Juki LK-1900A Parts Book (PDF)
Text index — Juki LK-1900A
Page 7 — 1. FRAME & MISCELLANEOUS COVER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06475 | MOTOR COVER | 1 |
| 2 | SM-5040855-SN | SCREW | 4 |
| 3 | 400-06478 | UPSIDE COVER | 1 |
| 4 | SM-4061255-SP | SCREW M6 L=12 | 6 |
| 5 | 400-10404 | PROTECTION_PLATE | 1 |
| 6 | SM-4050855-SP | SCREW | 3 |
| 7 | 400-06487 | BED COVER LEFT | 1 |
| 8 | 400-06488 | BED COVER RIGHT | 1 |
| 9 | SM-6040650-TP | SCREW M4 L=6 | 5 |
| 10 | 400-06481 | FACE COVER | 1 |
| 11 | 229-02506 | FACE PLATE | 1 |
| 12 | SM-4041055-SP | SCREW | 2 |
| 13 | 400-10405 | CRANK_ROD_COVER | 1 |
| 14 | SM-5040855-SN | SCREW | 4 |
| 15 | 138-16855 | CYLINDER ARM CAP | 1 |
| 16 | 135-08700 | HOOK COVER PRESSER SPRING PIN | 1 |
| 17 | 135-08809 | HOOK COVER PRESSER SPRING A | 1 |
| 18 | 135-08908 | HOOK COVER PRESSER SPRING B | 1 |
| 19 | SM-5040855-SN | SCREW | 1 |
| 20 | SM-6041150-TP | SCREW M4 L=11 | 3 |
| 21 | B2707-761-000 | HINGE STUD | 2 |
| 22 | SM-8060612-TP | SCREW M6 L=6 | 4 |
| 23 | 141-13468 | BOBBIN THREAD TENSION ASM. | 1 |
| 24 | 141-13450 | BOBBIN THREAD TENSION ROD ASM. | (1) |
| 25 | B3126-012-000 | THREAD TENSION DISK | (2) |
| 26 | D7133-555-B00 | CONNECTING ROD SPRING | (1) |
| 27 | 110-72402 | THREAD TENSION NUT | (1) |
| 28 | NS-6110310-SP | NUT 11/64-40 | (1) |
| 29 | 138-16608 | BALANCE COVER | 1 |
| 30 | SM-4030855-SN | SCREW M3 L=8.0 | 2 |
| 31 | 400-10414 | THREAD_GUIDE_NO.1 | 1 |
| 32 | SM-4061255-SP | SCREW M6 L=12 | 1 |
| 33 | B1111-232-000 | THREAD GUIDE PLATE | 1 |
| 34 | SM-4061255-SP | SCREW M6 L=12 | 1 |
| 35 | 400-10571 | L_SHAPED_THREAD_GUIDE_A | 1 |
| 36 | NM-6040000-SN | NUT M4 | 1 |
| 37 | 229-20508 | ARM THREAD GUIDE A | 1 |
| 38 | SM-6040650-TP | SCREW M4 L=6 | 1 |
| 39 | 137-05108 | TAKE-UP THREAD GUIDE B | 1 |
| 40 | SM-6040860-TP | SCREW M4 L=8 | 1 |
| 41 | B1129-210-000 | FRAME THREAD GUIDE (B) | 1 |
| 42 | SM-6040860-TP | SCREW M4 L=8 | 1 |
| 43 | CM-3002000-02 | CAUTION LABEL(25) | 1 |
| 44 | SM-4030601-SN | SCREW M3 X 6 | 1 |
| 45 | CM-3012000-01 | SAFETY LABEL_S | 1 |
| 46 | 105-02300 | THREAD CUTTER | 1 |
| 47 | 100-04109 | GROUND MARK | 1 |
| 48 | TA-0750704-RO | RUBBER PLUG | 2 |
| 49 | TA-0850604-RO | RUBBER PLUG | 2 |
| 50 | TA-1050504-RO | RUBBER PLUG | 6 |
| 51 | TA-1250406-RO | RUBBER PLUG D=12.5 L=4 | 1 |
| 52 | TA-1270502-RO | RUBBER PLUG | 1 |
| 53 | TA-1470704-RO | RUBBER PLUG | 1 |
| 54 | TA-1550902-RO | PLUG | 2 |
| 55 | TA-2100904-RO | RUBBER PLUG | 3 |
| 56 | 262-60000 | BOBBIN WINDER UNIT | 1 |
| 57 | RC-0560711-KP | RETAINING RING | (1) |
| 58 | RE-0400000-KO | E-RING 4 | (1) |
| 59 | 262-60802 | BTW BEARING SPACER | (1) |
| 60 | 262-61602 | BOBBIN SPRING | (1) |
| 61 | 262-61701 | BTW SPRING | (1) |
| 62 | 262-60109 | BTW BASE | (1) |
| 63 | 262-60208 | BTW CAM PLATE | (1) |
| 64 | 262-60901 | BTW SHAFT | (1) |
| 65 | 262-61008 | BTW LEVER SHAFT | (1) |
| 66 | 262-61107 | BTW LEVER | (1) |
| 67 | SM-5040655-SN | SCREW | (1) |
| 68 | WP-0450826-SC | WASHER 4.5X10X0.8 | (1) |
| 69 | 262-60307 | BTW BASE SHAFT | (1) |
| 70 | 262-61305 | BTW BEARING | (2) |
| 71 | 262-60406 | BTW SHAFT BASE | (1) |
| 72 | 262-61206 | BTW SPACER | (1) |
| 73 | 262-60505 | BTW CAM LEVER | (1) |
| 74 | SM-8050502-TP | SCREW M5 L=5 | (1) |
| 75 | 262-60604 | BTW WHEEL | (1) |
| 76 | SM-8040802-TP | SCREW M4X8 | (2) |
| 77 | 262-60703 | BTW TORSION SPRING | (1) |
| 78 | 262-61503 | BTW WHEEL RUBBER | (1) |
| 79 | 400-11928 | CRANK ROD UNDER COVER | 1 |
| 80 | SM-5040855-SN | SCREW | 3 |
| 81 | 229-01409 | NEEDLE BAR UPPER BUSH CAP | 1 |
| 82 | CM-1001000-01 | OIL INJECTION PROHIBITION LABEL | 1 |
Page 9 — 2. MAIM SHAFT & NEEDLE BAR COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-10572 | MAIN SHAFT | 1 |
| 2 | 400-10415 | BEARING_BUSH_A_ASM. | 2 |
| 3 | 400-10416 | BEARING_BUSH_A | (2) |
| 4 | SM-8060812-TP | SCREW M6 L=8 | (4) |
| 4 | SB-8060812-TP | SCREW M6 L=8 | (4) |
| 5 | SB-1200018-00 | BEARING | 1 |
| 6 | SB-1200018-00 | BEARING | 1 |
| 7 | SB-1200017-00 | BEARING | 1 |
| 8 | 400-10418 | BEARING_BUSH_B_ASM. | 1 |
| 9 | 400-10419 | BEARING_BUSH_B | (1) |
| 10 | SM-8060812-TP | SCREW M6 L=8 | (2) |
| 11 | 400-31136 | CRANK_ROD_ALL_ASM. | 1 |
| 12 | 400-10421 | CRANK_ROD_SUPPORT_PLATE | (1) |
| 13 | SM-1030601-SP | SCREW M3 L=6 | (3) |
| 14 | TA-0670604-RO | PLUG D=6.7 L=6 | (2) |
| 15 | 101-08009 | OIL SEAL | (2) |
| 16 | 400-06561 | OSCILLATOR | (1) |
| 17 | 400-26818 | WASHER | (1) |
| 18 | SM-8480652-TP | SCREW | (2) |
| 19 | RE-0800000-KO | E-SHAPED SNAP RING (8MM) | (1) |
| 20 | SM-6060550-TP | SCREW M6 L=4.5 | (1) |
| 21 | 400-06529 | THREAD TAKE UP COMPL. | 1 |
| 22 | 400-06530 | THREAD TAKE UP LEVER ASM. | (1) |
| 23 | SB-1080022-00 | BEARING | (2) |
| 24 | SB-1040016-00 | BEARING | (1) |
| 25 | 400-06531 | THREAD TAKE UP LEVER | (1) |
| 26 | B1908-505-000 | THREAD PASS BUSH | (1) |
| 27 | 400-06534 | NEEDLE BAR CRANK ROD ASM. | (1) |
| 28 | 228-91006 | NEEDLE BAR CRANK ROD METAL | (1) |
| 29 | 400-06535 | NEEDLE BAR CRANK ROD | (1) |
| 30 | SB-1080023-00 | BEARING | (1) |
| 31 | B1903-552-000 | LEFT SCREW | (1) |
| 32 | 400-06532 | THREAD TAKE UP CRANK | (1) |
| 33 | 400-06537 | NEEDLE ROD CRANK | (1) |
| 34 | 228-91204 | BEARING SUPPORT | 2 |
| 35 | SB-3070002-0A | BEARING | 2 |
| 36 | SB-3070002-0B | BEARING | 2 |
| 37 | SB-3070002-0C | BEARING | 2 |
| 38 | SB-3070002-0D | BEARING | 2 |
| 39 | 400-10434 | THRUST_COLLAR_ASM. | 1 |
| 40 | 400-10435 | THRUST_COLLAR | (1) |
| 41 | 400-10436 | THRUST_COLLAR_SCREW | (2) |
| 42 | 400-10533 | BTW_DRIVING_WHEEL_ASM. | 1 |
| 42 | 400-10532 | BTW DRIVING WHEEL ASM. | 1 |
| 43 | 400-10534 | BTW_DRIVING_WHEEL | (1) |
| 44 | 400-10533 | BTW_DRIVING_WHEEL_ASM. | (2) |
| 45 | 400-10423 | COUNTER_WEIGHT | 1 |
| 46 | 400-06517 | COUNTER_WEIGHT SCREW A | 1 |
| 46 | 400-06518 | COUNTER WEIGHT SCREW A | 1 |
| 47 | SM-6081252-TP | BOLT M8 L=12 | 1 |
| 48 | SM-8480652-TP | SCREW M6X0.75 L=6 | 1 |
| 49 | SM-6061200-SP | SCREW | 1 |
| 50 | WP-0820516-SP | WASHER 11.6X8.2X0.6 | 1 |
| 51 | 400-11902 | THREAD_TAKE_UP_CRANK_SHAFT | 1 |
| 52 | 400-10437 | CRANK_BALANCER_ASM. | 1 |
| 53 | 400-10439 | CRANK_BALANCER_FIX_PLATE | (1) |
| 54 | 400-10440 | CRANK_BALANCER_FIX_PLATE_SCREW | (2) |
| 55 | 400-28015 | AC SERVO MOTOR | (1) |
| 56 | SL-6052592-TN | BOLT | 4 |
| 57 | 236-04309 | COUPLING | 1 |
| 58 | SM-8060812-TP | SCREW M6 L=8 | 4 |
| 59 | B1212-210-D00 | PULLEY | 1 |
| 60 | B1144-210-000 | REVOLVING DIRECTION LABEL | 1 |
| 61 | 265-00306 | HAND PULLEY SHAFT | 1 |
| 62 | PS-0400142-KH | SPRING PIN 4X14 | 1 |
| 63 | A1230-500-00A | SET-SCREW | 1 |
| 64 | GAF-01007000 | SPRING | 1 |
| 64 | GAP-01007000 | SPRING | 1 |
| 65 | 400-06515 | GEAR A | 1 |
| 66 | SM-8040310-SS | SCREW M4 L=3 | 2 |
| 67 | 400-06516 | GEAR B | 1 |
| 68 | SM-8040310-SS | SCREW M4 L=3 | 2 |
| 69 | 400-10573 | NEEDLE BAR | 1 |
| 70 | B1411-552-000 | NEEDLE BAR CLAMP | 1 |
| 71 | SS-6090670-TP | SCREW 9/64-40 L=6 | 1 |
| 72 | B1414-555-000 | SLIDE BLOCK | 1 |
| 73 | 400-10441 | NEEDLE ROD METAL | 1 |
| 74 | 400-10442 | NEEDLE ROD LOWER METAL | 1 |
| 75 | 400-10574 | THREAD_GUIDE | 1 |
| 76 | D1405-L7A-M00 | NEEDLE BAR THREAD GUIDE | 1 |
| 77 | MDP-500B1100 | NEEDLE DPX5 #11 | 1 |
| 78 | MDP-500B1400 | NEEDLE DPX5 #14 | 1 |
| 79 | MDP-170B2100 | NEEDLE DPX17 #21 | 1 |
| 80 | SM-7030550-TP | SCREW M3 L=4.5 | 1 |
| 81 | SM-8480652-TP | SCREW M6X0.75 L=6 | 3 |
| 82 | SM-8060812-TP | SCREW M6 L=8 | 2 |
| 83 | 400-28015 | AC SERVO MOTOR | 1 |
| 84 | SM-6061250-TP | SCREW M6 L=12 | 2 |
Page 11 — 3. PRESSER LIFTER & WIPER COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-29903 | PRESSER LIFTING MOTOR | 1 |
| 2 | SM-4051655-SP | SCREW M5 L=16 | 4 |
| 3 | SB-1100024-00 | BEARING | 1 |
| 4 | SM-6040802-TP | SCREW M4X0.7 L=8 | 1 |
| 5 | 235-17501 | NEEDLE CAM ROLLER A | 1 |
| 6 | 400-40256 | CAM ROLLER SHAFT | 1 |
| 7 | NM-6040001-SP | NUT M4X0.7 | 2 |
| 8 | 400-06661 | LIFTER LINK A ASM. | 1 |
| 9 | 400-06716 | THREAD TRIMMER SHAFT | 1 |
| 10 | SM-8060812-TP | SCREW M6 L=8 | 1 |
| 11 | 400-23831 | SPRING_RACK | 1 |
| 12 | SM-4040855-SP | SCREW | 1 |
| 13 | 135-15606 | SPRING | 1 |
| 14 | 400-06666 | SENSOR SLIT ASM. | 1 |
| 15 | SM-8050402-TP | SCREW | 2 |
| 16 | 400-10443 | SENSOR_INSTALLING_BASE | 1 |
| 17 | SM-6040802-TP | SCREW M4X0.7 L=8 | 1 |
| 18 | HD-0005700-0A | PHOTO SENSOR | 1 |
| 19 | SL-4031291-SC | SCREW M3X12 | 1 |
| 19 | SL-4031201-SC | SCREW M3X12 | 1 |
| 20 | 400-06665 | LIFTER LINK B | 1 |
| 21 | SD-0800327-TP | HINGE SCREW D=8 H=3.2 | 1 |
| 22 | NM-6050001-SP | NUT M5 | 1 |
| 23 | SD-0700406-TP | HINGE SCREW D=7 H=4 | 1 |
| 24 | 400-06671 | CONNECTING ARM | 1 |
| 25 | SM-6061802-TP | SCREW M6 L=18 | 1 |
| 26 | 265-00405 | CONNECTING SHAFT | 1 |
| 27 | 400-08693 | LOWERING ARM | 1 |
| 28 | SM-6061802-TP | SCREW M6 L=18 | 1 |
| 29 | SD-0790606-TP | HINGE SCREW D=7.94 H=6 | 1 |
| 30 | NM-6060001-CP | NUT M6 | 1 |
| 31 | 400-06672 | LOWERING FOOT | 1 |
| 32 | 141-04400 | CONNECTING LINK | 1 |
| 33 | SD-1000406-TP | HINGE SCREW D=10 H=4 | 2 |
| 34 | 400-06674 | WIPER CONNECTING LINK | 1 |
| 35 | SD-0600206-TP | HINGE SCREW D=6 H=2 | 1 |
| 36 | 135-09708 | SPRING | 1 |
| 37 | 400-10451 | WIPER_CONNECTING_ARM_ASM | 1 |
| 38 | RC-0470611-KP | RETAINING RING 4.7 | 2 |
