Jack A4F Parts Book (PDF)
Text index — Jack A4F
Page 1 — 1. 机壳、外装部件/Machine Frame & Miscellaneous Cover Components
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 101S11001 | Screw SM3/16"×28 L=9 | 14 |
| 2 | 10122003 | Rubber plug | 2 |
| 3 | 115037001 | Head card | 1 |
| 4 | 115001003 | Face plate asm | 1 |
| 5 | 13813005 | Thread guide left | 1 |
| 6 | 101S11007 | Screw SM11/64"×40 L=6 | 1 |
| 7 | 115022002 | Face plate gasket | 1 |
| 8 | 101S11027 | Screw SM1/8"×44 L=3.4 | 1 |
| 9 | 113812019 | Face oil shield asm | 1 |
| 11412082 | Face oil shield asm (H) | 1 | |
| 10 | 11503002900 | Three switch components | 1 |
| 11 | 101S11004 | Screw SM3/16"×28 L=7 | 3 |
| 12 | 101S11026 | Screw SM15/64"X28 L=9 | 1 |
| 13 | 13812018 | Thread take-up lever cover | 1 |
| 14 | 10122004 | Rubber plug | 1 |
| 15 | 10122005 | Rubber plug | 2 |
| 16 | 13512004 | 3-hole thread guide | 1 |
| 17 | 114S11015 | Screw SM9/64"×40 L=6 | 2 |
| 18 | 11419001 | Knife | 1 |
| 19 | 138S05001 | Screw M3 L=12 | 2 |
| 20 | 13822001 | Rubber plug | 2 |
| 21 | 20722002 | Rubber plug | 1 |
| 22 | 113811004 | Cable band | 3 |
| 23 | 115022001 | Side plate gasket | 1 |
| 24 | 115412006 | Side plate | 1 |
| 25 | 11503007300 | Electronic control asm (Q) | 1 |
| 11543000600 | Electronic control asm(25B) | 1 | |
| 26 | 114S13001 | Screw M5 L=20 | 3 |
| 27 | W01009 | Washer 5 | 2 |
| 28 | 114S30001 | Screw M5×25 | 3 |
| 29 | 11503007400 | Control panel (Q) | 1 |
| 11543000500 | Control panel(25B) | 1 | |
| 30 | 138S08006 | Screw SM3/16"×28 L=7 | 1 |
| 31 | 13810008 | Thread tension post | 1 |
| 32 | 13812066 | Thread tension guide plate | 1 |
| 33 | 14112017 | Thread tension disk | 2 |
| 34 | 11227001 | Thread tension spring | 1 |
| 35 | 141S16019 | Thread tension nut | 1 |
| 36 | 1411300400 | Thread tension asm | 1 |
| 37 | 1411300300 | Thread tension asm | 1 |
| 1411300500 | Thread tension asm (H) | 1 | |
| 38 | 141S16013 | Thread tension nut | 1 |
| 39 | 10112007 | Thread disk rotating stopper | 1 |
| 40 | 10127002 | Thread tension spring A | 1 |
| 11427050 | Thread tension spring A (H) | 1 | |
| 41 | 14112016 | Disk stopper | 1 |
| 42 | 14112015 | Thread tension disk | 2 |
| 43 | 141S30001 | Thread tension post | 1 |
| 44 | 10127001 | Thread take-up spring | 1 |
| 10127031 | Thread take-up spring (H) | 1 | |
| 45 | 10103011 | Thread tension base | 1 |
| 46 | 10122014 | Rubber ring | 1 |
| 47 | 101S15005 | Screw SM9/64"x40 L=5.5 | 1 |
| 48 | 11326012 | Tension release pin | 1 |
| 10126002 | Tension release pin (H) | 1 | |
| 49 | 207S14007 | Screw M4 L=6 | 1 |
| 50 | 1023000200 | Nest less e-device | 1 |
| 51 | 101S12001 | Machine head stud | 4 |
| 52 | 101S11019 | Screw SM3/32"x56 L=2 | 2 |
| 53 | 10127009 | Slide plate spring | 1 |
