 | |
| 24C1-3 | Screw for Handle Bracket | 1 | |
| 52C5-816 | Switch Plate (Single-Speed) | 1 | |
| 52C5-111 | Switch Plate (Dual-Speed Single-Phase) | 1 | |
| 53C6-2 | Switch Cover | 1 | |
| Wrist Pin Plug | Wrist Pin Plug | 1 | |
| 222C1-7 | Eyelet | 1 | |
| 307C18-1 | Screw | 1 | |
| 309C14-1 | Guide Hold Down Screw | ||
| 531C1-75 | Cushion Grip Handle | 1 | |
| 570C1-1 | Cross Head (With Wrist Pin, Lock Washer & Bolt) | 1 | |
| 607C1-35 | Oiling Device | 1 | |
| 706C1-0 | Capacitor 110 Volt | 1 | |
| 706C1-13 | Capacitor 220 Volt | ||
| 706C1-16 | Capacitor 110 Volt | ||
| 706C1-18 | Capacitor 220 Volt |
Page 9 — Figure 25. Front Bearing Housing with Oiler Assembly (Exploded View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 706C1-4 | |||
| 706C1-5 | |||
| 706C1-13 | |||
| 706C1-18 | |||
| 305C8-1 | |||
| 308C12-1 | |||
| 305C8-1 | |||
| 53C11-91 | |||
| 34C10-142 | |||
| 4C2-110 | |||
| 53C2-111 | |||
| 20C12-62 | |||
| 85C1-52 | |||
| 85C1-48 | |||
| 85C1-45 | |||
| 85C1-44 | |||
| 12C10-2 | |||
| 4C2-91 | |||
| 309C15-5 | |||
| 302C10-4 | |||
| 71C3-18 | |||
| 90C6-38 | |||
| 15C13-23 | |||
| 90C2-162 | |||
| 72C4-28 | |||
| 62C1-140 | |||
| 307C18-1 | |||
| 20C12-79 | |||
| 18C6-80 | |||
| 141C1-48 | |||
| 4C1-111 | |||
| 18C0-79 | |||
| 531C1-53 | |||
| 531C1-76 | |||
| 305C8-1 | |||
| 680C1-100 | |||
| 52C5-194 | |||
| 500C10-4 | |||
| 52C5-235 | |||
| 305C8-1 | |||
| 680C1-198 | |||
| 308C12-1 | |||
| 4C3-8 | |||
| 15C13-34 | |||
| 15C13-39 | |||
| 11C12-92 | |||
| 4C1-190 | |||
| 90C8-65 | |||
| 4C1-132 | |||
| 308C14-1 | |||
| 20C12-122 | |||
| 12C15-14 | |||
| 91C4-25 | |||
| 191C1-21 | |||
| 17C4-6 | |||
| 579C2-17 | |||
| 191C1-38 | |||
| 12C15-53 | |||
| 12C1-24 | |||
| 24C1-3 | |||
| 54C4-32 | |||
| 12C1-21 | |||
| 20C5-17 | |||
| 525C1-7 | |||
| 525C1-6 | |||
| 525C1-5 | |||
| 525C1-4 | |||
| 52C5-236 | |||
| 580C1-129 | |||
| 300C3-2 | |||
| 191C1-47 | |||
| 53C6-2 | |||
| 191C1-43 | |||
| 201C1-11 | |||
| 302C8-2 | |||
| 73C7-203 | |||
| 73C7-204 | |||
| 222C1-7 | |||
| 191C1-45 | |||
| 607C1-35 | |||
| 706C1-6 | 220 Volt | ||
| 305C12-1 | |||
| 65C1-52 | Crank 1 1/8 Stroke | ||
| 65C1-46 | Crank 1 1/4 Stroke | ||
| 65C1-45 | Crank 1 1/2 Stroke | ||
| 65C1-44 | Crank 1 3/4 Stroke | ||
| 9006-38 | |||
| 305C10-4 | |||
| 15C13-33 | |||
| 664C1-6 | 1 1/8 Stroke | ||
| 664C1-5 | 1 1/4 Stroke | ||
| 664C1-4 | 1 1/2 Stroke | ||
| 664C1-3 | 1 3/4 Stroke | ||
| 191C1-32 | |||
| 191C1-36 | |||
| 141C1-46 | |||
| 18C6-79 | |||
| 53C1C1-53 | |||
| 53C1C1-76 | |||
| 680C1-190 | |||
| 191C1-42 | |||
| 191C1-49 | |||
| 300C2-2 | |||
| 680C1-199 |
Page 10 — Figure 26. Sharpener Housing Assembly (Assembled, Front View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 4C1-149 | Nut, Basic | 1 | |
| 4C1-161 | Nut, Self Lock | 1 | |
| 4C2-112 | R.H. Nut for Screw Shaft | 1 | |
| 4C2-113 | L.H. Nut for Screw Shaft | 1 | |
| 5C5-16 | Collar, Lever | 1 | |
| 11C12-54 | Shaft for Cam | 1 | |
| 12C15-57 | Spring Washer for Release Lever | 1 | |
| 12C15-69 | Washer for Lock Bracket | 1 | |
| 12C15-74 | Washer, Flat | 4 | |
| 12C15-91 | Thrust Washer, Upper Nut | 2 | |
| 17C15-106 | Roll Pin for Collar | 1 | |
| 20C4-17 | Pressure Foot Lever Screw | 1 | |
| 20C12-13 | Cam Shaft Spring Screw | 1 | |
| 20C12-113 | Screw for Latch | 1 | |
| 20C12-117 | Screw for Pressure Foot Shoe | 2 | |
| 20C12-156 | Screw for Release Lever | 1 | |
| 20C12-137 | Screw for Knife Guard Lock | 1 | |
| 22C3-2 | Lift Handle for Knife Guard Lock | 1 | |
| 34C1-20 | Tension Spring | 1 | |