| 39 | 400-10455 | WIPER_CONNECTING_LINK_SHAFT | 1 |
| 40 | 400-10457 | WIPER_STOPPER | 1 |
| 41 | 400-10458 | WIPER_CONNECTING_PLATE | 1 |
| 42 | 400-17202 | WIPER C ASM. | 1 |
| 43 | NM-6060003-SC | NUT M6 | 1 |
| 44 | RC-0470611-KP | RETAINING RING 4.7 | 1 |
| 45 | SD-0640216-TP | HINGE SCREW D=6.35 H=2.1 | 1 |
| 46 | 400-06678 | WIPER BASE PLATE | 1 |
| 47 | SM-4040855-SP | SCREW | 1 |
| 48 | WP-0450801-SP | WASHER | 1 |
| 49 | WP-0450801-SP | WASHER | 1 |
| 50 | WP-0480856-SP | WASHER 4.8X8.4X0.8 | 1 |
Page 13 — 4. SHUTTLE DRIVER SHAFT COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | HX-0015000-0D | CABLE CLIP | 1 |
| 2 | 400-12127 | OIL_PIPE_HOLDER | 1 |
| 3 | SM-6040602-TP | SCREW M4 L=6 | 1 |
| 4 | 400-13721 | TUBE_CLAMP | 1 |
| 5 | SL-4040891-SC | SCREW M4 L=8 | 1 |
| 6 | 400-10464 | THRUST COLLAR ASM. | 1 |
| 7 | 400-10467 | THRUST COLLAR | (1) |
| 8 | 400-10469 | THRUST COLLAR SCREW | (1) |
| 9 | SB-1100024-00 | BEARING | 3 |
| 10 | 400-16077 | LOWER SHAFT GEAR ASM. | 1 |
| 11 | 400-06563 | OSCILLATOR SHAFT | 1 |
| 12 | SM-8060612-TP | SCREW M6 L=6 | 2 |
| 13 | 400-10575 | LOWER SHAFT | 1 |
| 14 | EA-9500B01-00 | CABLE BAND | 2 |
| 15 | 400-06578 | OIL WICK PRESSER | 1 |
| 16 | SM-8060610-TP | SCREW M6 L=6 | 1 |
| 17 | SM-8060812-TP | SCREW M6 L=8 | 2 |
| 18 | 400-06573 | SHUTTLE ASM. | 1 |
| 19 | 400-06574 | SHUTTLE | (1) |
| 20 | B1820-210-D00 | SHUTTLE OIL FELT,A | (2) |
| 21 | B1821-210-D00 | SHUTTLE OIL FELT,B | (1) |
| 22 | B1822-210-D00 | INNER HOOK PRESSER SPRING | (2) |
| 23 | RE-0300000-K0 | E-RING 3 | (2) |
| 24 | 265-01858 | INNER HOOK PRESSER ASM. | (1) |
| 25 | 141-04004 | ONCE THROUGH OIL FELT PRESSER | (1) |
| 26 | SM-6020460-TP | SCREW M2 L=3.5 | (2) |
| 27 | 141-03907 | SHUTTLE ONCE THROUGH OIL FELT | (1) |
| 28 | 400-06577 | SHUTTLE LUBRICATING PLATE | (1) |
| 29 | SM-4030455-SP | SCREW M3 L=4 | (2) |
| 30 | CQ-2000000-00 | OIL WICK | (2.6) |
| 32 | 236-30007 | TUBE | (1) |
| 34 | 135-29607 | SHUTTLE PACKING | (2) |
| 35 | 400-10471 | SHUTTLE RACE ADJUSTING SHAFT | 1 |
| 36 | SM-6040650-TP | SCREW M4 L=6 | 2 |
| 37 | 400-06575 | SHUTTLE BEARING RING | 2 |
| 38 | 400-06576 | SHUTTLE OIL SEAL | 2 |
| 39 | SB-3080010-0A | BEARING | 2 |
| 40 | SB-3080010-0B | BEARING | 2 |
| 41 | SB-3080010-0C | BEARING | 2 |
| 42 | SB-3080010-0D | BEARING | 2 |
| 43 | B1815-210-000 | INNER HOOK UPPER SPRING | 1 |
| 45 | 141-03353 | INNER HOOK PRESSER ASM., A | 1 |
| 46 | 141-03352 | INNER HOOK PRESSER ASM., B | 1 |
| 47 | 141-03659 | SHUTTLE RACE RING ASM., C | 1 |
| 48 | 400-11512 | DRIVER ASM. | 1 |
| 49 | 400-14963 | SHUTTLE DRIVER ASM. | 1 |
| 50 | SS-6121212-TP | SCREW 3/16-28 L=12 | (1) |
| 51 | 400-11511 | SHUTTLE DRIVER | (1) |
| 52 | 400-10879 | SHUTTLE DRIVER | (1) |
| 53 | B1828-980-0BB | BOBBIN CASE ASM. (RACING PREVE | 1 |
| 54 | 138-12102 | BOBBIN | 1 |
| 55 | 400-10473 | LOWER SHAFT GEAR COVER ASM. | 1 |
| 56 | 400-10474 | LOWER SHAFT GEAR COVER | (1) |
| 57 | 400-10475 | LOWER SHAFT GEAR FELT | (1) |
| 58 | WP-0450801-SP | WASHER | 2 |
| 59 | SM-5040855-SN | SCREW | 2 |
| 61 | HX-0015000-0B | CABLE CLIP | 2 |
| 64 | 400-06840 | RUBBER BUSH | 2 |
| 65 | 400-06836 | OIL TANK ASM. | 1 |
| 66 | 400-06580 | SHUTTLE | 1 |
| 67 | 400-06581 | SHUTTLE (H) | 1 |
| 68 | 400-14965 | BOBBIN CASE ASM. | 1 |
| 69 | B1828-210-DAA | BOBBIN | 1 |
| 70 | B1806-210-D00 | SHUTTLE ASM.SCREW | 1 |
| 71 | 400-10470 | SCREW | 1 |
| 72 | SM-8061050-TP | SCREW M6 L=10 | 1 |
Page 15 — 5. THREAD TENSION COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06628 | AT SOLENOID | 1 |
| 2 | SM-6040602-TP | SCREW M4 L=6 | 4 |
| 3 | RE-0900000-K0 | E-RING 9 | 1 |
| 4 | 400-06625 | SPRING | 1 |
| 5 | 400-06617 | AT SOL PIN | 1 |
| 6 | 400-10477 | AT_SOL_COLLAR | 1 |
| 7 | SM-8030412-TP | SCREW | 2 |
| 8 | 400-10479 | AT_PLATE | 1 |
| 9 | SM-6040802-TN | SCREW | 2 |
| 10 | WP-0430801-SC | WASHER 4.3X9X0.8 | 2 |
| 11 | 400-10482 | AT_DRIVE_LINK(F)_ASM | 1 |
| 12 | 400-10492 | AT_DRIVE_LINK(R)_ASM | 1 |
| 13 | 400-10495 | AT_PIVOT_BASE(R) | 1 |
| 14 | SM-6040602-TP | SCREW M4 L=6 | 2 |
| 15 | 400-10486 | AT_PIVOT_BASE(F) | 1 |
| 16 | SM-6041050-TP | SCREW M4 L=10 | 2 |
| 17 | 400-10487 | AT_PIVOT_SCREW | 2 |
| 18 | NM-6040003-SC | NUT M4 | 2 |
| 19 | WP-0400516-UZ | PLAIN WASHER | 3 |
| 20 | 400-10490 | AT_PIVOT_BEARING | 2 |
| 21 | 400-10497 | AT_JOINT | 2 |
| 22 | WP-0400516-UZ | PLAIN WASHER | 2 |
| 23 | 400-10498 | AT_JOINT_BEARING | 2 |
| 24 | NM-6030003-SC | NUT M3 | 2 |
| 25 | 400-10500 | AT_CONNECTION_BAR | 1 |
| 26 | 400-06622 | AT SNAP PIN | 2 |
| 27 | 400-10503 | THREAD_TENSION_1_ASM | 1 |
| 28 | 400-10504 | THREAD_TENSION_SHAFT | (1) |
| 29 | 229-28808 | NUT | (1) |
| 30 | 229-21506 | THREAD TENSION DISK | (2) |
| 31 | 262-18602 | FIRST_THREAD_TENSION_SPRING | (1) |
| 32 | 400-10508 | THREAD_TENSION_2_ASM | 1 |
| 33 | 400-10510 | THREAD_TENSION_POST_BASE | (1) |
| 34 | 400-10511 | DISK_STOPPER_HOLDER_CAP | (1) |
| 35 | 400-10512 | THREAD_TENSION_SHAFT_COLLAR | (1) |
| 36 | 400-10513 | DISK_STOPPER_SP | (3) |
| 37 | 400-10514 | DISK_STOPPER | (1) |
| 38 | 400-10515 | ASSY_THREAD_TENSION_POST | (1) |
| 39 | 400-10478 | AT_SOL_COLLAR_SCREW | (1) |
| 40 | 229-21605 | THREAD TAKE-UP SPRING | (1) |
| 41 | 400-10521 | HOLD_CAP_SCREW | (3) |
| 42 | 400-10522 | SHAFT_NUT | (1) |
| 43 | 400-10523 | POST_BASE_C_RING | (1) |
| 44 | 400-10509 | THREAD_TENSION_SHAFT | (1) |
| 45 | 400-13967 | AT-FELT | 1 |
| 46 | SL-4040681-SC | COMBINATION SCREW M4 X 8 | 1 |
| 47 | SM-8061612-TP | SCREW M6X16 | 1 |
Page 17 — 6. THREAD TRIMMER MECHANISM COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06711 | THREAD TRIMMER CAM | 1 |
| 2 | SM-8050592-TP | SCREW | 2 |
| 3 | WP-0450801-SP | WASHER | 1 |
| 4 | 400-40256 | CAM ROLLER SHAFT | 1 |
| 5 | NM-6040001-SP | NUT M4X0.7 | 2 |
| 6 | 400-06712 | THREAD TRIMMER LINK ASM. | 1 |
| 7 | SD-0800327-TP | HINGE SCREW D=8 H=3.2 | 1 |
| 8 | NM-6050001-SP | NUT M5 | 1 |
| 9 | 400-06716 | THREAD TRIMMER SHAFT | 1 |
| 10 | SM-8060812-TP | SCREW M6 L=8 | 1 |
| 11 | 400-06717 | CONNECTING BAR | 1 |
| 12 | 400-10525 | THREAD_TRIMMER_SENSOR_SLIT | 1 |
| 13 | SM-6040802-TP | SCREW M4X0.7 L=8 | 1 |
| 14 | HD-0022300-00 | PHOTO SENSOR | 1 |
| 15 | SL-4041291-SC | SCREW M4 L=12 | 1 |
| 16 | 400-10526 | THREAD_TRIMMER_SENSOR_BASE | 1 |
| 17 | SM-4040855-SP | SCREW | 2 |
| 18 | 400-06722 | NEEDLE PLATE ASM.,A | 1 |
| 19 | 400-06723 | NEEDLE PLATE ASM.,H | 1 |
| 20 | 400-06724 | NEEDLE PLATE ASM.,E | 1 |
| 21 | B2417-280-000 | THREAD CUTTER LEVER SHAFT | (1) |
| 22 | B2426-280-000 | NEEDLE HOLE GUIDE | (1) |
| 23 | 141-09607 | NEEDLE HOLE GUIDE | (1) |
| 24 | D2426-282-C00 | NEEDLE HOLE GUIDE | (1) |
| 25 | SS-1060210-TP | SCREW 3/32-56 L=2.2 | (2) |
| 26 | 400-06721 | NEEDLE PLATE | (1) |
| 27 | B2424-280-000 | FIXING KNIFE | (1) |
| 28 | SS-7090410-SP | SCREW 9/64-40 L= 3.5 | (2) |
| 29 | B2418-280-000 | MOVING KNIFE LINK | (1) |
| 30 | B2416-280-000 | THREAD CUTTING LEVER RING | (1) |
| 31 | B2415-280-0A0 | THREAD CUTTER LEVER ASM.,SMALL | (1) |
| 32 | B2414-280-0A0 | THREAD CUTTER LEVER ASM.,LARGE | (1) |
| 33 | SS-6110430-TP | SCREW 11/64-40 L= 4.0 | (1) |
| 34 | WP-0450846-SP | WASHER | (1) |
| 35 | SS-7110740-TP | SCREW 11/64-40 L=7 | (1) |
| 36 | B2423-280-00C | MOVING KNIFE WASHER C | (1) |
| 37 | B2423-280-00A | MOVING KNIFE WASHER A | (1) |
| 38 | B2423-280-00B | MOVING KNIFE WASHER B | (1) |
| 39 | B2423-280-00D | MOVING KNIFE WASHER D | (1) |
| 40 | B2423-280-00E | MOVING KNIFE WASHER E | (1) |
| 41 | B2421-280-0A0 | MOVING KNIFE ASM. | (1) |
| 42 | SD-0500091-TP | HINGE SCREW D= 5.0 H= 0.9 | (1) |
| 43 | SM-1040650-TP | SCREW M4 L=6 | 4 |
| 44 | 263-15606 | NEEDLE CAM ROLLER A | 1 |
| 45 | 263-15705 | NEEDLE CAM ROLLER B | 1 |
| 46 | 263-15804 | NEEDLE CAM ROLLER C | 1 |
| 47 | 263-15903 | NEEDLE CAM ROLLER D | 1 |
Page 19
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-29901 | X FEED MOTOR | 1 |
| 2 | SM-4041655-SP | SCREW M4 L=16 | 4 |
| 3 | 265-01403 | X FEED GEAR | 1 |
| 4 | SM-8060602-TP | SCREW M6X6 | 2 |
| 5 | 400-29902 | Y FEED MOTOR | 1 |
| 45 | B2557-280-00A | WASHER FOR DRIVING ARM | 2 |
| 46 | B1414-232-00A | CRANK SLIDE BLOCK | 1 |
| 47 | B1414-232-00B | GUIDE ROLLER | 1 |
| 57 | SS-7110740-TP | SCREW 11/64-40 L=7 | 1 |
| 58 | 135-33104 | FINGER GUARD | 1 |
| 59 | 135-48300 | FINGER GUARD | 1 |
| 61 | 135-18600 | WORK CLAMP FOOT, RIGHT | 1 |
| 62 | 135-18709 | WORK CLAMP FOOT, LEFT | 1 |
| 63 | 135-48102 | WORK CLAMP FOOT, RIGHT | 1 |
| 64 | 135-48201 | WORK CLAMP FOOT, LEFT | 1 |
| 65 | 135-42915 | WORK CLAMP FOOT, RIGHT | 1 |
| 66 | 135-43012 | WORK CLAMP FOOT, LEFT | 1 |
| 73 | 141-16107 | FEED PLATE A | 1 |
| 74 | 141-16206 | FEED PLATE B | 1 |
| 75 | 135-54803 | FEED PLATE | 1 |
| 76 | 141-16800 | FEED PLATE H | 1 |
| 77 | 141-16404 | FEED PLATE D | 1 |
| SM-6041150-TP | SCREW M4 L=11 | 2 | |
| 400-10536 | Y FEED MOTOR BASE | 1 | |
| 265-01502 | Y FEED GEAR | 1 | |
| 400-06736 | CLOTH FEED ARM | 1 | |
| 135-16208 | FEED DRIVING ARM SHAFT | 1 | |
| SM-8060812-TP | SCREW M6 L=8 | 1 | |
| 262-23305 | SLIDE BLOCK STUD | 1 | |
| B1414-232-000 | SQUARE BLOCK | 1 | |
| 400-06738 | Y FEED SHAFT | 1 | |
| B2509-704-000 | BUSHING, REAR | 2 | |
| 265-00009 | Y FEED ARM | 1 | |
| SS-8660612-TP | SCREW 1/4-40 L=6 | 2 | |
| 135-17404 | HINGE STUD | 1 | |