| 54 | 10115002 | Slide plate | 1 |
| 55 | 13815011 | Needle plate | 1 |
| 11315001 | Needle plate (H) | 1 | |
| 10815001 | Needle plate (-7) | 1 | |
| 56 | 104S17002 | Screw SM11/64"×40 L=6.5 | 2 |
| 57 | 13812019 | Ruler stop seat | 1 |
| 58 | 101S11002 | Screw SM11/64"x40 L=5.5 | 1 |
| 59 | 11413011 | Thread guide | 1 |
| 60 | 401S16001 | Nut SM9/64"x40 | 1 |
| 61 | 101S15010 | Screw SM15/64"×28 L=10.5 | 1 |
| 62 | 10113004 | Thread guide right | 1 |
| 63 | 101S11007 | Screw SM11/64"×40 L=6 | 1 |
| 64 | 10122110 | Rubber plug | 1 |
| 11412019 |
Page 2 — 2.上轴、挑线部件/Main Shaft & Thread Take-up Components
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 11326013 | Thread take-up connecting rod | 1 |
| 10126001 | Thread take-up connecting rod pin(H、H-M) | 1 | |
| 2 | 101S15001 | Screw SM15/64"x28 L=15 | 1 |
| 3 | 10105001 | Thread take-up connecting rod | 1 |
| 4 | 10112003 | Needle bar crank protecting plate | 1 |
| 5 | 1013800100 | Thread take-up lever asm | 1 |
| 1133800200 | Thread take-up lever asm (H) | 1 | |
| 6 | 10124001 | Needle bearing | 2 |
| 7 | 1011000100 | Thread take-up crank | 1 |
| 11310000 | Thread take-up crank (H-M) | 1 | |
| 1011000400 | Thread take-up crank (H) | 1 | |
| 8 | 10105002 | Needle bar connecting rod | 1 |
| 9 | 101S17001 | Screw SM9/64"×40 (left hand) L=4.8 | 1 |
| 10 | 101S15004 | Screw SM9/32"x28 L=16 | 1 |
| 11 | 101S11003 | Screw SM9/32"x28 L=16 | 1 |
| 12 | 113804014 | Needle bar crank | 1 |
| 115404010 | Needle bar crank (H) | 1 | |
| 13 | 101S15002 | Screw SM1/4"x40 L=6 | 2 |
| 14 | 11380302600 | Main shaft bushing front | 1 |
| 1140300200 | Main shaft bushing front (H) | 1 | |
| 15 | 101S15006 | Screw SM15/64"x28 L=7 | 1 |
| 16 | 12203002 | Main shaft bushing mid | 1 |
| 17 | 101S14001 | Screw SM1/4" ×40 L=6 | 4 |
| 18 | 10108001 | Main shaft thrust collar | 2 |
| 19 | H03002 | Snap ring 20 | 1 |
| 20 | 400092 | Feed eccentric cam | 1 |
| 400811 | Feed eccentric cam (H、-7、-HL) | 1 | |
| 400006 | Feed eccentric cam (H-M) | 1 | |
| 21 | 10112017 | Cover plate | 1 |
| 10812002 | Cover plate (H、-7、-HL) | 1 | |
| 22 | 101S11013 | Screw SM1/4"x40 L=13 | 2 |
| 207S11018 | Screw M5 L=10 | 2 | |
| 23 | 113S11003 | Screw SM9/64"x40 L=5 | 2 |
| 24 | 13803002 | The rear axle sleeve | 1 |
| 25 | 10122105 | Oil seal | 1 |
| 26 | H03001 | Snap ring 15 | 1 |
| 27 | 10202002 | Main shaft | 1 |
| 28 | S10013 | Screw M6 L=6 | 2 |
| 29 | 10208001 | Motor dust jacket | 1 |
| 30 | 302830 | Handwheel | 1 |
| 31 | S10009 | Screw M6 L=8 | 2 |
| 32 | 110233015 | Motor | 1 |
| 33 | 95111049 | Motor cover asm | 1 |
| 34 | S09022 | Screw M3 L=4 | 2 |
| 35 | 95100116 | Motor grating sensor asm | 1 |
| 36 | S09113 | Screw M6 L=6 | 2 |
| 37 | 195100324 | Motor rotor | 1 |