| 34C8-12 | Spring for Pressure Foot Lock | 1 | |
| 34C10-179 | Spring for Pressure Foot Lever | 1 | |
| 34C10-107 | Spring for Latch | 1 | |
| 53C11-72 | Cover for Cam | 1 | |
| 53C11-103 | Vinyl Cover for Handle | 1 | |
| 55C4-49 | Spacer for Knife Guard Lock Bracket | 1 | |
| 69C1-192 | Pressure Foot Shoe, All Stitches | 1 | |
| 71C3-15 | Thrust Ball Bearing | 3 | |
| 86C7-34 | Cap for Tube | 1 | |
| 90C8-47 | Bearing for Cam Shaft | 1 | |
| 97C3-38 | Latch for Cam | 1 | |
| 147C1-26 | Extension for Screw Shaft | 1 | |
| 171C1-16 | Lock (Only) for Pressure Foot | 1 | |
| 300C10-1 | Screw, #6-32 x 3/16 Round Head | 2 | |
| 300C10-4 | Screw, #6-32 x 3/8 Round Head | 4 | |
| 302C10-4 | Screw, #6-32 x 5/16 Flat Head | 1 | |
| 302C10-8 | Screw, #6-32 x 3/4 Flat Head | 1 | |
| 309C15-7 | Set Screw for Cam | 1 | |
| 553C1-7 | Pressure Foot Lock Bracket Complete | 1 | |
| 553C1-8 | Pressure Foot Lock Bracket Only | 1 | |
| 605C1-36 | Pressure Foot Rod 7"-8" Knife | 1 | |
| 605C1-37 | Pressure Foot Rod 9"-10" Knife | 1 | |
| 605C1-38 | Pressure Foot Rod 11-1/2" Knife | 1 | |
| 605C1-34 | Pressure Foot Rod 13" Knife | 1 | |
| 611C1-7 | Release Lever With Cam | 1 | |
| 693C1-17 | Pressure Foot Lever | 1 | |
| 713C4-4 | Screw Shaft With Extension, R. & L. Hand Nuts 5"-8" | 1 | |
| 713C4-5 | Screw Shaft With Extension, R. & L. Hand Nuts 9"-10" | 1 | |
| 713C4-6 | Screw Shaft With Extension, R. & L. Hand Nuts 11-1/2" | 1 | |
| 713C4-7 | Screw Shaft With Extension, R. & L. Hand Nuts 13" | 1 | |
| 732C1-11 | Sharpener Housing (With Bushings and Tubes) Only 5"-8" Knife | 1 | |
| 732C1-12 | Sharpener Housing (With Bushings and Tubes) Only 9"-10" Knife | 1 | |
| 732C1-20 | Sharpener Housing (With Bushings and Tubes) Only 11-1/2" Knife | 1 | |
| 732C1-17 | Sharpener Housing (With Bushings and Tubes) Only 13" Knife | 1 | |
| 5C5-14 | Collar, Lower | 1 | |
| 12C15-59 | Washer, Flat | 2 | |
| 12C15-106 | Roll Pin for Collar | 1 | |
| 66C4-19 | Pressure Foot Shoe, All Strokes | 1 | |
| 66C4-48 | Thrust Ball Bearing | 1 | |
| 90C4-47 | Bearing for Cam Shaft | 1 | |
| 97C3-35 | Latch for Cam | 1 | |
| 605C1-35 | Pressure Foot Rod 7'-8' Knife | 1 | |
| 605C1-33 | Pressure Foot Rod 11-1/2' Knife | 1 | |
| 621C1-7 | Release Lever With Cam | 1 | |
| 653C1-17 | Pressure Foot Lever | 1 |
Page 11 — Figure 27. Sharpener Housing Assembly (Exploded, Front View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 66C7-34 | |||
| 4C1-149 | |||
| 12C15-91 | |||
| 71C3-15 | |||
| 12C15-91 | |||
| 4C2-113 | |||
| 12C15-74 | |||
| 71C3-15 | |||
| 12C15-74 | |||
| 4C2-112 | |||
| 12C15-74 | |||
| 71C3-15 | |||
| 12C15-74 | |||
| 300C10-1 | |||
| 22C3-2 | |||
| 20C12-156 | |||
| 621C1-7 | |||
| 12C15-57 | |||
| 309C15-7 | |||
| 97C3-35 | |||
| 34C10-107 | |||
| 20C12-113 | |||
| 90C4-47 | |||
| 11C12-54 | |||
| 34C1-20 | |||
| 20C12-13 | |||
| 147C1-26 | |||
| 71C3-18 | |||
| 17C15-100 | |||
| 732C1-11 | |||
| 732C1-12 | |||
| 732C1-20 | |||
| 732C1-17 | |||
| 605C1-38 | |||
| 605C1-37 | |||
| 605C1-33 | |||
| 605C1-34 | |||
| 553C1-8 | |||
| 553C1-7 | |||
| 20C12-137 | |||
| 171C1-16 | |||
| 4C1-161 | |||
| 55C4-49 | |||
| 34C8-12 | |||
| 12C15-89 | |||
| 302C10-4 | |||
| 300C10-4 | |||
| 53C11-72 | |||
| 302C10-8 | |||
| 20C12-117 | |||
| 683C1-17 | |||
| 53C11-103 | |||
| 34C10-170 | |||
| 20C4-17 | |||
| 68C1-162 | |||
| 86C7-34 | Spacer | ||
| 713C4-4 | Screw Shaft with Extension, R. & L. Hand Nuts 5"-8" | ||
| 713C4-5 | Screw Shaft with Extension, R. & L. Hand Nuts 9"-10" | ||