| 400-06740 | CLOTH FEED SUPPORT PLAE | 1 | |
| SM-6040650-TP | SCREW M4 L=6 | 3 | |
| 400-06737 | CLOTH FEED PLATE | 1 | |
| 400-06739 | CLOTH FEED PRESSER PLATE | 1 | |
| SM-1040650-TP | SCREW M4 L=6 | 4 | |
| HD-002250A-00 | PHOTO SENSOR | 1 | |
| SL-4041281-SC | SCREW M4X0.7 L=12 | 1 | |
| 141-11702 | SENSOR INSTALLING BASE | 1 | |
| SM-4040855-SP | SCREW | 2 | |
| 141-11504 | CROSSFEED SENSOR SLIT | 1 | |
| HD-0005700-0A | PHOTO SENSOR | 1 | |
| SL-4031291-SC | SCREW M3X0.5 L=12 | 1 | |
| 141-11801 | SENSOR INSTALLING BASE | 1 | |
| 141-36402 | LENGTHWISE FEED SENSOR SLIT | 1 | |
| SS-6110480-SP | SCREW 11/64-40 L=4.3 | 1 | |
| 400-39255 | SUPPORT PLATE | 1 | |
| SM-4040802-TP | SCREW M4X0.7 L=8 | 2 | |
| 400-39013 | FEED BRACKET B | 1 | |
| B2549-280-000 | WORK CLAMP FOOT MOUNTING BASE | 7 | |
| B2548-280-000 | BALL RETAINER | 1 | |
| SS-8150510-TP | SCREW 15/64-28 L=4.7 | 1 | |
| CS-0800881-TP | THRUST COLLAR | 2 | |
| SM-8050512-TP | SCREW M5 L=5 | 4 | |
| WP-0450801-SP | WASHER | 4 | |
| 262-04008 | LIFTING LEVER RIGHT | 1 | |
| 262-04107 | LIFTING LEVER LEFT | 1 | |
| 141-05407 | CLOTH PRESSER SPRING | 2 | |
| 135-18501 | SPRING SUSPENSION | 1 | |
| 135-18808 | WORK CLAMP FOOT FACE PLATE | 1 | |
| SS-2110930-SP | SCREW 11/64-40 L=8.7 | 4 | |
| SS-8080310-TP | SCREW 1/8-44 L=2.8 | 2 | |
| 400-06745 | LEVER DRIVING PLATE L ASM. | 1 | |
| 400-06747 | LEVER DRIVING PLATE R ASM. | 1 | |
| SM-6061802-TP | SCREW M6 L=18 | 1 | |
| WP-0621016-SD | WASHER 6.2X13X1 | 1 | |
| 400-10570 | HIDDEN PLATE | 1 | |
| SM-5030501-SC | SCREW M3 L=5 | 2 | |
| SM-3061052-TP | SCREW M6 L=10 | 1 | |
| 400-39012 | LIFTING LEVER SHAFT B | 1 | |
| SM-4042055-SP | SCREW M4 L=20 | 2 |
Page 21 — 8. TC CLAMP COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06761 | TC CLAMP | 1 |
| 2 | 400-06762 | TC CLAMP PLATE ASM. | 1 |
| 3 | 400-06765 | TC SUPPERT PLATE ASM. | 1 |
| 4 | 400-06768 | TC JOINT ASM. | 1 |
| 5 | 400-15800 | TC-LINK_ASM | 1 |
| 6 | SM-2360110-TP | SCREW M1.6X0.2 L=1.35 | 2 |
| 7 | WP-0320500-SC | WASHER M3 | 1 |
| 8 | RE-0200000-KO | E-RING | 2 |
| 9 | SD-0400266-TP | HINGE SCREW D=4 H=2.6 | 1 |
| 10 | 400-10589 | TC BASE | 1 |
| 11 | SM-6040650-TP | SCREW M4 L=6 | 4 |
| 12 | 400-06772 | TC CAM PLATE | 1 |
| 13 | 400-06780 | TC SPRING | 1 |
| 14 | 400-06781 | TC BASE COVER | 1 |
| 15 | SM-6020350-SP | SCREW M2 L=2.5 | 4 |
| 16 | 400-06782 | TC NOTCH R | 1 |
| 17 | SM-4020600-SP | SCREW M2 L=6 | 2 |
| 18 | 400-06777 | TC NOTCH F | 1 |
| 19 | SM-6020450-TP | SCREW | 2 |
| 20 | 400-10527 | TC_DRIVING_ARM_ASM. | 1 |
| 21 | 400-10528 | TC_DRIVING_ARM | (1) |
| 22 | 400-11152 | TC_ARM_SCREW | (2) |
| 23 | SD-0800406-TP | SHOULDER SCREW D8 H4 | 1 |
| 24 | 400-06776 | TC CONNECTING LINK | 1 |
| 25 | SD-0350156-TP | SHOULDER SCREW | 1 |
| 26 | 400-10530 | SENSOR_SLIT | 1 |
| 27 | SM-6030502-TP | BOLT M3X5 | 1 |
| 28 | 400-06864 | THREAD CLAMP MOTOR | 1 |
| 29 | SM-6041200-SP | SCREW M4 L=12 | 4 |
| 30 | 400-10531 | SENSOR_INSTALLING_BASE | 1 |
| 31 | SM-6040802-TP | SCREW M4X0.7 L=8 | 1 |
| 32 | HD-0005700-0A | PHOTO SENSOR | 2 |
| 33 | SL-4031091-SC | SCREW M3 X 10 | 2 |
| 34 | 400-10532 | DUST_GUARD | 1 |
| 35 | SM-4030601-SN | SCREW M3 X 6 | 1 |
| 36 | WP-0450801-SP | WASHER | 1 |
Page 22 — 9. SENSOR COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-05729 | TH SENSOR CABLE ASM. | 1 |
| 2 | 400-05731 | Y SENSOR CABLE ASM. | 1 |
| 3 | 400-05732 | PF SENSOR CABLE ASM. | 1 |
| 4 | 400-05730 | X SENSOR CABLE ASM. | 1 |
| 5 | 400-05733 | TT SENSOR CABLE ASM. | 1 |
| 6 | 400-06495 | SAFETY SW ASM. | 1 |
| 7 | 400-06496 | SAFETY SW BASE | (1) |
| 8 | 236-38109 | SAFETY SWITCH ARM. | (1) |
| 9 | 400-06497 | SAFETY SW ARM SHAFT | (1) |
| 10 | 236-38208 | SAFETY SWITCH SPRING | (1) |
| 11 | 236-38406 | SAFETY SWITCH NUT | (1) |
| 12 | 400-05734 | SAFETY SW CABLE ASM. | (1) |
| 13 | SM-4021201-SC | SCREW M2 L=12 | (2) |
| 14 | EA-9500B01-00 | CABLE BAND | (1) |
| 15 | SM-4050855-SP | SCREW | 1 |
| 16 | 400-05664 | INT PCB ASM. | 1 |
| 17 | 400-05660 | INT PCB | (1) |
| 18 | 400-05725 | INT CABLE ASM. | (1) |
| 19 | SL-4040881-SF | SCREW M4 L=8 | 4 |
| 20 | 141-15554 | HEAD GROUND CABLE A ASM. | 1 |
| 21 | SM-4040855-SP | SCREW | 1 |
| 22 | EA-9500B01-00 | CABLE BAND | 6 |
| 23 | EA-9500B02-00 | CABLE BAND 150 | 3 |
| 24 | HX-0015000-0K | CABLE CLIP | 1 |
| 25 | SM-4040855-SP | SCREW | 1 |
| 26 | HX-0033900-00 | STUD | 4 |
Page 23 — 10. THREAD STAND COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 229-30358 | THREAD STAND ASM. | 1 |
| 2 | 229-31109 | SPOOL RETAINER | (2) |
| 3 | 229-31000 | SPOOL PIN | (2) |
| 4 | 229-30903 | SPOOL REST CUSHION | (2) |
| 5 | 229-30804 | SPOOL REST | (2) |
| 6 | SM-6061610-SC | SCREW M6 L=16 | (2) |
| 7 | 229-30705 | THREAD GUIDE ARM JOINT | (2) |
| 8 | 229-31406 | SPOOL REST ROD RUBBER CAP | (1) |
| 9 | 229-30507 | SPOOL REST ARM | (2) |
| 10 | 229-30408 | SPOOL REST ROD, UPPER | (1) |
| 11 | 229-31307 | SPOOL REST ROD JOINT | (1) |
| 12 | SM-4051405-SE | SCREW M5 L=14 | (2) |
| 13 | NM-6050001-SE | NUT M5 | (2) |
| 14 | 229-30309 | SPOOL REST ROD, LOWER | (1) |
| 15 | 229-31208 | THREAD GUIDE | (2) |
| 16 | WS-0510002-KN | SPRING WASHER | (2) |
| 17 | NM-6050001-SE | NUT M5 | (2) |
| 18 | NM-6160511-SE | NUT M16X1.5 | (1) |
| 19 | WP-1702600-SO | WASHER 17X30X2.6 | (2) |
Page 25 — 11. TABLE STAND COMPONENTS (JT-K44)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06886 | TABLE | 1 |
| 2 | SK-3513201-SE | WOOD SCREW D=5.1 L=32 | 4 |
| 3 | 141-18053 | T-STAND COMPL. | 1 |
| 4 | 141-18152 | UPPER STAND ASM.,RIGHT | (1) |
| 5 | 141-18251 | STAND ASM.,RIGHT | (1) |
| 6 | B8101-210-AAB | UPPER STAND ASM. | (1) |
| 7 | B8105-210-AAA | STAND ASM. | (1) |
| 8 | 111-58300 | STAND SIDE SUPPORT | (1) |
| 9 | 111-58409 | STAND SIDE SUPPORT | (1) |
| 10 | 111-58607 | RUBBER CAP | (4) |
| 11 | 170-07402 | NUT | (2) |
| 12 | 111-58516 | UPPER STAND PLATE | (2) |
| 13 | SL-9082091-SE | WASHER HEXAGONAL BOLT | (12) |
| 14 | 138-17754 | Z-STAND PEDAL ASM. | (1) |
| 15 | 111-59001 | PEDAL SHAFT BRACKET | (2) |
| 16 | B8153-771-000 | PEDAL CONNECTING ROD | (1) |
| 17 | D8113-555-B00 | PEDAL BUSHING | (2) |
| 18 | GPF-06080000 | PEDAL ADJUSTING PLATE | (1) |
| 19 | GPF-060600A0 | PEDAL ASM. | (1) |
| 20 | SM-9061203-SE | SCREW M6 L=12 | (2) |
| 21 | WP-O671016-SE | WASHER 6.7X13X1 | (2) |
| 22 | WS-0621210-KR | SPRING WASHER 6.2X11.4X1.2 | (2) |
| 23 | SM-9082023-SE | SCREW M8 L=20 | (2) |
| 24 | WP-0871602-SE | WASHER 8.7X18X1.6 | (4) |
| 25 | WS-0861410-KR | SPRING WASHER 8.6X15X1.4 | (2) |
| 26 | NM-6080721-SE | NUT M8 | (2) |
| 27 | B8108-555-0A0 | ADJUSTING SCREW ASM. WITH CAP | (4) |
| 28 | NM-6120001-SE | NUT M12 | (4) |
| 29 | WP-1302501-SE | WASHER M12 | (4) |
| 30 | WS-1253010-KN | SPRING WASHER 12.5X21.5X3 | (4) |
| 31 | 111-55108 | DRAWER | 1 |
| 32 | 111-55207 | DRAWER SUPPORT | 2 |
| 33 | D8204-555-D00 | DRAWER STOPPER | 1 |
| 34 | SK-3311601-SE | WOOD SCREW D=3.1 L=16 | 6 |
| 141-1825] | STAND ASH, , RIGHT | (1) | |
| 1131-55108 | DRAWER | 1 |
Page 27 — 12. CONTROL BOX COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-55355 | CONTROL BOX | 1 |
| 2 | 400-55356 | CONTROL BOX FRONT COVER | 1 |
| 3 | 400-55357 | CONTROL BOX REAR COVER | 1 |
| 4 | SL-4040891-SC | SCREW M4 L=8 | 6 |
| 5 | SL-4040891-SC | SCREW M4 L=8 | 4 |
| 6 | M3801-476-000 | TRANSMISSION BOX FITTING PLATE | 1 |
| 7 | SM-6083002-TN | SCREW M8 L=30 | 4 |
| 8 | WS-0820002-KR | SPRING WASHER, M8 | 4 |
| 9 | WP-0841601-SC | WASHER 8.4X17.4X1.6 | 8 |
| 10 | NM-6080001-SC | NUT M8X1.25 | 8 |
| 11 | M4206-461-000 | WASHER | 4 |
| 12 | 400-05648 | MAIN PCB ASS'Y | 1 |
| 13 | 400-05641 | MAIN PCB | (1) |
| 14 | 400-05705 | MAIN PCB HEAT SINK | (2) |
| 15 | SL-4031081-SF | SCREW M3 L=10 | (6) |
| 16 | SL-4040881-SC | SCREW M4 L=8 | 6 |
| 17 | 400-00029 | SDC PCB A ASS'Y | 1 |
| 18 | SL-4040881-SC | SCREW M4 L=8 | 10 |
| 19 | 400-00056 | FLT-T PCB A ASS'Y | 1 |
| 20 | SL-4040881-SC | SCREW M4 L=8 | 6 |
| 21 | HX-0033900-00 | STUD | 6 |
| 22 | NM-3040520-SC | NUT M4 | 6 |
| 23 | 400-05401 | FAN MOTOR ASS'Y | 1 |
| 24 | KM-0000004-80 | FAN MOTOR | 1 |
| 25 | SL-4043591-SC | SCREW | 4 |
| 26 | NM-3040520-SC | NUT M4 | 4 |
| 27 | 400-05706 | MAIN PCB HOLDER PLATE | 1 |
| 28 | SL-4040881-SC | SCREW M4 L=8 | 5 |
| 29 | HX-0040700-00 | BUSH | 1 |
| 30 | 178-45009 | CORD FITTING PLATE | 1 |
| 31 | SL-4041091-SC | SCREW M4 L=10 | 2 |
| 32 | 400-05391 | POWER CORD 3P ASS'Y | 1 |
| 33 | HX-0041000-0A | STRAIN RELIEF BUSHING | 1 |
| 34 | 400-05393 | FLT-SDC CORD P ASS'Y | 1 |
| 35 | 400-05394 | FLT-SDC CORD S ASS'Y | 1 |
| 36 | 400-05726 | SDC-MAIN CORD P ASS'Y | 1 |
| 37 | 400-05727 | SDC-MAIN CORD S ASS'Y | 1 |
| 38 | 400-03484 | PEDAL SENSOR ASM. | 1 |
| 39 | 400-03485 | SENSOR FITTING PLATE A ASM. | (1) |
| 40 | M4001-461-000 | PEDAL SENSOR BASE | (1) |
| 41 | M4002-461-000 | PEDAL LEVER | (1) |
| 42 | M4004-461-000 | PEDAL RING | (1) |
| 43 | M4005-461-000 | VOLUME LINK | (1) |
| 44 | M4007-351-000 | FRONT SPRING | (1) |
| 45 | SM-4030801-SF | SCREW M3X0.5 L=8 | (1) |
| 46 | SM-8040802-TP | SCREW M4X8 | (2) |
| 47 | SV-4030601-SR | SCREW M3 L=6 | (2) |
| 48 | SL-4041681-SF | SCREW M4 L=16 | 3 |
| 49 | HX-0018800-0D | BUSH | 1 |
| 50 | SL-4040891-SC | SCREW M4 L=8 | 2 |
| 51 | HX-0051100-00 | WIRE SADDLE | 3 |