| 38 | 195100323 | Motor stator | 1 |
| 39 | 95211058 | Motor insulation shield | 1 |
| 40 | W02058 | Spring washer 5 | 3 |
| 41 | 951S15010 | Screw M5 L=20 | 3 |
| 42 | 114S13001 | Screw M5 L=20 | 1 |
| 43 | 951S15016 | Screw asm M3 L=28 | 4 |
| 44 | 10122012 | Rubber plug | 1 |
| 45 | 115012007 | Oil shield | 1 |
| 46 | 14123001 | Oil cotton | 1 |
| 10105004 | |||
| 113802600 | 上轴前 the组件(厚料) | ||
| 400081 | 送料偏心轮(厚料、7、-HL) |
Page 3 — 3. 针杆、竖轴、下轴部件/Needle bar & Upright Shaft & Hook Driving Shaft Components 4. 压料、自动抬脚部件/Presser Bar & Auto Lifter Components (1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 10122013 | Rubber plug | 1 |
| 2 | 14103009 | Needle bar bushing upper | 1 |
| 10103009 | Needle bar bushing upper (H) | 1 | |
| 3 | 11402039 | Needle bar | 1 |
| 10102021 | Needle bar (H) | 1 | |
| 4 | 10138002 | Needle bar connecting rod | 1 |
| 5 | 101S11005 | Screw SM9/64"x40 L=6 | 1 |
| 6 | 10103010 | Needle bar bushing lower | 1 |
| 11303023 | Needle bar bushing lower (H) | 1 | |
| 7 | 10113002 | Needle bar thread guide | 1 |
| 11412063 | Needle bar thread guide (H) | 1 | |
| 8 | 10117001 | Needle DB×1 #14 | 1 |
| 10117002 | Needle DP×5 #21(H) | 1 | |
| 9 | 10413001 | Lower bushing thread guide | 1 |
| 10113009 | Lower bushing thread guide (H) | 1 | |
| 10 | 104S11006 | Screw SM1/8"x44 L=4.5 | 1 |
| 11 | 10109001 | Slide block | 1 |
| 12 | 101S11008 | Screw SM11/64"x40 L=8 | 2 |
| 13 | 10109002 | Needle bar guide | 1 |
| 14 | 10425004 | Upper shaft bevel gear | 1 |
| 15 | 10425003 | Upper small bevel gear asm | 1 |
| 16 | 10425002 | lower large bevel gear asm | 1 |
| 17 | 101S15014 | Screw SM1/4"x40 L=7 | 2 |
| 18 | 10425001 | Hook drive shaft bevel gear | 1 |
| 19 | 101S15014 | Screw SM1/4"x40 L=7 | 2 |
| 20 | 101S15014 | Screw SM1/4"x40 L=7 | 2 |
| 21 | 101S15014 | Screw SM1/4"x40 L=7 | 2 |
| 22 | 113S11036 | Screw SM15/64"x28 L=4.7 | 1 |
| 23 | 113803012 | Upright shaft bushing upper | 1 |
| 24 | 115002008 | Upright shaft | 1 |
| 25 | 10403013 | Upright shaft bushing lower | 1 |
| 26 | 113803014 | Hook driving shaft bushing back | 1 |
| 27 | 115008002 | Hook driving shaft snap ring | 1 |
| 28 | 115003001 | Lower shaft middle bushing | 1 |
| 29 | 13802061 | Hook driving shaft | 1 |
| 30 | 11303001 | Hook driving shaft bushing front | 1 |
| 31 | 13823001 | Oil wick | 1 |
| 32 | 101S30005 | set screw | 1 |
| 33 | 11418003 | Hook asm (Hirose) | 1 |
| 11418004 | Hook asm (Hirose) (H) | 1 | |
| 34 | 10118003 | Bobbin | 1 |
| 35 | 11218504 | Bobbin case asm | 1 |
| 36 | 10112016 | Finger postioner | 1 |
| 10112032 | Finger postioner (H) | 1 | |
| 37 | 116S11005 | Screw SM11/64"×40 L=13 | 1 |
| 38 | 101S11012 | Screw SM11/64"×40 L=4.8 | 2 |
| 39 | 113S14020 | Screw SM11/64"×40 L=6 | 1 |