| 713C4-6 | Screw Shaft with Extension, R. & L. Hand Nuts 11 1/2" | ||
| 713C4-7 | Screw Shaft with Extension, R. & L. Hand Nuts 13" | ||
| 5C5-16 | L.H. | ||
| 97C3-95 | 97C3-95 | ||
| 17C1-16 | 17C1-16 | ||
| 55C1-7 | 55C1-7 | ||
| 34C10-20 | 34C10-20 | ||
| 12C15-69 | 12C15-69 | ||
| 34C10-179 | 5'-13" Knife | ||
| 66C1-192 | 5'-13" Knife All Strokes | ||
| 605C1-36 | 5"-8" Knife |
Page 12 — Figure 28. Sharpener Housing Assembly (Assembled, Rear View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 4C2-2 | Lock Nut for Shaft | 1 | |
| 4C2-65 | R.H. Follower Nut | 1 | |
| 4C2-66 | L.H. Follower Nut | 1 | |
| 11C12-58 | R.H. Square Shaft 5"-6" Knife | 1 | |
| 11C12-59 | R.H. Square Shaft 9"-10" Knife | 1 | |
| 11C12-61 | R.H. Square Shaft 11-1/2" Knife | 1 | |
| 11C12-65 | R.H. Square Shaft 13" Knife | 1 | |
| 11C12-56 | L.H. Square Shaft 5"-6" Knife | 1 | |
| 11C12-57 | L.H. Square Shaft 9"-10" Knife | 1 | |
| 11C12-60 | L.H. Square Shaft 11-1/2" Knife | 1 | |
| 11C12-64 | L.H. Square Shaft 13" Knife | 1 | |
| 11C12-64 | Shaft for Crank | 1 | |
| 12C11-74 | Thrust Washer | 1 | |
| 12C15-22 | Thrust Washer | 2 | |
| 12C16-30 | Thrust Washer for Bottom Plate | 2 | |
| 17C15-78 | Pin for Bell Crank | 1 | |
| 17C15-103 | Roll Pin for Push Rod | 1 | |
| 17C15-113 | Spreader Pin | 1 | |
| 18C0-81 | Retaining Ring for Shaft | 1 | |
| 18C6-25 | Retaining Ring for Bell Crank | 1 | |
| 34C10-89 | Spring for Bell Crank | 1 | |
| 55C4-41 | Spacer for Ball Bearings | 1 | |
| 62C18-131 | Sharpener Housing (Only) | 1 | |
| 65C6-75 | Push Rod | 1 | |
| 71C11-10 | Oil Breather Idler Gear | 1 | |
| 73C7-46 | Tube for Square Shaft 5"-6" Knife | 1 | |
| 73C7-47 | Tube for Square Shaft 9"-10" Knife | 1 | |
| 73C7-88 | Tube for Square Shaft 11-1/2" Knife | 1 | |
| 73C7-89 | Tube for Square Shaft 13" Knife | 1 | |
| 73C7-48 | Tube for Screw Shaft 5"-6" Knife | 1 | |
| 73C7-49 | Tube for Screw Shaft 9"-10" Knife | 1 | |
| 73C7-86 | Tube for Screw Shaft 11-1/2" Knife | 1 | |
| 73C7-87 | Tube for Screw Shaft 13" Knife | 1 | |
| 78C12-163 | Bottom Plate, Sharpener Housing | 1 | |
| 85C3-65 | Bell Crank (Only) | 1 | |
| 87C3-8 | Spiral Gear | 1 | |
| 87C3-44 | Spur Gear | 2 | |
| 87C3-59 | Gear and Shaft | 1 | |
| 90C4-39 | Bearing for Drive Shaft (Lower) | 1 | |
| 90C4-33 | Bearing for Gears | 2 | |
| 90C4-34 | Bearing for Bell Crank | 1 | |
| 90C4-42 | Bearing for Drive Shaft | 1 | |
| 90C4-40 | Bearing for Drive Shaft (Upper) | 1 | |
| 90C4-38 | Bearing for Screw Shaft | 1 | |
| 90C8-24 | Ball Bearing for Crank | 2 | |
| 142C1-7 | Key for Gear | 1 | |
| 191C1-21 | Felt Pad for Cross Head | 1 | |
| 300C7-1 | Screw, M4-36 x 1/8 Round Head | 1 | |
| 300C10-1 | Screw, #8-32 x 3/16 Round Head | 2 | |
| 302C10-6 | Screw, #8-32 x 1/2 Flat Head | 1 | |
| 302C10-3 | Screw, #8-32 x 5/8 Flat Head | 3 | |
| 584C2-3 | Bell Crank with Pin & Bearing (Only) | 1 | |
| 584C3-16 | Bell Crank Complete with Lever | 1 | |
| 602C1-7 | Slow Speed Driver Assembly | 1 | |
| 608C7-9 | Driver Pulley with Driver | 1 | |
| 627C1-10 | Idler Gear & Bushing | 1 | |
| 715C1-12 | Driver Shaft with Gear | 1 | |
| 727C1-6 | Oil Pad & Holder | 1 | |
| 402-85 | Lock Nut for Shaft | 1 | |
| 11C12-63 | R.H. Square Shaft 13' Knife | 1 | |
| 13C16-29 | Thrust Washer | 2 | |
| 13C16-30 | Thrust Washer for Bell Crank | 2 | |
| 18C6-81 | Retaining Ring for Shaft | 1 | |
| 18C6-26 | Retaining Ring for Bell Crank | 1 | |
| 34C10-69 | Spring for Bell Crank | 1 | |
| 55C6-75 | Spacer for Ball Bearings | 1 | |
| 62C16-151 | Sharpener Housing (Only) | 1 | |