| 52 | E9607-603-000 | STICKER (SMALL) | 1 |
| 53 | E£9567-319-000 | EARTH MARK | 1 |
| 54 | 400-03458 | MASK SEAL | 10 |
| 400-0540! | FAN MOTOR ASS’Y | ] | |
| NN-3040520-SC | NUT M4 | 4 |
Page 29 — 13. OPERATION PANEL COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-05695 | OPERATION BOX A ASM. | 1 |
| 2 | 400-05677 | PANEL PCB ASS'Y | (1) |
| 3 | SL-4031081-SC | SCREW M3 X 10 | (4) |
| 4 | 400-05692 | OPERATION BOX FRONT CASE | (1) |
| 5 | 400-05693 | OPERATION BOX REAR CASE | (1) |
| 6 | 400-05691 | OPERATION PANEL SHEET | (1) |
| 7 | 400-05694 | PANEL PCB HOLDER PLATE | (1) |
| 8 | EA-9500B01-00 | CABLE BAND | (1) |
| 9 | SL-4031081-SC | SCREW M3 X 10 | (4) |
| 10 | BME-03200000 | VOLTAGE INDICATION SEAL | 1 |
| 11 | 400-05385 | ACCESSORIE PARTS A ASM. | 1 |
| 12 | M3004-511-00A | VOLTAGE INDICATION CARD,A | (1) |
| 13 | HF-0013031-5S | FUSE 3.15A 250V REF. NO.112 | (1) |
| 14 | HF-0030002-00 | FUSE 2A (220/240V) | (1) |
| 15 | HF-0013050-P0 | FUSE 5A | (1) |
| 16 | 229-58458 | CONNECTING ROD ASM. B | (1) |
| 17 | MAO- 11532000 | CORD STAPLE | (3) |
| 18 | SK-3512001-SE | WOOD SCREW D=5.1 L=20 | (2) |
| 19 | MTS-HJ100003 | BOLT | (2) |
| 20 | SM-6084002-TN | SCREW M8 L=40 | (1) |
| 21 | WP-0852086-SC | WASHER M8 | (2) |
| 22 | WP-0841601-SC | WASHER 8.4X17.4X1.6 | (1) |
| 23 | WS-0820002-KR | SPRING WASHER, M8 | (3) |
| 24 | NM-6080002-SC | NUT M8 | (2) |
| 25 | M9017-580-0A0 | POWER CABLE ASM. | 1 |
| 26 | HA-0042500-00 | SWITCH | 1 |
| 27 | 400-05697 | OPERATION BOX FITTING PLATE | 1 |
| 28 | SK-3382001-SE | SCREW D=3.8 L=20 | 4 |
| 29 | SL-4041691-SC | SCREW M4 L=16 | 3 |
| 30 | CM-3001004-01 | LABEL 3 (LARGE) | 1 |
| 31 | CM-3004006-01 | VOLTAGE CAUTION LABEL | 1 |
| 32 | GPK-570010B0 | PEDAL SWITCH ASM. | 1 |
| 33 | M9013-590-0A0 | PK57 TRANSFER CABLE ASM. | 1 |
| FA-9500B01-00 | CABLE BAND | (1) | |
| BHE-03200000 | VOLTAGE INDICATION SEAL | i | |
| NF-0030002-00 | FUSE 2A (220/240V) | (1) | |
| SK-6084002-TN | SCREW M8 L=40 | (1) | |
| N¥-6080002-SC | NUT M8 | (2) | |
| CH-3001004-01 | LABEL 3 (LARGE) | 1 | |
| CH-3004006-01 | VOLTAGE CAUTION LABEL | 1 |
Page 31 — 14. WIRING DIAGRAM 電装配線図
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-05700 | CONTROL BOX A ASM. | 1 |
| 2 | 400-05701 | CONTROL BOX B ASM. | 1 |
| 3 | 400-05702 | CONTROL BOX C ASM. | 1 |
| 4 | 400-05648 | MAIN PCB ASS'Y | (1) |
| 5 | 400-05727 | SDC-MAIN CORD S ASS'Y | (1) |
| 6 | 400-057 26 | SDC-MAIN CORD P ASS'Y | (1) |
| 7 | 400-00029 | SDC PCB A ASS'Y | (1) |
| 8 | 400-05393 | FLT-SDC CORD P ASS'Y | (1) |
| 9 | 400-05394 | FLT-SDC CORD S ASS'Y | (1) |
| 10 | 400-05391 | POWER CORD 3P ASS'Y | (1) |
| 11 | 400-05392 | POWER CORD 1P ASS'Y | (1) |
| 12 | 400-05388 | POWER CORD 1P220V ASS'Y | (1) |
| 13 | 400-00056 | FLT-T PCB A ASS'Y | (1) |
| 14 | 400-00046 | FLT-S PCB A ASS'Y | (1) |
| 15 | 400-00046 | FLT-S PCB A ASS'Y | (1) |
| 16 | 400-05401 | FAN MOTOR ASS'Y | (1) |
| 17 | M9017-580-0A0 | POWER CABLE ASM. | 1 |
| 18 | M9035-580-0A0 | POWER SOURCE CORD ASM. | 1 |
| 19 | M9034-580-0A0 | GROUND CORD ASM. | 1 |
| 20 | 400-05390 | POWER CABLE JE ASS'Y | 1 |
| 21 | M9024-580-0A0 | POWER CABLE ASM.,100V | 1 |
| 22 | 400-05730 | X SENSOR CABLE ASM. | 1 |
| 23 | 400-05731 | Y SENSOR CABLE ASM. | 1 |
| 24 | 400-05732 | PF SENSOR CABLE ASM. | 1 |
| 25 | 400-05729 | TH SENSOR CABLE ASM. | 1 |
| 26 | 400-05733 | TT SENSOR CABLE ASM. | 1 |
| 27 | 400-05734 | SAFETY SW CABLE ASM. | 1 |
| 28 | 400-05664 | INT PCB ASM. | 1 |
| 29 | 400-06628 | AT SOLENOID | 1 |
| 30 | 400-29901 | X FEED MOTOR | 1 |
| 31 | 400- 29902 | Y FEED MOTOR | 1 |
| 32 | 400-29903 | PRESSER LIFTING MOTOR | 1 |
| 33 | 400-06864 | THREAD CLAMP MOTOR | 1 |
| 34 | 400-06912 | SOLENOID FOR PICK UP ASM. | 1 |
| 35 | 400-05728 | SOLENOID RELAY CABLE ASM. | 1 |
| 36 | 400-03484 | PEDAL SENSOR ASM. | 1 |
| 37 | 400-05695 | OPERATION BOX A ASM. | 1 |
| 38 | 400-05677 | PANEL PCB ASS'Y | (1) |
| 39 | 400-28015 | AC SERVO MOTOR | 1 |
| 40 | HA-0042500-00 | SWITCH | 1 |
| 41 | M9013-590-0A0 | PK57 TRANSFER CABLE ASM. | 1 |
| 42 | GPK-570010B0 | PEDAL SWITCH ASM. | 1 |
| 69024-580-0A0 | POWER CABLE ASM. , 100V | 1 |
Page 33 — 15. ACCESSORIE PART COMPONENTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-48536 | HEAD_COVER | 1 |
| 2 | 229-32800 | ACCESSORIE BAG | 1 |
| 3 | 400-06484 | SAFETY PLATE ASM | 1 |
| 4 | 400-51987 | SAFETY PLATE BASE | (1) |
| 5 | B3120-372-000 | SAFETY PLATE | (1) |
| 6 | SM-4040655-SP- | SCREW M4 L=6 | (2) |
| 7 | SM-4040855-SP | SCREW | (1) |
| 8 | WP-0450801-SD | WASHER 4.5X10X0.8 | (2) |
| 9 | SL-6084092-TN | BOLT | 1 |
| 10 | WS-0610002-KN | SPRING WASHER 6.1X12.2X1.5 | 4 |
| 11 | 400-16195 | BED_HINGE_RUBBER | 2 |
| 12 | 400-36110 | GREASE JOINT B | 1 |
| 13 | 400-13640 | JUKI_GREASE_B_TUBE | 1 |
| 14 | NM-6060001-SC | NUT M6 | 8 |
| 15 | WP-0651646-SC | WASHER | 4 |
| 16 | SM-6066002-TN | BOLT M6 L=60 | 4 |
| 17 | 141-01208 | HEAD SUPPORT BAR | 1 |
| 18 | B9121-220-0A0 | OILER (CONTAINING NO.2 OIL) | 1 |
| 19 | B9121-012-000 | OIL CAN | 1 |
| 20 | B8202-205-000 | OIL MANAGEMENT | 1 |
| 21 | SK-3311601-SE | WOOD SCREW D=3.1 L=16 | 4 |
| 22 | 229-33006 | SCREW DRIVER,LARGE | 1 |
| 23 | 229-33105 | SCREW DRIVER,MIDDLE | 1 |
| 24 | 229-33204 | SCREW DRIVER,SMALL | 1 |
| 25 | B9113-012-000 | WRENCH (9X10) | 1 |
| 26 | B9140-372-000 | HEXAGONAL WRENCH, SMALL | 1 |
| 27 | B9141-372-000 | HEXAGONAL WRENCH, LARGE | 1 |
| 28 | GCT-02906000 | HEXAGONAL SPANNER | 1 |
| 29 | MDP-500B1402 | NEEDLE DPX5#14-2 | 1 |
| 30 | MDP-170B2102 | NEEDLE DPX17#21-2 | 1 |
| 31 | MDP-500B1102 | DPX5#11-2 | 1 |
| 32 | 400-16194 | FRAME_SUPPORT_RUBBER | 2 |
| 33 | 138-12102 | BOBBIN | 1 |
| 34 | SM-6066002-TN | BOLT M6 L=60 | 1 |
| 35 | NM-6060001-SC | NUT M6 | 1 |
| 36 | WP-0651646-SC | WASHER | 1 |
| 37 | 135-71906 | CLOTH PRESSER FOOT (RIGHT) | 1 |
| 38 | 135-72003 | CLOTH PRESSER FOOT (LEFT) | 1 |
| 39 | 141-16503 | FEED PLATE E | 1 |
| 40 | 141-16909 | FEED PLATE I | 1 |
| 41 | 135-73407 | FINGER GUARD | 1 |
| 42 | B1111-210-D00 | BED HINGE | 2 |
| 43 | B1115-210-D00 | HINGE RUBBER | 2 |
| NM-GO060001-SC | NUT M6 | 8 | |
| NH-6060001-SC | NUT H6 | 1 | |
| B1115-210-DO00 | HINGE RUBBER | 2 |
Page 35 — 16. EXCLUSIVE PARTS FOR LK-1901AS (1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | MDP-500B1400 | NEEDLE DPX5 #14 | 1 |
| 2 | 400-05728 | SOLENOID RELAY CABLE ASM. | 1 |
| 3 | 400-11949 | CONNECTING ARM B | 1 |
| 4 | WP-0651056-SH | WASHER 6.5X11X1 | 1 |
| 5 | SD-1201506-TP | SHOULDER SCREW | 1 |
| 6 | 400-10458 | WIPER_CONNECTING_PLATE | 1 |
| 7 | B2101-280-0A0 | WIPER ASM. | 1 |
| 8 | 141-03352 | INNER HOOK PRESSER ASM., B | 1 |
| 9 | 400-06580 | SHUTTLE | 1 |
| 10 | 400-06722 | NEEDLE PLATE ASM.,A | 1 |
| 11 | B2417-280-000 | THREAD CUTTER LEVER SHAFT | (1) |
| 12 | B2426-280-000 | NEEDLE HOLE GUIDE | (1) |
| 13 | SS-1060210-TP | SCREW 3/32-56 L=2.2 | (2) |
| 14 | 400-06721 | NEEDLE PLATE | (1) |
| 15 | B2424-280-000 | FIXING KNIFE | (1) |
| 16 | SS-7090410-SP | SCREW 9/64-40 L= 3.5 | (1) |
| 17 | B2418-280-000 | MOVING KNIFE LINK | (1) |
| 18 | B2416-280-000 | THREAD CUTTING LEVER RING | (1) |
| 19 | B2415-280-0A0 | THREAD CUTTER LEVER ASM., SMAL | (1) |
| 20 | B2414-280-0A0 | THREAD CUTTER LEVER ASM., LARG | (1) |
| 21 | SS-6110430-TP | SCREW 11/64-40 L= 4.0 | (1) |
| 22 | WP-0450846-SP | WASHER | (1) |
| 23 | SS-7110740-TP | SCREW 11/64-40 L=7 | (1) |
| 24 | B2423-280-00C | MOVING KNIFE WASHER C | (1) |
| 25 | B2423-280-00A | MOVING KNIFE WASHER A | (1) |
| 26 | B2423-280-00B | MOVING KNIFE WASHER B | (1) |
| 27 | B2423-280-00D | MOVING KNIFE WASHER D | (1) |
| 28 | B2423-280-00E | MOVING KNIFE WASHER E | (1) |
| 29 | B2421-280-0A0 | MOVING KNIFE ASM. | (1) |
| 30 | SD-0500091-TP | HINGE SCREW D= 5.0 H= 0.9 | (1) |
| 31 | 400-06912 | SOLENOID FOR PICK UP ASM. | 1 |
| 32 | 141-41758 | SOLENOID FOR PICK-UP COMPL. | (1) |
| 33 | HK-0346100-4A | HOUSING,BLUE 4P | (1) |
| 34 | HK-0346400-00 | PIN CONTACT | (2) |
| 35 | 400-06913 | SOLENOID INSTALLING BASE | (1) |
| 36 | SL-4030881-SC | SCREW M3X8 | (4) |
| 37 | 122-58000 | BUSH | (1) |
| 38 | 141-48407 | VERTICAL FEED SHAFT SPRING | 2 |
| 39 | 400-06525 | NEEDLE BAR THREAD GUIDE | 1 |
| 40 | SM-4061255-SP | SCREW M6 L=12 | 3 |
| 41 | SM-6030500-SN | SCREW M3 L=5 | 1 |
| 42 | SM-6061802-TP | SCREW M6 L=18 | 1 |
| 43 | B1229-232-000 | SNAP RING | 1 |
| 44 | SD-0640216-TP | SHOULDER SCREW | 1 |
| 45 | SM-1040650-TP | SCREW | 4 |
| 46 | 141-42103 | CONNECTING LINK GUIDE | 1 |
| 47 | B1657-506-E00 | SPRING | 1 |
| 48 | 135-40604 | DRIVING BAR B | 1 |
| 49 | B3027-450-00B | PIN | 1 |
| 50 | SL-6040892-TN | BOLT | 2 |
| 51 | PD-0201000-0B | SPLIT PIN | 1 |
| 52 | SL-4030681-SC | SCREW M3 L=6 | 2 |
| 53 | RC-0410415-KP | C-RING | 2 |
| 54 | 400-06914 | WORK CLAMP CONNECTING LINK | 1 |
| We-0651056-SH | WASHER 6.5X11X1 | l | |
| 1414-03352 | INNER HOOK PRESSER ASM., B | 1 | |
| 400-0672] | NEEDLE PLATE | (1) | |
| SS-7080410-SP | SCREW 9/64-40 L= 3.5 | (1) | |
| 8B2423-280-00D | MOVING KNIFE WASHER D | (1) | |
| 82423-280-00E | MOVING KNIFE WASHER E | (1) | |
| SK-6030500-SN | SCREW M3 L=5 | 1 | |
| SK-6061802-TP | SCREW M6 L=18 | 1 | |
| SK-1040650-TP | SCREW | 4 | |
| PD-0201000-08 | SPLIT PIN | 1 |
Page 37
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06935 | CROTH FEED PRESSER PLATE B | 1 |