| 1 | 101S11010 | Screw SM9/64"x40 L=11 | 1 |
| 2 | 10128002 | Washer | 1 |
| 3 | 13811029 | Hand lifter | 1 |
| 4 | O01004 | Rubber ring | 1 |
| 5 | 1381000200 | Hand lifter cam asm. | 1 |
| 6 | 101S20001 | Screw | 2 |
| 7 | 10128015 | Washer | 2 |
| 8 | 1381203000 | Lift front lever component | 1 |
| 9 | 10112013 | Knee lifter pull rod | 1 |
| 10 | H05003 | Snap ring 5 | 2 |
| 11 | 11329020 | Snap ring 5 | 5 |
| 12 | 10112010 | Lifting plate | 1 |
| 13 | 101S20004 | Hinge Screw SM3/16"x32 | 1 |
| 14 | 101S20003 | Hinge screw SM15/64"x28 | 1 |
| 15 | 144S20003 | Hinge Screw SM3/16"x32 | 1 |
| 16 | 115412002 | Knee lifter back lever | 1 |
| 17 | 10111005 | Knee lifter connecting rod | 1 |
| 18 | 11212009 | Wire release bracket upper | 1 |
| 19 | 101S11004 | Screw SM3/16"×28 L=7 | 1 |
| 20 | 11212008 | Wire release press plate | 1 |
| 21 | 113S11004 | Screw M4 L=8 | 1 |
| 22 | 11427009 | Reset spring | 1 |
| 23 | 1381203200 | Knee lifter lever asm | 1 |
| 24 | 1141206000 | Wire release plate asm | 1 |
| 25 | 101S20002 | Wire release plate pin | 1 |
| 26 | 10128015 | Washer | 1 |
| 27 | 10126003 | Thread release supporting pin | 1 |
| 28 | H05012 | Snap ring 4 | 1 |
| 29 | 10128001 | washer | 1 |
| 30 | 10127003 | Spring | 1 |
| 31 | 10112022 | Tube press plate | 1 |
| 32 | 113S11004 | Screw M4 L=8 | 1 |
| 33 | 11212008 | Wire presser | 1 |
| 34 | 115012003 | Wire release bracket lower | 1 |
| 35 | W02004 | Spring washer | 1 |
| 36 | 116S30003 | Screw SM15/64"x28 L=14.5 | 1 |
| 37 | 113S12001 | Nut SM3/16"x32 | 2 |
| 38 | 11381101800 | Presser regulating screw nut asm | 1 |
| 39 | 1138NS30003 | Press regulating screw (H) | 1 |
| 40 | 1138NS16005 | Press regulating nut (H) | 1 |
| 41 | 10102003 | Press regulating guide bar | 1 |
| 42 | 113827010 | Press regulating spring | 1 |
| 113S15036 | 螺钉SM15/64"x28 L=4.7 | ||
| 0010004 | |||
| 115S11004 | 螺钉SM3/16"x28 L=7 | ||
| W020004 |
Page 4 — 4. 压料、自动抬压脚部件/Presser Bar & Auto Lifter Components (2)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 43 | 13809030 | Presser bar guide bracket | 1 |
| 44 | 101S15007 | Screw SM1/4"x40 L=8 | 1 |
| 45 | 10122112 | Pressure bar oil cover | 1 |
| 46 | 113803007 | Presser bar bushing,lower | 1 |
| 47 | 10102004 | Presser bar | 1 |
| 48 | 101S11009 | Screw SM9/64"x40 L=10.5 | 1 |
| 49 | 1131600600 | Presser foot asm | 1 |
| 1131600300 | Presser foot asm (H) | 1 | |
| 1 | 115033006 | Stepper motor | 1 |
| 115433002 | Stepper motor (H、-7) | 1 | |
| 2 | 114922002 | Stepper motor bushing oil seal | 1 |
| 3 | 114903001 | Stepper motor bushing | 1 |
| 4 | 115410001 | Needle pitch cam | 1 |
| 115410003 | Needle pitch cam (-7) | 1 | |
| 5 | S10028 | Screw M5 L=6 | 2 |
| 6 | 114926001 | Needel gage crank pin | 1 |
| 7 | 114S16004 | Nut SM11/64"x40 | 1 |