| 71C1-10 | Oil Pad & Holder | 1 | |
| 73C7-68 | Tube for Square Shaft 13' Knife | 1 | |
| 73C7-69 | Tube for Screw Shaft 5'-6' Knife | 1 | |
| 73C7-50 | Tube for Screw Shaft 11-1/2' Knife | 1 | |
| 73C7-67 | Tube for Screw Shaft 13' Knife | 1 | |
| 73C7-163 | Bottom Plate, Sharpener Housing | 1 | |
| 85C3-6E | Bell Crank (Only) | 1 | |
| 87C3-63 | Gear and Shaft | 1 | |
| 90C4-29 | Bearing for Drive Shaft (Lower) | 2 | |
| 90C4-46 | Bearing for Drive Shaft (Upper) | 1 | |
| 90C4-58 | Bearing for Screw Shaft | 1 | |
| 90C6-24 | Ball Bearing for Crank | 2 | |
| 602C1-9 | Driver Pulley with Driver | 1 | |
| 627G1-10 | Idler Gear & Bushing | 1 |
Page 13 — Figure 29. Sharpener Housing Assembly (Exploded, Rear View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 4C2-86 | |||
| 4C2-85 | |||
| 62C16-151 | |||
| 4C2-2 | |||
| 191C1-21 | |||
| 71C1-10 | |||
| 300C7-1 | |||
| 300C7-2 | |||
| 11C12-64 | |||
| 627C1-10 | |||
| 87C3-53 | |||
| 584C3-16 | Bell Crank Complete | ||
| 584C2-3 | Bell Crank with Pin & Brg. Only | ||
| 85C3-6 | Bell Crank Only | ||
| 17C15-82 | |||
| 34C10-89 | |||
| 90C4-33 | |||
| 12C11-74 | |||
| 90C4-48 | |||
| 12C15-29 | |||
| 87C3-8 | |||
| 12C15-29 | |||
| 90C4-42 | |||
| 90C4-29 | |||
| 142C1-7 | |||
| 87C3-44 | |||
| 12C15-30 | |||
| 90C4-33 | |||
| 87C3-44 | |||
| 12C15-30 | |||
| 65C6-75 | |||
| 17C15-103 | |||
| 90C4-58 | |||
| 716C1-12 | |||
| 90C4-34 | |||
| 17C15-78 | |||
| 18C6-81 | |||
| 55C4-41 | |||
| 90C6-24 | |||
| 90C6-24 | |||
| 18C5-26 | |||
| 602C1-7 | |||
| 602C1-9 | |||
| 79C12-163 | |||
| 302C10-6 | |||
| 302C12-3 | |||
| 727C1-6 | |||
| 17C15-113 | |||
| 300C10-1 | |||
| 402-86 | LH. | ||
| 402-85 | LH. | ||
| 62016-151 | |||
| 402-2 | |||
| 7101-10 | |||
| 3000C7-1 | |||
| 3000C7-2 | |||
| 70C12-123 | |||
| 11C12-58 | R.H. SQUARE SHAFTS | ||
| 11C12-59 | 5-8 Knife | ||
| 11C12-61 | 6-10 Knife | ||
| 11C12-85 | 11 1/2 Knife | ||
| 73C7-46 | TUBES FOR SQUARE SHAFTS | ||
| 73C7-47 | 5-8 Knife | ||
| 73C7-86 | 9-10 Knife | ||
| 73C7-88 | 11 1/2 Knife | ||
| 73C7-87 | 11 1/2 Knife | ||
| 11C12-56 | L.H. SQUARE SHAFTS | ||
| 11C12-57 | 5-8 Knife | ||
| 11C12-00 | 9-10 Knife | ||
| 143C1-7 | |||
| 50C4-41 | |||
| 18C6-26 | |||
| 67C3-42 | Gear Shaft | ||
| 502C1-7 | Slow-Speed Driver Assy. | ||
| 504C2-1 | Bell Crank | ||
| 110C6-24 | Bearings | ||
| 401-143 | Retainer | ||
| 5504-41 | Spacer for Ball Bearings | ||
| 5504C3-16 | Bell Crank Complete | ||
| 504C2-3 | Bell Crank with Pin & Brg. Only | ||
| 65C3-6 | Bell Crank Only | ||
| 70C12-10-6 | |||
| 1 1/8-1 1/4 | STROKE SIZE | ||
| 73C7-55 | SPACER NUMBER | ||
| 73C7-56 | |||
| 73C7-57 | |||
| 73C7-58 | |||
| 73C7-59 | |||
| 73C7-60 | |||
| 1 1/4-1 3/4 | |||
| 1C13-12 | |||
| 1C13-13 |
Page 14 — Figure 30. Lower Gear Bracket Assembly (Assembled View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 4C1-189 | Jam Nut, #8-32 | 1 | |
| 4C2-83 | Nut for Sharpener Shoe Screw | 2 | |
| 19C15-93 | Washer, Shoe | 4 | |
| 17C16-100 | Roll Pin (For Pulley 152C1-19) | 2 | |
| 20C6-25 | Adjusting Screw | 1 | |
| 20C12-57 | Screw for Sharpener Shoe (Wave Knife Only) | 2 | |
| 20C12-143 | Screw for Clamping Arm | 1 | |
| 20C12-153 | Screw for Sharpener Shoe | 2 | |
| 21C14-14 | Bushing for Sharpener Shoe | 2 | |
| 34C10-45 | Spring for Pulley Slide | 2 | |
| 34C10-47 | L.H. Sharpener Shoe Spring (Wave Knife Only) | 1 | |
| 34C10-67 | R.H. Sharpener Shoe Spring (Wave Knife Only) | 1 | |
| 34C10-133 | Spring for Arm | 1 | |
| 34C10-136 | L.H. Sharpener Shoe Spring | 1 | |