| 2 | SM-9061403-CP | SCREW M6 L=14 | 1 |
| 3 | WP-0612516-SD | WASHER 6.1X15.2X2.5 | 1 |
| 4 | SM-6061202-TP | SCREW M6 L=12 | 1 |
| 5 | WP-0612516-SD | WASHER 6.1X15.2X2.5 | 1 |
| 6 | 141-40255 | WORK CLAMP FOOT BRACKET COMPL. | 1 |
| 7 | 135-41404 | WORK CLAMP FOOT LIFTING PLATE | (1) |
| 8 | S$S-9151120-CP | SCREW 15/64-28 L=11 | (2) |
| 9 | WP-0612516-SD | WASHER 6.1X15.2X2.5 | (2) |
| 10 | D2545-232-D0A | HINGE SCREW | (2) |
| 11 | D2545-232-DOB | HINGE SCREW | (2) |
| 12 | D2545-232-D0C | HINGE SCREW | (2) |
| 13 | 141-41055 | PULLING PLATE COMPL. | (1) |
| 14 | NS-6110530-SP | NUT 11/64-40 | (1) |
| 15 | 141-41105 | FIXING HOOK | (1) |
| 16 | D2512-232-D00 | TORSION SPRING | (1) |
| 17 | D2511-232-D00 | SCREW | (1) |
| 18 | 141-40354 | INSTALLING BASE COMPL. | (1) |
| 19 | 141-41402 | INSTALLING SHAFT | (1) |
| 20 | RE-0700000-KO | E-RING 7 | (2) |
| 21 | SS-9110920-CP | SCREW 11/64-40 L=9 | (1) |
| 22 | 141-40909 | ADJUSTING PLATE | (1) |
| 23 | D)2515-232-D00 | TORSION SPRING | (1) |
| 24 | SS-7110510-SP | SCREW 11/64-40 L=5 | (2) |
| 25 | 135-41107 | WORK CLAMP FOOT SPRING HOLDER | (1) |
| 26 | 141-40552 | PICK-UP GUIDE COMPL. | (1) |
| 27 | SS-1110640-TP | SCREW 11/64-40 L= 5.5 | (2) |
| 28 | D2520-232-DAO | WORK CLAMP FOOT(LEFT)ASM. | (1) |
| 29 | D2521-232-DAO | WORK CLAMP FOOT(RIGHT)ASM. | (1) |
| 30 | SD-0550271-TP | HINGE SCREW D= 5.50 H= 2.7 | (2) |
| 31 | 141-41204 | PLATE CAM | (1) |
| 32 | NS-6120480-SP | NUT 3/16-28 | (2) |
| 33 | 141-40750 | PREVENTING PLATE COMPL. | (1) |
| 34 | SS-9110460-CP | SCREW 11/64-40 L=4 | (2) |
| 35 | 141-40206 | PICK-UP INSTALLING BASE | (1) |
| 36 | 141-41501 | FINGER GUARD | (1) |
| 37 | SS-7090610-SP | SCREW 9/64-40 L=6 | (2) |
| 38 | 135-41503 | FEED PLATE | 1 |
| 39 | SS-9110460-CP | SCREW 11/64-40 L=4 | 1 |
| 40 | WP-0501016-SD | WASHER 5X10.5X1 | 1 |
| 41 | B3117-352-000 | THREAD TENSION POST NUT | 2 |
| 42 | D2527-232-D00 | SLEEVE | 1 |
| 43 | D2528-232-D00 | SHAFT | 1 |
| 44 | D2529-232-D00 | PRESSER SPRING | 1 |
| 45 | 135-41602 | WORK CLAMP FOOT SPRING HOLDER | 1 |
| 46 | SM-5040855-SN | SCREW | 2 |
| SH-6061202-TP | SCREW MG L=12 | I | |
| 0D2545-232-D0A | HINGE SCREW | (2) | |
| D2545-232-DO0C | HINGE SCREW | (2) | |
| SH-5040855-SN | SCREW | 2 |
Page 39 — 18. EXCLUSIVE PARTS FOR LK-1902AS,LK-1902AH (1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | B1114-581-000 | THREAD GUIDE PLATE | 1 |
| 2 | SM-4061255-SP | SCREW M6 L=12 | 1 |
| 3 | 400-06525 | NEEDLE BAR THREAD GUIDE | 1 |
| 4 | D1405-L7A-M00 | NEEDLE BAR THREAD GUIDE | 1 |
| 5 | MDP-500B1400 | NEEDLE DPX5 #14 | 1 |
| 6 | MDP-170B2100 | NEEDLE DPX17 #21 | 1 |
| 7 | 137-86306 | THREAD GUIDE NO.1 | 1 |
| 8 | SM-6030500-SN | SCREW M3 L=5 | 1 |
| 9 | B1229-232-000 | SNAP RING | 1 |
| 10 | SD-0640216-TP | SHOULDER SCREW | 1 |
| 11 | SM-1040650-TP | SCREW | 4 |
| 12 | 400-05712 | EARTH CODE ASM. | 1 |
| 13 | 141-43002 | FEED PLATE | 1 |
| 14 | SM-3061052-TP | SCREW M6 L=10 | 1 |
| 15 | WP-0621016-SD | WASHER 6.2X13X1 | 1 |
| 16 | 400-06677 | WIPER CONNECTING PLATE | 1 |
| 17 | B2101-280-0A0 | WIPER ASM. | 1 |
| 18 | D2101-L7A-MA0 | WIPER ASM. | 1 |
| 19 | 141-03352 | INNER HOOK PRESSER ASM., B | 1 |
| 20 | 141-03659 | SHUTTLE RACE RING ASM.,C | 1 |
| 21 | 400-06580 | SHUTTLE | 1 |
| 22 | 400-06581 | SHUTTLE (H) | 1 |
| 23 | 400-06722 | NEEDLE PLATE ASM.,A | 1 |
| 24 | 400-06723 | NEEDLE PLATE ASM.,H | 1 |
| 25 | B2417-280-000 | THREAD CUTTER LEVER SHAFT | (1) |
| 26 | B2426-280-000 | NEEDLE HOLE GUIDE | (1) |
| 27 | 141-09607 | NEEDLE HOLE GUIDE | (1) |
| 28 | SS-1060210-TP | SCREW 3/32-56 L=2.2 | (2) |
| 29 | 400-06721 | NEEDLE PLATE | (1) |
| 30 | B2424-280-000 | FIXING KNIFE | (1) |
| 31 | SS-7090410-SP | SCREW 9/64-40 L=3.5 | (2) |
| 32 | B2418-280-000 | MOVING KNIFE LINK | (1) |
| 33 | B2416-280-000 | THREAD CUTTING LEVER RING | (1) |
| 34 | B2415-280-0A0 | THREAD CUTTER LEVER ASM., SMAL | (1) |
| 35 | B2414-280-0A0 | THREAD CUTTER LEVER ASM., LARG | (1) |
| 36 | SS-6110430-TP | SCREW 11/64-40 L= 4.0 | (1) |
| 37 | WP-0450846-SP | WASHER | (1) |
| 38 | SS-7110740-TP | SCREW 11/64-40 L=7 | (1) |
| 39 | B2423-280-00C | MOVING KNIFE WASHER C | (1) |
| 40 | B2423-280-00A | MOVING KNIFE WASHER A | (1) |
| 41 | B2423-280-00B | MOVING KNIFE WASHER B | (1) |
| 42 | B2423-280-00D | MOVING KNIFE WASHER D | (1) |
| 43 | B2423-280-00E | MOVING KNIFE WASHER E | (1) |
| 44 | B2421-280-0A0 | MOVING KNIFE ASM. | (1) |
| 45 | SD-0500091-TP | HINGE SCREW D= 5.0 H= 0.9 | (1) |
| 46 | 135-43764 | CLOTH FEED BASE ASM. | 1 |
| 47 | 135-44465 | CLOTH PRESSER FOOT ASM. | (1) |
| 48 | SS-2110930-SP | SCREW 11/64-40 L=8.7 | (4) |
| 49 | 135-44614 | CLOTH FEED BASE COVER | (1) |
| 50 | 135-43715 | CLOTH FEED BASE | (1) |
| 51 | B2539-280-000 | STUD | (1) |
| 52 | CS-087101B-SH | THRUST COLLAR ASM. D=8.73 W=10 | (1) |
| 53 | SS-8150822-TP | SCREW 15/64-28 L=8 | (2) |
| 54 | 135-43806 | BALL HOLDER | (1) |
| 55 | SS-7151210-SP | SCREW 15/64-28 L=12 | (1) |
| 56 | B2549-280-000 | WORK CLAMP FOOT MOUNTING BASE | (7) |
| 57 | B2548-280-000 | BALL RETAINER | (1) |
| 58 | SS-7110740-TP | SCREW 11/64-40 L=7 | (1) |
| 59 | 135-43905 | SPRING SUSPENSION | (1) |
| 60 | SS-6120940-SP | SCREW 3/16-28 L=9 | (2) |
| 61 | 135-44705 | SPRING | (1) |
| 62 | B3413-552-000 | SUSPENSION SCREW | (1) |
| 63 | 135-44051 | LIFTING LEVER ASM. | (1) |
| 64 | SS-8150822-TP | SCREW 15/64-28 L=8 | (2) |
| 65 | B1816-280-000 | GUIDE PIN | (2) |
| MNDP-500B1400 | NEEDLE DPX5 #14 | 1 | |
| 8D-0640216-TP | SHOULDER SCREW | 1 | |
| SW-1040650-TP | SCREW | 4 | |
| SH-3061052-TP | SCREW M6 L=10 | 1 | |
| 4000-06677 | WIPER CONNECTING PLATE | T | |
| 82101-280-0A0 | WIPER ASK, | 1 | |
| 9D2101-L7A-MAO | WIPER ASM, | l | |
| 1414-03352 | INNER HOOK PRESSER ASW., B | I | |
| 400-0580 | SHUTTLE | i | |
| 14141-09607 | NEEDLE HOLE GUIDE | (1) | |
| S3-7O90TT0-SP | SCREW 9764-40 L= 3.5 | (3) | |
| 35-6110440-TP | SCREW 11/64-40 L= 4.0 | (1) | |
| B2423-280-00£ | MOVING KNIFE WASHER E | (1) | |
| §D-0500091-TP | HINGE SCREW D= 5.0 H= 0.9 | (1) | |
| 7135-43764 | CLOTH FEED BASE ASU. | I | |
| B2599-280-000 | STUD | (1) | |
| S8S~7110740-TP | SCREW 11/64-40 L=7 | (1) | |
| 1355-44705 | SPRING | (1) |
Page 41
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 135-08056 | T-STAND COMPL. | 1 |
| 2 | 111-57559 | T-STAND ASM. | (1) |
| 3 | 111-57658 | STAND UPPER, RIGHT | (1) |
| 4 | 111-57757 | STAND UPPER, LEFT | (1) |
| 5 | 111-57955 | STUD ASM., RIGHT | (1) |
| 6 | 111-58052 | STRUT JUNCTION (LEFT) | (1) |
| 7 | 111-58300 | STAND SIDE SUPPORT | (1) |
| 8 | 111-58409 | STAND SIDE SUPPORT | (1) |
| 9 | 111-58607 | RUBBER CAP | (4) |
| 10 | 170-07402 | NUT | (2) |
| 11 | WP-1302501-SE | WASHER M12 | (4) |
| 12 | WS-1253010-KN | SPRING WASHER 12.5X21.5X3 | (4) |
| 13 | B8108-555-0A0 | ADJUSTING SCREW ASM. WITH CAP | (4) |
| 14 | NM-6120003-SE | NUT M12 | (4) |
| 15 | 111-58508 | PLATE | (2) |
| 16 | SL-9082091-SE | WASHER HEXAGONAL BOLT | (12) |
| 17 | 138-17754 | Z-STAND PEDAL ASM. | (1) |
| 18 | GPF-060600A0 | PEDAL ASM. | (1) |
| 19 | GPF-06080000 | PEDAL ADJUSTING PLATE | (1) |
| 20 | 111-59001 | PEDAL SHAFT BRACKET | (2) |
| 21 | B8153-771-000 | PEDAL CONNECTING ROD | (1) |
| 22 | D8113-555-B00 | PEDAL BUSHING | (2) |
| 23 | SM-9061203-SE | SCREW M6 L=12 | (2) |
| 24 | WP-0671016-SE | WASHER 6.7X13X1 | (2) |
| 25 | WS-0621210-KR | SPRING WASHER 6.2X11.4X1.2 | (2) |
| 26 | SM-9082023-SE | SCREW M8 L=20 | (2) |
| 27 | WP-0871602-SE | WASHER 8.7X18X1.6 | (4) |
| 28 | WS-0861410-KR | SPRING WASHER 8.6X15X1.4 | (2) |
| 29 | NM-6080721-SE | NUT M8 | (2) |
| 30 | 400-05709 | RELAY CODE ASM. | 1 |
| 31 | 400-05739 | INT PCB CODE ASM. | (1) |
| 32 | 400-05740 | AC CODE ASM. | (1) |
| 33 | 400-05711 | SERVO MOTOR P CODE ASM. | (1) |
| 34 | 400-05710 | SERVO MOTOR S CODE ASM. | (1) |
| 35 | 400-05735 | X MOTOR CODE ASM. | (1) |
| 36 | 400-05736 | Y MOTOR CODE ASM. | (1) |
| 37 | 400-05737 | P MOTOR CODE ASM. | (1) |
| 38 | 400-05738 | T MOTOR CODE ASM. | (1) |
| 39 | M9640-510-00A | CABLE CLIP | (3) |
| 40 | SK-3382001-SE | SCREW D=3.8 L=20 | (6) |
| 41 | 400-06887 | TABLE B | 1 |
| 1114-58052 | STRUT JUNCTION (LEFT) | 1 | |
| SH-9061203-SE | SCREW M6 L=12 | 2 | |
| NH-6080721-SE | NUT M8 | 2 |
Page 43
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-06923 | THREAD TAKE UP B COMPL. | 1 |
| 2 | 400-06924 | THREAD TAKE UP LEVER B ASM. | (1) |
| 3 | 400-06925 | THREAD TAKE UP LEVER B | (1) |
| 4 | B1908-505-000 | THREAD PASS BUSH | (1) |
| 5 | SB-1080022-00 | BEARING | (2) |
| 6 | SB-1040016-00 | BEARING | (1) |
| 7 | 400-06534 | NEEDLE BAR CRANK ROD ASM. | (1) |
| 8 | 400-06535 | NEEDLE BAR CRANK ROD | (1) |
| 9 | SB-1080023-00 | BEARING | (1) |
| 10 | 228-91006 | NEEDLE BAR CRANK ROD BUSH | (1) |
| 11 | 400-06532 | THREAD TAKE UP CRANK | (1) |
| 12 | 400-06926 | NEEDLE ROD CRANK B | (1) |
| 13 | B1903-552-000 | LEFT SCREW | (1) |
| 14 | 400-06525 | NEEDLE BAR THREAD GUIDE | 1 |
| 15 | MDP~170B1400 | NEEDLE DPX17 #14 | 1 |
| 16 | SM-6061802-TP | SCREW M6 L=18 | 1 |
| 17 | 400-11949 | CONNECTING ARM B | 1 |
| 18 | B2619-372-000 | STOP MOTION TRIPPING LEVER CAM | 1 |
| 19 | B1853-512-00E | HOOK SHAFT WASHER | 1 |
| 20 | SD-0791271-SP | HINGE SCREW D= 7.94 H=12.7 | 1 |