| 8 | 115426001 | Needl gage crank pin | 1 |
| 9 | 115405001 | Needle pitch adjusting link | 1 |
| 10 | 114S30007 | Spring mounting screw | 1 |
| 12 | 115427001 | Pitch reset spring | 1 |
| 115427003 | Pitch reset spring (-7) | 1 | |
| 13 | 20628023 | Oil proof plug | 1 |
| 14 | 138S08006 | Screw SM3/16"x28 L=7 | 1 |
| 15 | 115426003 | Pitch crank support pin | 1 |
| 16 | 136S20003 | Roller screw | 1 |
| 17 | 13609002 | Roller | 1 |
| 18 | 115404003 | Needl gage crank pin | 1 |
| 19 | 101S11005 | Screw SM9/64''×40 L=6 | 4 |
| 20 | 101S11023 | Feed regulator shaft end screw | 1 |
| 21 | 136S17005 | Roller nut | 1 |
| 22 | 10126010 | Right pin | 1 |
| 23 | 114901001 | Feed shaking plate | 1 |
| 24 | 10126007 | Connecting pin | 2 |
| 25 | 10109005 | Feed short shaking plate | 2 |
| 13809007 | Feed short shaking plate (H) | 2 | |
| 11412022 | Feed short shaking plate (-7) | 2 | |
| 26 | 10109004 | Feed long shaking plate | 2 |
| 13809008 | Feed long shaking plate (H、-7) | 2 | |
| 27 | 10126009 | Left pin | 1 |
| 28 | 101S15010 | Screw SM15/64"x28 L=10.5 | 1 |
| 29 | 101S14001 | Screw SM1/4''×40 L=6 | 1 |
| 30 | 113S14010 | Screw SM15/64"x28 L=12 | 1 |
| 31 | 10126011 | Feed rocker crank pin | 1 |
| 32 | 10104002 | Feed rocker crank | 1 |
| 33 | 101S11016 | Screw SM3/16"x28 L=14 | 3 |
| 34 | 101S20005 | hinge Screw SM9/32"x28 | 1 |
| 35 | 115405003 | Connecting rod | 1 |
| 36 | 115405002 | Rocker shaft connecting rod | 1 |
| 115405004 | Rocker shaft connecting rod (H、-7) | 1 | |
| 37 | 10126006 | Connecting rod pin | 1 |
| 38 | 101S16003 | Hinge Screw SM9/32"x28 | 1 |
| 39 | 10104004 | Feed driving shaft crank | 1 |
| 40 | 13802001 | Feed driving shaft | 1 |
| 41 | 10108003 | Feed rocker shaft snap ring | 2 |
| 42 | 101S15002 | Screw SM1/4"x40 L=6 | 4 |
| 43 | 10403015 | Bushing | 2 |
| 44 | H03001 | Snap ring 15 | 2 |
| 45 | 113804011 | Driving shaft crank | 1 |
| 46 | 1138NS30004 | Screw SM11/64"x40 L=10.5 | 1 |
| 47 | 400672 | Feed bar asm | 1 |
| 11380700300 | Feed bar asm (H、-7) | 1 | |
| 48 | 10128003 | Washer | 1 |
| 49 | 480095 | Feed bar bed | 1 |
| 50 | 10401007 | Feed bar pin | 1 |
| 51 | 101S11025 | Screw SM11/64"x40 L=7 | 1 |
| 52 | 13814005 | Feed dog | 1 |
| 11314001 | Feed dog (H) | 1 | |
| 11414001 | Feed dog (-7) | 1 | |
| 53 | 101S11018 | Screw SM1/8''x44 L=6 | 2 |
| 54 | 1150NS13002 | Screw SM3/16"x28 L=10 | 4 |
| 55 | 10122003 | Rubber plug | 1 |
| 56 | 10102008 | Feed rocker shaft | 1 |
| 57 | 13812081 | Spring fixing plate | 1 |
| 58 | 101S11005 | Screw SM9/64"x40 L=6 | 2 |
| 115416004 | 螺母SM11/64"x40 | ||
| 115430007 | |||
| 138508006 | 螺钉SM3/16"x28 L=7 | ||
| 115405005 | |||
| 1138070300 | |||
| 11501025 | 螺钉SM11/64"x40 L=7 |