| 34C10-148 | R.H. Sharpener Shoe Spring | 1 | |
| 39C7-28 | Clamping Arm for Shoe | 1 | |
| 53C4-78 | Gear Cover | 1 | |
| 54C4-36 | Oil Hole Plug | 1 | |
| 62C6-31 | Bracket, Lower Gear | 1 | |
| 70C4-32 | Guide Back of Standard | 1 | |
| 79C13-216 | Wear Plate | 2 | |
| 87C3-50 | Gear on Screw Shaft | 1 | |
| 87C5-13 | Intermediate Gear | 1 | |
| 90C4-47 | Bearing for Intermediate Gear | 1 | |
| 90C4-61 | Bearing for Screw Shaft | 1 | |
| 90C4-50 | Bearing for Shaft Extension | 2 | |
| 147C1-28 | R.H. Shaft Extension | 1 | |
| 147C1-29 | L.H. Shaft Extension | 1 | |
| 152C1-19 | Front Pulley for Belt | 2 | |
| 209C1 | Neoprene Band for Pulley | 2 | |
| 300C7-3 | Screw, #4-36 x 1/4 Round Head | 4 | |
| 300C10-2 | Screw, #6-32 x 1/4 Round Head | 2 | |
| 300C10-6 | Screw, #6-32 x 1/2 Round Head | 3 | |
| 301C7-2 | Screw, #4-36 x 3/16 Fillister Head | 2 | |
| 301C10-3 | Screw, #6-32 x 3/8 Fillister Head | 1 | |
| 309C12-2 | Stop Screw, L.H. Shoe | 1 | |
| 712C1 | R.H. Slide with Pulley | 1 | |
| 712C1-1 | L.H. Slide with Pulley | 1 | |
| 715C1-19 | Lower Gear Bracket with Cover, Bolts, Screws & Wear Plate, 5 | 1 | |
| 715C1-23 | Lower Gear Bracket (Complete) | 1 | |
| 729C1-5 | Stabilizer Assembly | 2 | |
| 743C1-26 | R.H. Shoe (Wave Knife Only) | 1 | |
| 743C1-27 | L.H. Shoe (Wave Knife Only) | 1 | |
| 743C1-28 | R.H. Pre-set Sharpener Shoe (Only) | 1 | |
| 743C1-29 | L.H. Pre-set Sharpener Shoe (Only) | 1 | |
| 920C1-7 | L.H. Complete Shoe Assembly | 1 | |
| 920C1-8 | R.H. Complete Shoe Assembly | 1 | |
| 54C10-148 | L.H. Sharpener Shoe Spring | 1 | |
| 34C10-149 | R.H. Sharpener Shoe Spring | 1 | |
| 35C7-28 | Clamping Arm for Shoe | 1 | |
| 63C4-78 | Gear Cover | 1 | |
| 54C4-35 | Oil Hole Plug | 1 | |
| 62C8-31 | Bracket, Lower Gear | 1 | |
| 70C12-216 | Wear Plate | 2 | |
| 8703-60 | Gear on Screw Shaft | 1 | |
| 90C4-59 | Bearing for Screw Shaft | 1 | |
| 300D10-2 | Screw, #8-32 x 1/4 Round Head | 2 | |
| 300D10-6 | Screw, #8-32 x 1/2 Round Head | 2 | |
| 301C7-8 | Screw, #4-36 x 3/16 Filler Head | 2 | |
| 728C1-5 | Lower Gear Bracket (Complete) | 2 | |
| 820C1-7 | L.H. Pre-set Sharpener Shoe (Only) | 1 | |
| 820C1-8 | R.H. Complete Shoe Assembly | 1 | |
| 4C2-63 | Nut for Sharpener Shoe Screw | 2 | |
| 16C15-93 | Washer, Shoe | 2 | |
| 17C15-100 | Roll Pin (For Pulley 152C1-19) | 2 | |
| 34C10-57 | L.H. Sharpener Shoe Spring | 1 | |
| 34C10-123 | Spring for Arm | 1 |
Page 15 — Figure 31. Lower Gear Bracket Assembly (Exploded View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 300C10-2 | |||
| 147C1-29 | |||
| 70C4-32 | |||
| 147C1-28 | |||
| 300C10-6 | |||
| 20C6-25 | |||
| 301C10-3 | |||
| 53C4-78 | |||
| 34C10-123 | |||
| 35C7-28 | |||
| 300C7-3 | |||
| 20C12-143 | |||
| 300C7-3 | |||
| 728C1-5 | |||
| 728C1-5 | |||
| 4C2-63 | |||
| 87C5-13 | |||
| 34C10-45 | |||
| 301C7-2 | |||
| 712C1-1 | |||
| 87C3-50 | |||
| 64C4-35 | |||
| 34C10-45 | |||
| 712C1 | |||
| 62C6-31 | |||
| 715C1-19 | |||
| 79C12-219 | |||
| 620C1-6 | |||
| 12C15-93 | |||
| 743C1-28 | |||
| 21C14-14 | |||
| 12C15-93 | |||
| 34C10-149 | |||
| 20C12-153 | |||
| 90C4-51 | |||
| 90C4-47 | |||
| 90C4-59 | |||
| 152C1-19 | |||
| 17C15-106 | |||
| 17C15-106 | |||
| 209C1 | |||
| 4C1-189 | |||
| 820C1-7 | |||
| 309C12-2 | |||
| 12C15-93 | |||
| 743C1-29 | |||
| 21C14-14 | |||
| 12C15-93 | |||
| 34C10-149 | |||
| 20C12-153 | |||
| 209C1 | |||
| 70C4-52 | BRACKET | ||
| 63C4-78 | BRACKET | ||
| 62C1-6 | BRACKET | ||
| 90C4-61 | BRACKET | ||
| 743C1-26 | BRACKET | ||