| 21 | 400-06937 | WIPER CONNECTING PLATE B | 1 |
| 22 | 400-33047 | WIPER ASM. | 1 |
| 23 | SS-5060310-SP | SCREW 3/32-56 L=2.8 | 2 |
| 24 | 400-09860 | WIPER THREAD CATCH SPRING | 1 |
| 25 | 141-03352 | INNER HOOK PRESSER ASM., B | 1 |
| 26 | 400-06580 | SHUTTLE | 1 |
| 27 | 400-06725 | NEEDLE PLATE ASM.,M | 1 |
| 28 | 400-06726 | NEEDLE PLATE ASM.,K | 1 |
| 29 | 400-06721 | NEEDLE PLATE | (1) |
| 30 | MAZ-15801000 | GUIDE | (1) |
| 31 | MAZ-15601000 | GUIDE | (1) |
| 32 | B2424-280-000 | FIXING KNIFE | (1) |
| 33 | B2421-280-0A0 | MOVING KNIFE ASM. | (1) |
| 34 | B2418-280-000 | MOVING KNIFE LINK | (1) |
| 35 | B2416-280-000 | THREAD CUTTING LEVER RING | (1) |
| 36 | B2415-280-0A0 | THREAD CUTTER LEVER ASM., SMAL | (1) |
| 37 | B2414-280-0A0 | THREAD CUTTER LEVER ASM., LARG | (1) |
| 38 | B2417-280-000 | THREAD CUTTER LEVER SHAFT | (1) |
| 39 | SS-1060210-TP | SCREW 3/32-56 L=2.2 | (2) |
| 40 | SD-0500091-TP | HINGE SCREW D= 5.0 H= 0.9 | (1) |
| 41 | SS-7110740-TP | SCREW 11/64-40 L=7 | (1) |
| 42 | SS-6110430-TP | SCREW 11/64-40 L= 4.0 | (1) |
| 43 | SS-7090410-SP | SCREW 9/64-40 L= 3.5 | (2) |
| 44 | B2423-280-00A | MOVING KNIFE WASHER A | (1) |
| 45 | B2423-280-00B | MOVING KNIFE WASHER B | (1) |
| 46 | B2423-280-00C | MOVING KNIFE WASHER C | (1) |
| 47 | B2423-280-00D | MOVING KNIFE WASHER D | (1) |
| 48 | B2423-280-00E | MOVING KNIFE WASHER E | (1) |
| 49 | WP-0450846-SP | WASHER | (1) |
| 50 | SM-6030500-SN | SCREW M3 L=5 | 1 |
| 51 | RC-0470611-KP | RETAINING RING 4.7 | 1 |
| 52 | SD-0640216-TP | SHOULDER SCREW | 1 |
| 53 | SM-1040650-TP | SCREW | 4 |
| 54 | 400-10429 | COUNTER_WEIGHT_B | 1 |
| B1853-512-G0E | HOOK SHAFT WASHER | 1 | |
| WAZ-15601000 | GUIDE | (1) | |
| $S-1060210-TP | SCREW 3/32-56 L=2.2 | (2) | |
| 82423-280-00B | MOVING KNIFE WASHER B | (1) | |
| B2423-280-00F | MOVING KNIFE WASHER E | (1) | |
| SH-6030500-SN | SCREW M3 L=5 | 1 |
Page 45
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 141-45106 | CLOTH FEED PLATE | 1 |
| 2 | 400-06935 | CROTH FEED PRESSER PLATE B | 1 |
| 3 | 141-48407 | VERTICAL FEED SHAFT SPRING | 1 |
| 4 | 141-45858 | VERY SMALL CLAMP MECHANISM ASM | 1 |
| 5 | 141-45650 | MEDIUM CLAMP MECHANISM ASM. | 1 |
| 1414-45106 | CLOTH FEED PLATE | 1 | |
| 141-46104 | PICK-UP INSTALLING BASE | 1 | |
| 141-46203 | PICK-UP FOOT INSTALLING BASE | 1 | |
| 141-46302 | PICK-UP FOOT INSTALLING BASE | 1 | |
| B2552-372-000 | BUTTON CLAMP SLIDE | 1 | |
| HAZ~15513000 | BUTTON CLAMP JAW LEVER SPRING | 1 | |
| WAZ-15514000 | SUPPORT PLATE | 1 | |
| WAZ-15515000 | SLIDE BLOCK | 1 | |
| 135-40901 | STATIONING BLOCK SHAFT | 1 | |
| 141-4640] | PRESSER PLATE | 1 | |
| 141-49058 | MIDDLE CLANP JAW LEVER ASN. ,R | 1 | |
| WAZ-15507000 | SMALL CLAMP JAW LEVER ASW. ,L | 1 | |
| SS-7090410-SP | SCREW 9/64-40 L= 3.5 | 1 | |
| 1415-49009 | PLATE L, R | 1 | |
| SS-2060310-SP | SCREW 3/32-56 L=3 | 1 | |
| 141-49157 | MIDDLE CLAMP JAW LEVER ASN. ,L | 1 | |
| WAZ-15508000 | SMALL CLAMP JAW LEVER, L | 1 | |
| MAZ-15510000 | SPRING, LEFT | 1 | |
| 141-49108 | PLATE L, L | 1 | |
| MAZ-158070BB | EXTRA SMALL CLAMP LEVER ASN. ,L | 1 | |
| MAZ-158070AB | EXTRA SHALL CLAMP LEVER ASK. ,L | 1 | |
| WAZ-158080BE | EXTRA SMALL CLAMP LEVER ASK. ,L | 1 | |
| MAZ~158080AB | EXTRA SMALL CLAMP LEVER ASK. ,L | 1 | |
| MAZ-15810000 | SPRING, LEFT | 1 | |
| D3130-M1Y-COO | FINGER GUARD | 1 | |
| 141-41402 | INSTALLING SHAFT | 1 | |
| B2548~-372-000 | SNAP FASTENER CLAMP STOP LEVER | 1 | |
| B2549-372-000 | CLAMP SCREW A | 1 | |
| B2553-372-000 | NUT | 1 | |
| B2560-372-000 | BUTTON CLAMP STOP PIN | 2 | |
| SD-0640391-TP | HINGE SCREW D= 6.35 H= 3.9 | 2 | |
| SD-0550181-SP | HINGE SCREW D= 5.50 H= 1.8 | 1 | |
| $D-0550301-SP | HINGE SCREW D=5,5 H=3 | 1 | |
| $S-9621413-SP | SCREW 3/16-32 L=13,5 | 2 | |
| SS-9110460-CP | SCREW 11/64-40 L=4 | 2 | |
| NS-6150310-9P | NUT 16764-28 | 1 | |
| RE-0700000-K0 | E-RING 7 | 2 | |
| WP-0501016-SD | WASHER 5X10.5X1 | 2 | |
| D2548-232-D00 | SNAP RING, FOR CONNECTING ROD | 1 | |
| MAZ-15502000 | PRESSURE PLATE | 1 | |
| ¥MAZ-15602000 | PRESSURE PLATE | 1 | |
| SS-9110543-CP | SCREW 11/64-40 L=5.3 | 1 | |
| B3125-012-000 | THREAD TENSION NUT | 2 | |
| D2527-232-D00 | SLEEVE | 1 | |
| 141-46506 | ADJUSTING SHAFT | 1 | |
| 138-12003 | PRESSURE SPRING | 1 | |
| 138-11906 | ACCEPT PLATE, UPPER | 1 | |
| SM-5040855-SN | SCREW | 2 | |
| MAZ-15516000 | MOVING PLATE | 1 | |
| SS-9151120-CP | SCREW 15/64-28 L=I1 | 2 | |
| WP-0612516-SD | WASHER 6, 1X15,2X2.5 | 2 |
Page 47 — 22. ACCESSORIES PARTS FOR LK-1900A SUBCLASSES
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | MDP-500B1402 | NEEDLE DPX5#14-2 | 1 |
| 2 | MDP-500B1602 | NEEDLE DPX5#16-2 | 1 |
| 3 | MDP-170B2102 | NEEDLE DPX17#21-2 | 1 |
| 4 | MDP-170B1402 | NEEDLE DPX17#14-2 | 1 |
| 5 | 400-06485 | SAFETY PLATE ASM B | 1 |
| 6 | 138-89407 | SAFETY PLATE | (1) |
| 7 | 400-52810 | SAFETY PLATE INSTALLING BASE | (1) |
| 8 | SM-4040655-SP | SCREW M4 L=6 | (2) |
| 9 | SM-6041150-TP | SCREW | (2) |
| 10 | WP-0450801-SD | WASHER 4.5X10X0.8 | (2) |
| 11 | 178-48458 | BUTTON TRAY ASM. | 1 |
| 12 | 400-33635 | BUTTON TRAY BASE | 1 |
| 13 | SM-6061202-TP | SCREW M6 L=12 | 1 |
| 14 | SK-3412001-SE | WOOD SCREW D=4.1 L=20 | 2 |
| 15 | 141-46757 | BUTTON RISING BAR ASM. | 1 |
| 16 | WP-0370316-SD | WASHER 3.7X8X0.3 | (2) |
| 17 | SS-9090813-TP | SCREW 9/64-40 L=8 | (1) |
| 18 | 141-46807 | INSTALLING BASE | (1) |
| 19 | 141-46708 | BUTTON RISING BAR | (1) |
| 20 | SS-6080340-SP | SCREW 1/8-44 L=2.9 | (1) |
| 21 | 141-48852 | SMALL CLAMP JAW LEVER ASM.,R | 1 |
| 22 | MAZ~ 15507000 | SMALL CLAMP JAW LEVER ASM.,L | (1) |
| 23 | MAZ- 15509000 | SPRING, RIGHT | (1) |
| 24 | 141-48803 | PLATE K, R | (1) |
| 25 | SS-7090410-SP | SCREW 9/64-40 L= 3.5 | (1) |
| 26 | SS-2060310-SP | SCREW 3/32-56 L=3 | (1) |
| 27 | 141-48951 | SMALL CLAMP JAW LEVER ASM.,L | 1 |
| 28 | MAZ~- 15508000 | SMALL CLAMP JAW LEVER, L | (1) |
| 29 | 141-48902 | PLATE K, L | (1) |
| 30 | SS-7090410-SP | SCREW 9/64-40 L= 3.5 | (1) |
| 31 | MAZ- 15510000 | SPRING, LEFT | (1) |
| 32 | SS-2060310-SP | SCREW 3/32-56 L=3 | (1) |
Page 49 — 23. OPTION COMPONENTS (1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 135-18659 | WORK CLAMP FOOT ASM. | 1 |
| 2 | 135-18600 | WORK CLAMP FOOT, RIGHT | (1) |
| 3 | 135-18709 | WORK CLAMP FOOT, LEFT | (1) |
| 4 | 135-48557 | WORK CLAMP FOOT ASM. | 1 |
| 5 | 135-48508 | WORK CLAMP FOOT, RIGHT | (1) |
| 6 | 135-48607 | WORK CLAMP FOOT, LEFT | (1) |
| 7 | 135-48151 | CLOTH PRESSER FOOT ASM. | 1 |
| 8 | 135-48102 | WORK CLAMP FOOT, RIGHT | (1) |
| 9 | 135-48201 | WORK CLAMP FOOT LEFT | (1) |
| 10 | 135-42451 | WORK CLAMP FOOT ASM. | 1 |
| 11 | 135-42402 | WORK CLAMP FOOT, RIGHT | (1) |
| 12 | 135-42501 | WORK CLAMP FOOT, LEFT | (1) |
| 13 | 135-42964 | PRESSER ASM. | 1 |
| 14 | 135-42915 | WORK CLAMP FOOT, RIGHT | (1) |
| 15 | 135-43012 | WORK CLAMP FOOT, LEFT | (1) |
| 16 | 135-71955 | WORK CLAMP FOOT ASM. | 1 |
| 17 | 135-71906 | CLOTH PRESSER FOOT (RIGHT) | (1) |
| 18 | 135-72003 | CLOTH PRESSER FOOT (LEFT) | (1) |
| 19 | 135-61360 | WORK CLAMP FOOT ASM. | 1 |
| 20 | 135-61352 | WORK CLAMP FOOT ASM.,RIGHT | (1) |
| 21 | 135-61303 | CLOTH PRESSER FOOT (RIGHT) | (1) |
| 22 | 135-62509 | PRESSER FOOT SLIDING PLATE (R) | (1) |
| 23 | SS-1110640-TP | SCREW 11/64-40 L= 5.5 | (1) |
| 24 | 135-61451 | WORK CLAMP FOOT ASM.,LEFT | (1) |
| 25 | 135-61402 | CLOTH PRESSER FOOT (LEFT) | (1) |
| 26 | 135-62608 | PRESSER FOOT SLIDING PLATE (L) | (1) |
| 27 | SS-1110640-TP | SCREW 11/64-40 L= 5.5 | (1) |
| 28 | 141-16107 | FEED PLATE A | 1 |
| 29 | 141-16404 | FEED PLATE D | 1 |
| 30 | 141-16305 | FEED PLATE C | 1 |
| 31 | 135-48003 | FEED PLATE | 1 |
| 32 | 135-54506 | FEED PLATE | 1 |
| 33 | 141- 16602 | FEED PLATE F | 1 |
| 34 | 141-16206 | FEED PLATE B | 1 |
| 35 | 141- 16503 | FEED PLATE E | 1 |
| 36 | 141-16701 | FEED PLATE G | 1 |
| 37 | 135-33104 | FINGER GUARDE | 1 |
| 38 | 135-48300 | FINGER GUARD | 1 |
| 39 | 135-73407 | FINGER GUARD | 1 |
| 40 | 141-20000 | FINGER GUARD | 1 |
| 41 | SM-8040302-TP | SETSCREW | 1 |
| 42 | B2426-280-000 | NEEDLE HOLE GUIDE | 1 |
| 43 | B2426-280-00B | NEEDLE HOLE GUIDE B | 1 |
| 44 | 141-09607 | NEEDLE HOLE GUIDE | 1 |
| 45 | D2426-282-C00 | NEEDLE HOLE GUIDE | 1 |
| 46 | D2426-MMC-K00 | NEEDLE HOLE GUIDE | 1 |
| 47 | 141-03253 | INNER HOOK PRESSER ASM., A | 1 |
| 48 | 141-03352 | INNER HOOK PRESSER ASM., B | 1 |
| 49 | 141-03659 | SHUTTLE RACE RING ASM.,C | 1 |
| 50 | B1817-210-DAD | SHUTTLE RACE RING ASM.,D | 1 |
| 51 | 141-20109 | FEED PLATE BLANK A | 1 |
| 52 | 141-20208 | FEED PLATE BLANK B | 1 |
| 53 | 141-20505 | FEED PLATE BLANK C | 1 |
| 54 | 141-20307 | FEED PLATE BLANK D | 1 |
| 55 | 141-20406 | FEED PLATE BLANK E | 1 |
| 56 | 141-21701 | CLOTH PRESSER BLANK,R(SURFACE) | 1 |
| 57 | 141-21800 | CLOTH PRESSER BLANK,L(SURFACE) | 1 |
| 58 | 141-21909 | CLOTH PRESSER BLANK,RIGHT | 1 |
| 59 | 141-22006 | CLOTH PRESSER BLANK,LEFT | 1 |
| 60 | 141-21263 | WORK CLAMP FOOT ASM. | 1 |
| 61 | 141-21255 | WORK CLAMP FOOT ASM.,RIGHT | (1) |
| 62 | 141-21354 | WORK CLAMP FOOT ASM.,LEFT | (1) |
| 63 | WS-0451040-XP | SPRING WASHER 4.5X8.5X1 | (2) |
| 64 | SS-7110710-SP | SCREW 11/64-40 L=7 | (2) |
| 65 | 141-16800 | FEED PLATE H | 1 |
| 66 | 141-16909 | FEED PLATE I | 1 |
| 67 | 135-54803 | FEED PLATE | 1 |