Page 5 — 6. 切线装置部件/Thread Trimmer Components 7. 润滑部件/Oil Lubrication Components(1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 113S15002 | Screw SM1/8"x44 L=9.5 | 1 |
| 2 | 115019001 | Secant knife | 1 |
| 3 | 113S17001 | Screw SM9/64×40 L=6 | 1 |
| 4 | 113813029 | Needle guard patch | 1 |
| 5 | 201S11009 | Screw SM9/64"x40 L=5.5 | 1 |
| 6 | 113S11001 | Screw SM11/64"x40 L=12 | 2 |
| 7 | 10128003 | Washer | 2 |
| 8 | 1381203100 | Knife bracket press component | 1 |
| 9 | 13812031 | Knife bracket press | 1 |
| 10 | 13803012 | Short bushing | 2 |
| 11 | 113S17002 | Screw SM11/64"x40 L=4.4 | 2 |
| 12 | 14019004 | Motorial knife | 1 |
| 12 | 11319003 | Motorial knife (H) | 1 |
| 13 | 11307001 | Knife bracket | 1 |
| 14 | 113S20001 | Screw SM11/64×40 L=6.5 | 2 |
| 15 | 11312005 | Connecting rod | 1 |
| 16 | 114S16004 | Nut SM11/64"x40 | 1 |
| 17 | 11304001 | Crank | 1 |
| 18 | 113822014 | Crank driver stopper block | 1 |
| 19 | S05004 | Screw M5 L=14 | 1 |
| 20 | 11327001 | Spring | 1 |
| 21 | 11230004 | Plug | 1 |
| 22 | 11230005 | Pin | 1 |
| 23 | 11303003 | Thread cutting shaft bushing | 1 |
| 24 | 11503005 | Crank drive shaft bushing | 1 |
| 25 | 113S14020 | Screw SM11/64"x40 L=6 | 1 |
| 26 | 11322002 | Spring cover | 1 |
| 27 | 11327002 | Spring | 1 |
| 28 | 11304002 | Crank shaft | 1 |
| 29 | 101S14001 | Screw SM1/4''×40 L=6 | 1 |
| 30 | 116S14005 | Screw SM1/4"x40 L=10 | 2 |
| 31 | 11309030 | Push rod | 2 |
| 32 | 11310004 | Cam | 1 |
| 32 | 11310011 | Cam (H) | 1 |
| 33 | 11324001 | Roolling pin | 1 |
| 34 | 1138NS16007 | Nut SM11/64"x40 | 1 |
| 35 | 1130400500 | Thread trimmer drive asm | 1 |
| 36 | 11302002 | Shaft | 1 |
| 37 | 11322001 | Positioning block | 1 |
| 38 | H05013 | Snap ring 6 | 1 |
| 39 | 10112003 | Cunter weight protecting | 1 |
| 40 | 11322003 | Solenoid cushion rubber | 1 |
| 41 | 11309001 | Solenoid pin | 1 |
| 42 | 101S11026 | Screw SM15/64"x28 L=9 | 1 |
| 43 | 11312006 | Solenoid bracket | 1 |
| 44 | N01005 | Nut M4 | 2 |
| 45 | W02018 | Washer 4 | 2 |
| 46 | 112S16006 | Nut SM1/4"X40 | 1 |
| 47 | 113822005 | Washer | 1 |
| 48 | 1383003300 | Thread trimmer solenoid asm. | 1 |
| 49 | 11327003 | Spring | 1 |
| 50 | 115012004 | Thread release bed | 1 |
| 51 | 113S20002 | Screw SM1/4×28 L=13 | 1 |
| 1 | 10111004 | Oil sight window | 1 |
| 2 | 10122019 | Rubber ring | 1 |
| 3 | 14121001 | Main shaft oil tube | 1 |
| 4 | 101S30008 | Oil pump connecting stud | 1 |
| 5 | 10121001 | Hook oil tube | 1 |
| 6 | 10112020 | Oil pump installing base | 1 |
| 7 | W03002 | Spring washer 5 | 1 |
| 8 | 209S12001 | Screw SM11/64"×40 L=10.5 | 1 |
| 9 | 10103022 | Oil pump bushing | 1 |
| 10 | 101S30007 | Plunger Screw | 1 |
| 11 | 10127013 | Plunger spring | 1 |
| 12 | 10122018 | Plunger | 1 |
| 13 | 10120001 | Oil pump | 1 |