| 34C10-148 | SPRING | ||
| 62C1-7 | BRACKET | ||
| 743C1-27 | L.H. SHOE | ||
| 34C10-47 | L.H. SPRING | ||
| 34C10-57 | R.H. SPRING | ||
| 20C12-57 | SCREW (FOR SHOE) | ||
| 35C7-26 | CLAMPING ARM | ||
| 715C1-23 | LOWER GEAR BRACKET ASSEMBLY COMPLETE |
Page 16 — Figure 32. Standard and Baseplate Assembly
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 12C1-36 | Lock Washer, #8 | 4 | |
| 12C15-77 | Washer for Micro Fog Standard | 1 | |
| 17C1-4 | Taper Pin #0 x 3/4 | 2 | |
| 17C8-9 | Hinge Pin | 2 | |
| 20C8-12 | Clamp Screw for Rollers | 8 | |
| 20C12-19 | Knife Slide Screw | 1 | |
| 20C13-51 | Hinge Pin Clamp Screw | 4 | |
| 34C1-57 | Plate Wing Tension Spring | 2 | |
| 65C1-58 | Plate Wing (For Small Plates) | 1 | |
| 60C1-56 | Plate Wing (For Large Plates) | 1 | |
| 79C4-12 | Throat Plates with Screws and Pins | 1 | |
| 79C4-24 | Tapered & Relieved Throat Plates Assembly | 1 | |
| 213C1-1 | Fibre Shim | 6 | |
| 302C12-3 | Screw, #8-32 x 3/8 Flat Head | 3 | |
| 505C3-223 | Small Plate Base Complete (5"-8" Knife) | 1 | |
| 505C3-224 | Large Plate Base Complete (9"-13" Knife) | 1 | |
| 505C3-226 | Small Plate Base Complete (5"-8" Knife) | 1 | |
| 505C3-227 | Large Plate Base Complete (9"-13" Knife) | 1 | |
| 505C3-243 | Small Plate Base Complete (5"-8" Knife) | 1 | |
| 505C3-244 | Large Plate Base Complete (9"-13" Knife) | 1 | |
| 528C1-110 | Micro Fog Standard (Complete with Slides and Throat Plates) 5" Knife | 1 | |
| 528C1-123 | Standard (Complete with Slides and Throat Plates) 5" Knife | 1 | |
| 528C1-120 | Standard (Complete with Slides and Throat Plates) 6" Knife | 1 | |
| 528C1-122 | Standard (Complete with Slides and Throat Plates) 7" Knife | 1 | |
| 528C1-121 | Standard (Complete with Slides and Throat Plates) 8" Knife | 1 | |
| 528C1-115 | Standard (Complete with Slides and Throat Plates) 9" Knife | 1 | |
| 528C1-116 | Standard (Complete with Slides and Throat Plates) 10" Knife | 1 | |
| 528C1-124 | Standard (Complete with Slides and Throat Plates) 11-1/2" Knife | 1 | |
| 528C1-125 | Standard (Complete with Slides and Throat Plates) 13" Knife | 1 | |
| 532C2-3 | Rubber Mounted Roller (Complete) | 4 | |
| 532C2-5 | Rubber Mounted Roller (Complete) | 4 | |
| 532C2-7 | Rubber Mounted Roller (Complete) | 4 | |
| 619C1-31 | Roller Shell (Complete) | 4 | |
| 643C1-44 | Knife Slides (Complete with Screws) 5" Knife | 1 | |
| 643C1-41 | Knife Slides (Complete with Screws) 6" Knife | 1 | |
| 643C1-42 | Knife Slides (Complete with Screws) 7" Knife | 1 | |
| 643C1-43 | Knife Slides (Complete with Screws) 8" Knife | 1 | |
| 643C1-46 | Knife Slides (Complete with Screws) 9" Knife | 1 | |
| 643C1-47 | Knife Slides (Complete with Screws) 10" Knife | 1 | |
| 643C1-53 | Knife Slides (Complete with Screws) 11-1/2" Knife | 1 | |
| 643C1-45 | Knife Slides (Complete with Screws) 13" Knife | 1 | |
| 643C1-51 | Knife Slides (Complete with Screws) 6" Micro Fog | 1 | |
| 619C1-32 | Swivel Roller Assembly | 2 | |
| 1201-56 | Lock Washer, #8 | 4 | |
| 12015-77 | Washer for Micro Fog Standard | 1 | |
| 1701-4 | Tapered Pin 80 x 3/4 | 2 | |
| 1705-9 | Hinge Pin | 2 | |
| 2008-12 | Clamp Screw for Rollers | 1 | |
| 200C12-19 | Knife Slide Screw | 1 | |
| 20013-51 | Hinge Pin Clamp Screw | 4 | |
| 3401-57 | Plate Wing Tension Spring | 2 | |
| 6001-55 | Plate Wing (For Small Plates) | 1 | |
| 6001-56 | Plate Wing (For Large Plates) | 1 | |
| 21301-1 | Fiber Shim | 6 | |
| 302012-3 | Screw, #8-32 x 3/8 Flat Head | 3 | |
| 505C3-225 | Large Plate Base Complete (9'-13' Knife) | 1 | |