| 68 | 141-37608 | WORK CLAMP FOOT A ,LEFT | 1 |
| 69 | 141-37509 | WORK CLAMP FOOT A ,RIGHT | 1 |
| 70 | 141-35305 | FINGER GUARDE | 1 |
| 71 | SM-8040302-TP | SETSCREW | 1 |
| 72 | 141-37806 | CLOTH PRESSER FOOT B ,RIGHT | 1 |
| 73 | 141-37707 | CLOTH PRESSER LOWER PLATE A | 1 |
| 74 | 141-38002 | CLOTH PRESSER LOWER PLATE B | 1 |
| 75 | 141-37905 | CLOTH PRESSER FOOT B ,LEFT | 1 |
| 76 | 400-21851 | WORK CLAMP BLANK RIGHT(PLATING) | 1 |
| 77 | 400-21853 | WORK CLAMP BLANK RIGHT(NO PLAT | 1 |
| 78 | 400-21852 | WORK CLAMP BLANK LEFT(PLATING) | 1 |
| 79 | 400-21854 | WORK CLAMP BLANK LEFT(NO PLATI | 1 |
| 80 | 400-21855 | FEED PLATE A(NO GIZA/PLATING) | 1 |
| 81 | 400-21856 | FEED PLATE B(NO GIZA/NO PLATIN | 1 |
| 82 | 400-21857 | FEED PLATE C(NO GIZA/SUS) | 1 |
| 83 | 400-21858 | FEED PLATE D(GIZA/PLATING) | 1 |
| 84 | 400-21859 | FEED PLATE E(GIZA/NO PLATING) | 1 |
| 85 | 400-21873 | FEED PLATE D9-14 | 1 |
| 86 | 400-21876 | FEED PLATE 12 | 1 |
| 87 | 400-21879 | FEED PLATE 10 | 1 |
| 88 | 400-21882 | FEED PLATE 14 | 1 |
| 89 | 400-21870 | WORK CLAMP FOOT BLANK LEFT | 1 |
| 90 | 400-21872 | WORK CLAMP FOOT D9-14 LEFT | 1 |
| 91 | 400-21869 | WORK CLAMP FOOT BLANK RIGHT | 1 |
| 92 | 400-21871 | WORK CLAMP FOOT D9-14 RIGHT | 1 |
| 93 | 400-21874 | WORK CLAMP FOOT 12 RIGHT | 1 |
| 94 | 400-21877 | WORK CLAMP FOOT 10 RIGHT | 1 |
| 95 | 400-21880 | WORK CLAMP FOOT 14 RIGHT | 1 |
| 96 | 400-21875 | WORK CLAMP FOOT 12 LEFT | 1 |
| 97 | 400-21878 | WORK CLAMP FOOT 10 LEFT | 1 |
| 98 | 400-21881 | WORK CLAMP FOOT 14 LEFT | 1 |
| 1395-18600 | WORK CLAMP FOOT, RIGHT | (1) | |
| 1356-18709 | WORK CLAMP FOOT, LEFT | (1) | |
| T35-48507 | “WORK CLAMP FOOT. LEFT | (T} | |
| 135-4815 | CLOTH PRESSER FOOT AS, | I | |
| 1356-48102 | _ WORK CLAMR FOOT, RIGHT | (1) | |
| 135-4820} | WORK CLAMR FOOT LEFT | (1) | |
| 135-4245} | WORK CLANP FOOT ASX, | i | |
| T35-42402 | WORKCLAMP FUOT, RIGHT | (1) | |
| 1356-42915 | WORK CLANP FOOT, RIGHT | (1) | |
| 1355-71955 | WORK CLANP FOOT ASE, | i | |
| 1365-72003 | CLOTH PRESSER FOOT (LEFT) | {1) | |
| T35-61503 | CLOTH PRESSER FOOT (RIGHT) | TT) | |
| T35-62608 | PRESSER FOOT SLIDING PLATE (L) | e3) | |
| 1414-16404 | FEED PLATE D | 1 | |
| 1441-16305 | FEED PLATE C | 1 | |
| T35-45003 | FEED PLATE | I | |
| 141-15206 | FEED PLATE B | i | |
| T41- 16701 | FEED PLATE G | I | |
| 136-43300 | FINGER GUARD | I | |
| 1414-26000 | FINGER GUARD | i | |
| SW-8U40507-TP | SETSCREW | I | |
| B2426-280-060 | NEEDLE HOLE GUIDE | 1 | |
| 2426 -WEC-KUU | REEDLE HOLE GUIDE | I | |
| 1414-03352 | INNER HOOK PRESSER ASK. , B | 1 | |
| BIS817-210-DAD | SHUTTLE RACE RING ASX. ,D | 1 | |
| T41-20109 | FEED PLATE BLANK A | I | |
| 1414-20208 | FEED PLATE BLANK B | I | |
| T4t-21701 | CLOTH PRESSER BLANK, RUSUREAUCE) | T | |
| 1414-21263 | WORK CLAMP FOOT ASM. | I | |
| 1413-21255 | WORK CLAMP FUOT ASW, , RIGHT | 93) | |
| 1414-21354 | WORK CLAMP FOOT ASM, , LEFT | {1) | |
| WS-0451040-KP | SPRING WASHER 4,5X8.5X1 | (2) | |
| 141-168600 | FEED PLATE H | I | |
| T4T- 16509 | FEED PLATE J | T | |
| 1365-54803 | FEED PLATE | I | |
| 4141-37608 | FORK CLAMP FOOT A ,LEFT | I | |
| 1431-35305 | FIKGER GUARDE | 1 | |
| 3W-8040302-1P | SETSCREW | I | |
| 400-2185 | WORK CLAMP BLANK RIGHT(PLATING | T | |
| 4060-21853 | WORK CLAXP BLANK RIGHT(NO PLAT | 1 | |
| 400-2856 | FEED PLATE B(RO GIZA/RO PLATIN | T | |
| 400-ZI875 | FEED PEATE IZ | T | |
| 4000-25869 | WORK CLARP FOOT BLANK RIGHT | T | |
| 4600-21871 | WORK CLAMP FOOT D9-14 RIGHT | I | |
| 4900-21877 | WORK CLAMP FOOT 10 RIGHT | I | |
| 4060-21880 | WORK CLAMP FOOT 14 RIGHT | I | |
| AWU-21875 | WORK CLAMP FOOT IZ LEFT | T | |
| 4600-21878 | WORK CLAMP FOOT 10 LEFT | I | |
| 400-2188} | FORK CLAMP FOOT 14 LEFT | 1 |
Page 51 — 24. OPTION COMPONENTS (2) (FOR LK-1902A,LK-1903A)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 135-45660 | WORK CLAMP FOOT ASM. | 1 |
| 2 | 135-47161 | WORK CLAMP FOOT ASM. | 1 |
| 3 | 135-45504 | FEED PLATE | 1 |
| 4 | 135-45801 | FEED PLATE | 1 |
| 5 | 135-47005 | FEED PLATE | 1 |
| 6 | 135-46700 | CLOTH PRESSER PLATE | 1 |
| 7 | 135-48706 | CLOTH PRESSER LOWER PLATE | 1 |
| 8 | MAZ-15701000 | GUIDE | 1 |
| 9 | MAZ-15702000 | PRESSURE PLATE | 1 |
| 10 | MAZ-157070BB | LARGE CLAMP JAW LEVER ASM.,R | 1 |
| 11 | MAZ-157070AB | LARGE CLAMP JAW LEVER ASM.,R | (1) |
| 12 | MAZ- 15709000 | SPRING,RIGHT | (1) |
| 13 | SS-7090410-SP | SCREW 9/64-40 L= 3.5 | (1) |
| 14 | MAZ-157080BB | LARGE CLAMP JAW LEVER ASM.,L | 1 |
| 15 | MAZ-157080AB | LARGE CLAMP JAW LEVER ASM.,R | (1) |
| 16 | MAZ- 15710000 | SPRING,LEFT | (1) |
| 17 | SS-7090410-SP | SCREW 9/64-40 L= 3.5 | (1) |
| 18 | 141-49603 | GUIDE | 1 |
Page 53
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 141-46054 | PICK-UP DEVICE COMPL. | 1 |
| 2 | SS-7110740-TP | SCREW 11/64-40 L=7 | (2) |
| 3 | MAZ-16012000 | LEVER SPRING HOOK | (1) |
| 4 | MAZ~- 16013000 | BUTTON SUPPORT LEVER SPRING | (1) |
| 5 | 141-46203 | PICK-UP FOOT INSTALLING BASE | (1) |
| 6 | 141-46104 | PICK-UP INSTALLING BASE | (1) |
| 7 | 141-41402 | INSTALLING SHAFT | (1) |
| 8 | RE-0700000-KO | E-RING 7 | (2) |
| 9 | MAZ- 15515000 | SLIDE BLOCK | (1) |
| 10 | 141-46401 | PRESSER PLATE | (1) |
| 11 | MAZ- 16014000 | BUTTON SUPPORT RELEASE LEVER | (1) |
| 12 | SS-7110740-TP | SCREW 11/64-40 L=7 | (1) |
| 13 | MAZ- 16011000 | BUTTON SUPPORT LEVER SHAFT | (1) |
| 14 | SS-7110740-TP | SCREW 11/64-40 L=7 | (1) |
| 15 | MAZ~ 16004000 | BUTTON CLAMP BASE | (1) |
| 16 | SS-6111052-TP | SCREW | (1) |
| 17 | WP-0482086-SD | WASHER 4.8X11.5X2 | (1) |
| 18 | MAZ~ 16005000 | BUTTON CLAMP BASE | (1) |
| 19 | SS-7090510-SP | SCREW 9/64-40 L= 4.6 | (1) |
| 20 | CS-0640811-SP | THRUST COLLAR D=6.35 W=8 | (1) |
| 21 | SS-8110410-TP | SCREW 11/64-40 L= 3.5 | (1) |
| 22 | MAZ- 16010000 | BUTTON SUPPORT LEVER | (1) |
| 23 | MAZ-160090A0 | BUTTON SUPPORT RUBBER ASM. | (1) |
| 24 | MAZ~ 16009000 | BUTTON SUPPORT RUBBER | (1) |
| 25 | B2406-372-000 | SHANK BUTTON HOLDING CLAMP | (1) |
| 26 | SS-7110740-TP | SCREW 11/64-40 L=7 | (1) |
| 27 | MAZ~ 16002000 | FEED PLATE | (1) |
| 28 | MAZ-1600300A | FEED PLATE, A | (1) |
| 29 | SS-6110480-SP | SCREW 11/64-40 L=4.3 | (1) |
| 30 | SS-9111010-SP | SCREW 11/64-40 L=9.5 | (1) |
| 31 | WP-0482086-SD | WASHER 4.8X11.5X2 | (1) |
| 32 | WP-0501016-SD | WASHER 5X10.5X1 | (2) |
| 33 | MAZ-15514000 | SUPPORT PLATE | (1) |
| 34 | 135-40901 | STATIONING BLOCK SHAFT | (1) |
| 35 | D2548-232-D00 | SNAP RING,FOR CONNECTING ROD | (1) |
| 36 | NS-6150310-SP | NUT 15/64-28 | (1) |
| 37 | SS-9110460-CP | SCREW 11/64-40 L=4 | (2) |
| 38 | SS-9621413-SP | SCREW 3/16-32 L=13.5 | (2) |
| 39 | MAZ~-16022000 | BUTTON CLAMP SUPPORT, FRONT | (1) |
| 40 | MAZ- 16023000 | BUTTON CLAMP SUPPORT, REAR | (1) |
| 41 | D1401-M1Y-C0A | NEEDLE BAR | 1 |
| 42 | MAZ-160170A0 | WIPER ASM. | 1 |
| 43 | 138-10908 | MOVING PLATE LINK A | 1 |
| 44 | SS-6090612-TP | SCREW 9/64-40 L=6 | 2 |
| 45 | MAZ- 16015000 | BUTTON SUPPORT LINK | 1 |
| 46 | SD-0640321-TP | HINGE SCREW D=6.35 H=3.2 | 1 |
| 47 | MAZ-16021000 | NEEDLE HOLE GUIDE | 1 |
| 48 | MTQ-300B1400 | NEEDLE TQX3 #14 | 1 |
| 49 | 141-48209 | BUSHING | 1 |
| 50 | 400-10103 | CONNECTING LINK | 1 |
| 51 | SL-6040892-TN | BOLT | 2 |
| DI401-M1Y-COA | NEEDLE BAR | 1 |
Page 54
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 2 | CW-3002001-B1 | CH-3012000-01 | |
| 2 | CM-1001000-01 | ||
| 4 | 400-10438 | ||
| 4 | SKH-6030500-SN | SH4¥-7030550-TP | |
| 22 | 400-03451 | ||
| 22 | 400-03452 | ||
| 22 | 400-03453 | ||
| 22 | HM-0004800-10 | KH-0000004-80 | |
| 26 | 400-06861 | ||
| 26 | 400-06862 | ||
| 26 | 400-06863 | ||
| 28 | B89118-232-000 | ||
| 28 | 135-51205 | ||
| 28 | B3121-372-000 | ||
| 28 | 139-43204 | ||
| 28 | PS-0200062-KH | ||
| 28 | $$8$-4110715-SP | ||
| 28 | SW-4040855-SP | SH-4040655-SP | |
| 28 | NS-6110310-SP | SHh-4040855-SP | |
| 28 | SD-0601021-SP | ||
| 28 | B1506-352-000 | ||
| 28 | NS-6120310-SP | ||
| 28 | WP-0740516-SP | ||
| 42 | NS-6120310-SP | ||
| 42 | WP-0740516-SP | ||
| 42 | 138-63709 | ||
| 42 | 83121-980-000 | ||
| 42 | 138-63808 | ||
| 42 | PS-0200062-KH | ||
| 42 | S$S-4110715-SP | SM-4040655-SP | |
| 42 | NS-6110310-SP | ||
| 42 | S8D-0601021-SP | ||
| 42 | B1506-352-000 | ||
| 42 | 178-48508 |
Page 55
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 21 | SS-9151210-TP | ||
| 13 | SM-6061202-TP |
Page 60 — NUMERICAL INDEX OF PARTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 400-10572 | 4 | |
| 69 | 400-10573 | 4 | |
| 75 | 400-10574 | 4 | |
| 13 | 400-10575 | 8 | |
| 10 | 400-10589 | 16 | |
| 52 | 400-10879 | 8 | |
| 22 | 400-11152 | 16 | |
| 51 | 400-11511 | 8 | |
| 48 | 400-11512 | 8 | |
| 51 | 400-11902 | 4 | |
| 79 | 400-11928 | 2 | |
| 3 | 400-11949 | 30 | |
| 17 | 400-11949 | 38 | |
| 2 | 400-12127 | 8 | |
| 13 | 400-13640 | 28 | |
| 45 | 400-13750 | 4 | |
| 45 | 400-13967 | 10 | |
| 49 | 400-14963 | 8 | |
| 68 | 400-14965 | 8 | |
| 5 | 400-15800 | 16 | |
| 10 | 400-16077 | 8 | |
| 32 | 400-16194 | 28 | |
| 11 | 400-16195 | 28 | |
| 42 | 400-17202 | 6 | |
| 76 | 400-21851 | 44 | |
| 78 | 400-21852 | 44 | |
| 77 | 400-21853 | 44 | |
| 79 | 400-21854 | 44 | |
| 80 | 400-21855 | 44 | |
| 81 | 400-21856 | 44 | |
| 82 | 400-21857 | 44 | |
| 83 | 400-21858 | 44 | |
| 84 | 400-21859 | 44 | |