| 14 | S04093 | Screw M3 L=6 | 3 |
| 15 | 10111003 | Oil pump impeller | 1 |
| 16 | 10112021 | Oil pump impeller cover | 1 |
| 17 | 10111007 | Lubricating oil pump cover | 1 |
| 18 | 101S30006 | Screw ST2.9 L=10 | 3 |
Page 6 — 7. 润滑部件/Oil Lubrication Components(2)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 116S30003 | 螺钉SM15/64"x28 L=14.5 | ||
| 10136001 | |||
| W020004 | GB/T93-1987垫圈M6 | ||
| 13821015 | |||
| 11312031 | |||
| 13827014 | |||
| 113S30001 | 螺钉SM11/64"x40 L=19 | ||
| 10423005 | |||
| 10127015 | |||
| 10123006 | |||
| 101S11004 | 螺钉SM3/16"x28 L=7 | ||
| 10112023 | |||
| 11502100100 | |||
| 115021002 | |||
| 10112025 | |||
| 101S11010 | 螺钉SM9/64"x40 L=11 | ||
| 10123010 | |||
| 1150NS20001 | |||
| 136S17005 | |||
| 115412001 | |||
| 115404002 | |||
| 115426002 | |||
| S10014 | 螺钉M5 L=4 | ||
| S10028 | 螺钉M5 L=6(进口) | ||
| 115410002 | |||
| 13609002 | |||
| 136S20003 | |||
| 115401001 | |||
| 1150NS13002 | 螺钉SM3/16"x28 L=10 | ||
| 115022007 | |||
| 13801020 | |||
| 10111005 | |||
| 10122020 | |||
| 10122021 | O型圈 | ||
| 101S11028 | 螺钉SM5/16"x24 L=7 | ||
| 10131001 | |||
| 115022008 | |||
| 10112027 | |||
| 10127016 | |||
| H05010 | Snap ring 9 | ||
| 10102011 | |||
| 101S15012 | 螺钉M6 L=30 | ||
| 101S16004 | 螺钉M6 L=4 | ||
| 101S12002 | 螺钉M6 L=26 |
Page 7 — 10. 绕线部件/ Winding Components
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 1383103900 | Bobbin winder asm | 1 |
| 2 | 114S11008 | Screw M4 L=6 | 1 |
| 3 | W01142 | Washer 4 | 1 |
| 4 | 10113030 | Thread press control plate | 1 |
| 5 | 10111120 | Winding pad | 1 |
| 6 | 13831101 | Bobbin winder bed | 1 |
| 7 | H05006 | Snap ring 5 | 1 |
| 8 | 10127061 | Spring | 1 |
| 9 | 13812110 | Regulating plate | 1 |
| 10 | 10110030 | Bobbin winder cam | 1 |
| 11 | S09045 | Screw M5 L=5 | 1 |
| 12 | 1380510600 | Bobbin winder connecting rod | 1 |
| 13 | 13827103 | spring | 1 |
| 14 | 10127060 | Spring | 1 |
| 15 | GB/T 896-1986 | Snap ring 4 | 1 |
| 16 | 13802111 | Bobbin winder mian shaft | 1 |
| 17 | 13802026 | Bobbin winder cam shaft | 1 |
| 18 | S09103 | Screw M4 L=4 | 2 |
| 19 | 13831102 | Bobbin winder wheel | 1 |
| 20 | 001110 | Ring | 1 |
| 21 | 11422062 | Washer | 1 |
| 22 | 114S11003 | Screw SM3/16"×28 L=10 | 3 |
| 23 | 1411300600 | Bobbin thread tension asm | 1 |
| 24 | 141S16019 | Thread tension nut | 1 |
| 25 | 11427006 | Spring | 1 |
| 26 | 14112015 | Thread tension disk | 2 |
| 27 | 11413022 | Thread tension guide plate | 1 |
| 28 | 112S13004 | Screw | 1 |
| 29 | 114S16001 | Nut SM11/64"×40 | 1 |
| 30 | 11435013 | Driving wheel | 1 |
| 31 | S10009 | Screw M6 L=8 | 2 |
| 1 | 20131019 | Spool rest rod rubber cap | 1 |
| 2 | S04050 | Screw M5 L=16 | 3 |
| 3 | W01047 | Washer M5 | 2 |
| 4 | N01034 | Nut M5 | 4 |
| 5 | 13831022 | Spool rest arm upper | 1 |