| 532C2-1 | Rubber Mounted Roller (Complete) | 4 |
Page 17 — Figure 33. Standard and Baseplate Assembly (Exploded View)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 528C1-112 | |||
| 12C15-77 | |||
| 20C12-19 | |||
| 79C4-12 | |||
| 79C4-24 | |||
| 302C12-3 | |||
| 17C1-4 | |||
| 213C1-1 (2) | 2 | ||
| 17C6-9 | |||
| 213C1-1 | |||
| 213C1-1 | |||
| 34C1-57 | |||
| 619C1-32 | |||
| 619C1-31 | |||
| 20C5-12 | |||
| 20C5-12 | |||
| 12C1-35 | |||
| 20C13-51 | |||
| 528C1-123 | 5" Standard | ||
| 528C1-120 | 6" Standard | ||
| 528C1-122 | 7" Standard | ||
| 528C1-121 | 8" Standard | ||
| 528C1-116 | 9" Standard | ||
| 528C1-124 | 11-1/2" Standard | ||
| 528C1-125 | 13" Standard | ||
| 628C1-112 | Micro Fog | ||
| 643C1-44 | 5" Knife | ||
| 643C1-41 | 6" Knife | ||
| 643C1-42 | 7" Knife | ||
| 643C1-43 | 8" Knife | ||
| 643C1-46 | 9" Knife | ||
| 643C1-47 | 10" Knife | ||
| 643C1-53 | 11-1/2" Knife | ||
| 643C1-45 | 13" Knife | ||
| 643C1-51 | 6" Micro Fog | ||
| 532C2-3 | Rubber Mounted Wide Roller | ||
| 532C2-5 | Rubber Mounted Roller (For All Machines Except Noted Below) | ||
| 532C2-7 | Rubber Mounted Roller (For 50 Cycle 1500 R.P.M. and Dual Speed Machines Only) | ||
| 505C3-223 | Small Plate for 5"-8" Knives | ||
| 505C3-224 | Large Plate for 9"-13" Knives | ||
| 505C3-226 | Small Plate for 5"-8" Knives | ||
| 505C3-227 | Large Plate for 9"-13" Knives | ||
| 505C3-243 | Small Plate for 5"-8" Knives | ||
| 505C3-244 | Large Plate for 9"-13" Knives | ||
| 60C1-55 | For Small Plates | ||
| 60C1-56 | For Large Plates |
Page 18 — Electrical Connections
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1C13-27 | Cord Sleeve | 1 | |
| 20C13-103 | U-Lock Sleeve | 4 | |
| 34C10-170 | Spring | 1 | |
| 47C3-19 | Terminal Sleeve | 1 | |
| 47C3-20 | Terminal Sleeve (current) | 2 | |
| 47C3-21 | Terminal Sleeve (current) | 1 | |
| 50C7-27 | Cord Clamp | 1 | |
| 53C3-19 | Attachment Plug Cover | 1 | |
| 82C1-45 | Attachment Plug Body | 1 | |
| 82C1-46 | Attachment Plug Body | ||
| 82C1-47 | Attachment Plug Body | ||
| 82C1-48 | Attachment Plug Body | ||
| 82C1-49 | Attachment Plug Body | ||
| 91C4-22 | Rivet | 1 | |
| 98C4-37 | Thumb Clip | 1 | |
| 300C8-1 | Screw #4-40 x 3/8 Round Head | ||
| 300C8-2 | Screw #4-40 x 1/2 Round Head | 2 | |
| 302C8-3 | Screw #4-40 x 7/8 Round Head | 1 | |
| 508C1-99 | U-Lock Screw | 4 | |
| 20C13-103 | U-Lock Screw | 4 | |
| 51C1-61 | Terminal Block Bottom | 1 | |
| 51C1-63 | Terminal Block Top | 2 | |
| 302C15-4 | Screw #10-32 x 1-1/8 Flat Head | 2 | |
| 667C1-22 | Terminal Contact w/Pin E | 1 | |
| 667C1-23 | Terminal Contact w/Pin L1,N | 1 | |
| 667C1-24 | Terminal Contact w/Pin L2 | 1 | |
| 667C1-25 | Terminal Contact w/Pin L3 | ||
| 667C1-26 | Terminal Contact w/Pin L1,N | ||
| 667C1-27 | Terminal Contact w/Pin L2 | 1 | |
| 667C1-28 | Terminal Contact w/Pin L3 | 1 | |
| 10-170 | U-Lock Sleeve | 1 | |
| 34C10-10 | Spring | 1 | |
| 30C8-2 | Thumb Clip | 1 | |
| 300C8-3 | Screw #4-40 x 7/8 Round Head | 1 | |
| 302C15-8 | Screw #10-32 x 1-1/8 Flat Head | 1 | |
| 687C1-21 | Terminal Contact w/Pin E | 1 | |
| 687C1-23 | Terminal Contact w/Pin L1,N | 1 | |
| 687C1-24 | Terminal Contact w/Pin L2 | 1 | |
| 687C1-25 | Terminal Contact w/Pin L3 | 1 | |
| 687C1-26 | Terminal Contact w/Pin L1,N | 1 | |
| 687C1-27 | Terminal Contact w/Pin L2 | 1 | |
| 687C1-28 | Terminal Contact w/Pin L3 | 1 |
Eastman 627X / 629X — parts catalog
- Page 1 (cover): This is the cover page for the Eastman Blue Streak II Model 629X and Brute Model 627X parts list. It includes a warning about the sharp knife and contact information for Eastman Machine Company.
- Page 2 (parts_list): This page contains an illustrated parts list for Eastman Straight Knives, detailing components for Motor Assemblies, Front Bearing Housing Assembly, and Sharpener Housing Assembly, along with a list of fasteners required to assemble major components.
- Page 3 (diagram): This page displays an exploded view of the standard and baseplate assembly for an Eastman machine, with callouts for various components and references to other pages for detailed information.
- Page 4 (diagram): This page displays a diagram of a single-phase motor assembly with a corresponding parts list, detailing part numbers, quantities, and descriptions for various components.
- Page 5 (diagram): This page displays an exploded view diagram of a Single/Dual-Phase Motor Assembly, detailing various components and their part numbers, along with a warning about electrical grounding.
- Page 6 (parts_list): Parts list and assembled view for Eastman three-phase motor assemblies (single- and dual-speed), giving part numbers, quantities for Class 457 and Class 556, and descriptions of fan, bearings, cutout, and stator variants.
- Page 7 (diagram): This page displays an exploded view diagram of a three-phase motor assembly, detailing various components and their part numbers, along with a warning about electrical safety and notes on thread direction.
- Page 8 (parts_list): This page contains a parts list for the Eastman Front Bearing Housing (90C2-162) with Oiler Assembly, listing part numbers, descriptions, and quantities for various components.
- Page 9 (diagram): This page displays a diagram of the front bearing housing with an oiler assembly, detailing various components and their part numbers. It also includes notes regarding capacitor usage and safety warnings for electrical components.
- Page 10 (diagram): This page displays a diagram of the Eastman Sharpener Housing Assembly (Front View) and a parts list for models 627 & 629.
- Page 11 (diagram): This page displays a diagram of the Sharpener Housing Assembly (Exploded, Front View) with associated part numbers and descriptions.
- Page 12 (parts_list): This page contains a parts list for the Eastman Sharpener Housing Assembly (Rear View), including part numbers, quantities, and descriptions.
- Page 13 (diagram): This page contains a diagram of the sharpener housing assembly with a parts list and a spacer chart for automatic sharpeners.
- Page 14 (parts_list): This page contains a parts list for the Eastman Lower Gear Bracket Assembly, including part numbers, quantities, and descriptions, along with a diagram and machine stroke information.
- Page 15 (diagram): This page displays a diagram of the lower gear bracket assembly, detailing various components and their part numbers, along with notes on special wave knives and their related parts.
- Page 16 (parts_list): This page lists parts for the Eastman Standard and Baseplate Assembly, including part numbers, quantities, and descriptions. It also features an illustration of the assembly.
- Page 17 (diagram): This page displays diagrams and parts lists for knife slides, standards, and optional components for Eastman machines, including instructions for removing a worn plate roller shell.
- Page 18 (parts_list): This page lists electrical connection parts for Eastman machines, including attachment plugs, terminal blocks, and screws, with part numbers and quantities for various models.