| 6 | 10113011 | Thread guide ring | 2 |
| 7 | 10113010 | Thread guide ring | 2 |
| 8 | 13831019 | Spool rest rod upper | 1 |
| 9 | 13831021 | Spool rest rod joint | 1 |
| 10 | 13831020 | Spool rest rod lower | 1 |
| 11 | 10122106 | Spool rest rod rubber ring | 2 |
| 12 | W01052 | Washer M16 | 2 |
| 13 | N02008 | Spool rest rod nut M16 | 1 |
| 14 | S04051 | Spool rest arm lower screw M5 L=31.6 | 1 |
| 15 | N01034 | Nut M5 | 2 |
| 16 | W03002 | Spring washer 5 | 2 |
| 17 | 13831023 | Spool rest arm lower | 1 |
| 18 | 13831024 | Spool rest | 2 |
| 19 | 20131010 | Spool rest cushion | 2 |
| 20 | 20131006 | Spool pin | 2 |
| 21 | 13831025 | Spool retainer | 2 |
| 22 | 1383100300 | Thread stand asm. | 1 |
| 1 | 1011203100 | Hinge component | 2 |
| 2 | 10122060 | Head connecting rubber cushion | 2 |
| 3 | 10117001 | Needle DB×1 #14 | 4 |
| 3 | 10117002 | Needle DP×5 #21(H) | 4 |
| 4 | 101S30010 | Nail P19 | 6 |
| 5 | 10118003 | Bobbin | 2 |
| 5 | 10818501 | Big Bobbin (-L) | 2 |
| 6 | 115011003 | Machine head rest pin | 1 |
| 7 | 20731047 | Screw driver (large) | 1 |
| 8 | 10131003 | Screw driver (medium) | 1 |
| 9 | 10131004 | Screw driver (small ) | 1 |
| 10 | 113831011 | Drying agent(25g) | 1 |
| 11 | 110211011 | Oil bag(400ml) | 1 |
| 101530010 | 机针座钉P19 |
Jack A4F — parts catalog
- Page 1 (parts_list): This page lists machine frame and miscellaneous cover components for the JACK A4F Series sewing machine, including part numbers, descriptions, and quantities.
- Page 2 (parts_list): This page lists and describes components for the main shaft and thread take-up, including part numbers, descriptions, and quantities.
- Page 3 (parts_list): This page lists components for the Needle bar & Upright Shaft & Hook Driving Shaft and Presser Bar & Auto Lifter, including part numbers, names, descriptions, quantities, and references.
- Page 4 (diagram): This page contains a diagram of the Presser Bar & Auto Lifter Components and Feed Mechanism Components, with numbered parts corresponding to tables on other pages.
- Page 5 (parts_list): This page lists and illustrates thread trimmer components and oil lubrication components, including part numbers, descriptions, and quantities.
- Page 6 (parts_list): This page lists oil lubrication components, stepping auto lifter components, and oil reservoir & knee lifter components with their part numbers and descriptions.
- Page 7 (parts_list): This page lists winding components, thread stand components, and machine head accessories (1) and (2) with their part numbers, descriptions, and quantities.
- Page 8 (cover): This page is the cover of the JINTECH industrial sewing machine parts catalog, featuring the company name, product type, and contact information.