| 91 | 400-21869 | 44 | |
| 89 | 400-21870 | 44 | |
| 92 | 400-21871 | 44 | |
| 90 | 400-21872 | 44 | |
| 85 | 400-21873 | 44 | |
| 93 | 400-21874 | 44 | |
| 96 | 400-21875 | 44 | |
| 86 | 400-21876 | 44 | |
| 94 | 400-21877 | 44 | |
| 97 | 400-21878 | 44 | |
| 87 | 400-21879 | 44 | |
| 95 | 400-21880 | 44 | |
| 98 | 400-21881 | 44 | |
| 88 | 400-21882 | 44 | |
| 11 | 400-23831 | 6 | |
| 17 | 400-26818 | 4 | |
| 55 | 400-28015 | 4 | |
| 83 | 400-28015 | 4 | |
| 39 | 400-28015 | 26 | |
| 1 | 400-29901 | 14 | |
| 30 | 400-29901 | 26 | |
| 5 | 400-29902 | 14 | |
| 31 | 400-29902 | 26 | |
| 1 | 400-29903 | 6 | |
| 32 | 400-29903 | 26 | |
| 11 | 400-31136 | 4 | |
| 22 | 400-33047 | 38 | |
| 12 | 400-33635 | 42 | |
| 12 | 400-36110 | 28 | |
| 80 | 400-39012 | 14 | |
| 41 | 400-39013 | 14 | |
| 39 | 400-39255 | 14 | |
| 6 | 400-40256 | 6 | |
| 1 | 400-48536 | 28 | |
| 7 | 400-52810 | 42 | |
| 1 | 400-55355 | 22 | |
| 2 | 400-55356 | 22 | |
| 3 | 400-55357 | 22 |
Juki LK-1900A — parts catalog
- Page 1 (cover): This is the cover page for the JUKI LK-1900A Series Computer-controlled High-speed Bar-tacking Industrial Sewing Machine Parts List.
- Page 2 (unknown): This page is blank except for a watermark and a footer.
- Page 3 (text): This page provides instructions on how to use the parts list, explaining codes, quantity column interpretations, and symbols for subparts and assembly structures.
- Page 4 (toc): This page is a table of contents for a parts catalog, listing various components and their corresponding page numbers.
- Page 5 (toc): This page is a table of contents listing various sections related to exclusive parts, accessories, option components, and information on changes for different LK series models, along with their corresponding page numbers.
- Page 6 (diagram): This page displays a diagram of frame and miscellaneous cover components for an industrial sewing machine, with various parts labeled with reference numbers.
- Page 7 (parts_list): This page lists parts for an industrial sewing machine, including covers, screws, plates, springs, and various other components with their part numbers and quantities.
- Page 8 (diagram): This page illustrates the main shaft and needle bar components of an industrial sewing machine, showing an exploded view with reference numbers for each part.
- Page 9 (parts_list): This page lists parts for an industrial sewing machine, including main shaft, bearings, screws, and various other components, with their corresponding part numbers, descriptions, and quantities.
- Page 10 (diagram): This page illustrates the components of the presser lifter and wiper assembly for an industrial sewing machine.
- Page 11 (parts_list): This page lists various parts for an industrial sewing machine, including screws, nuts, shafts, links, arms, and washers, with their corresponding part numbers, descriptions, and quantities.
- Page 12 (diagram): This page illustrates the components of the shuttle driver shaft assembly, including various shafts, gears, and related parts.
- Page 13 (parts_list): This page lists parts for a sewing machine, including cable clips, oil pipe holders, screws, thrust collars, bearings, shafts, and various shuttle components.
- Page 14 (diagram): This page displays a diagram of thread tension components for an industrial sewing machine, with various parts labeled with reference numbers.
- Page 15 (parts_list): This page lists parts for an industrial sewing machine, including solenoids, screws, springs, washers, links, bearings, nuts, shafts, disks, and other components, with their respective part numbers, descriptions, and quantities.
- Page 16 (diagram): This page illustrates the components of the thread trimmer mechanism for an industrial sewing machine, showing various parts and their assembly.
- Page 17 (parts_list): This page lists parts related to the thread trimmer, needle plate, and moving knife assemblies, including screws, washers, shafts, and various guides and levers.
- Page 18 (diagram): This page illustrates the components of the feed mechanism for an industrial sewing machine, showing an exploded view of various parts and their reference numbers.
- Page 19 (parts_list): This page lists parts for an industrial sewing machine, including various screws, motors, gears, arms, plates, sensors, and other components, with their corresponding part numbers, descriptions, and quantities.
- Page 20 (diagram): This page illustrates the components of the TC clamp assembly for an industrial sewing machine.
- Page 21 (parts_list): This page lists various parts for an industrial sewing machine, including clamps, plates, screws, washers, and sensors, with their part numbers, descriptions, and quantities.
- Page 22 (parts_list): This page illustrates and lists sensor components for an industrial sewing machine, including various sensor cables, safety switch assemblies, screws, and other related parts.
- Page 23 (diagram): This page illustrates the components of a thread stand assembly, including various parts like spool retainers, pins, cushions, rests, and associated hardware, with a corresponding parts list.
- Page 24 (diagram): This page illustrates the components of a table stand for an industrial sewing machine, specifically for models JT-K44, with a detailed exploded view showing various parts and their reference numbers.
- Page 25 (parts_list): This page lists parts for a sewing machine, including various screws, washers, nuts, stand components, and drawer parts, with their corresponding part numbers, descriptions, and quantities.
- Page 26 (diagram): This page displays a diagram of control box components, with numbered parts and their corresponding references.
- Page 27 (parts_list): This page lists parts for a control box assembly, including screws, nuts, washers, PCBs, motors, and cords, with reference numbers, part numbers, descriptions, and quantities.
- Page 28 (diagram): This page displays a diagram of operation panel components, including various buttons, displays, and mounting hardware, with reference numbers for each part.
- Page 29 (parts_list): This page lists parts for an operation box assembly, including screws, panels, cases, and electrical components like fuses and cables, with reference numbers, part numbers, descriptions, and quantities.
- Page 30 (diagram): This page displays a wiring diagram for the sewing machine, illustrating electrical connections and components like motors, sensors, and control boards.
- Page 31 (parts_list): This page lists various control boxes, PCBs, cords, cables, motors, and solenoids with their corresponding part numbers and descriptions. It also includes a key for 'NOTE' codes.
- Page 32 (diagram): This page displays a diagram of accessory part components for a JUKI sewing machine, with numbered illustrations of various parts and hardware.
- Page 33 (parts_list): This page lists various parts for sewing machines, including covers, plates, screws, bolts, washers, and specialized tools, with part numbers, descriptions, and quantities. It also includes notes specifying compatibility with different JUKI machine models like LK-1900AS, LK-1900AF, and LK-1900AH.
- Page 34 (diagram): This page displays exclusive parts for the LK-1901AS sewing machine, including various components like levers, brackets, screws, and springs, identified by reference numbers.
- Page 35 (parts_list): This page lists various parts for industrial sewing machines, including part numbers, descriptions, and quantities. It also notes that parts not listed are the same as those used in the LK-1900A standard model.
- Page 36 (unknown): This page contains exclusive parts for the LK-19014S and LK-1901ASH AMAA sewing machines.
- Page 37 (parts_list): This page lists parts for a sewing machine, including reference numbers, part numbers, descriptions, and quantities. It also notes that parts not listed are the same as those used in the LK-1900A standard model.
- Page 38 (diagram): This page displays a diagram of exclusive parts for LK-1902AS and LK-1902AH sewing machines, with numbered components indicated.
- Page 39 (parts_list): This page lists parts for sewing machine models LK-1902AS and LK-1902AH, including thread guides, screws, needles, and various assemblies like the wiper and shuttle. It also notes that parts not otherwise specified are the same as those used in the LK-1900A standard model.
- Page 40 (unknown): This page contains miscellaneous text and symbols, with no discernible parts list or structured information.
- Page 41 (parts_list): This page lists parts for a T-STAND assembly, including various stands, studs, struts, supports, nuts, washers, screws, and pedal components, with part numbers, descriptions, and quantities.
- Page 42 (text): This page lists exclusive parts for the LK-1903AS-301 and LK-1903AS-302 sewing machines, with part numbers and quantities provided.
- Page 43 (parts_list): This page lists parts for sewing machines, including part numbers, descriptions, and quantities. It also contains notes regarding specific models and part variations.
- Page 44 (text): This page lists exclusive parts for the LK-1903AS-301 and LK-1903AS-302 sewing machine models.
- Page 45 (parts_list): This page lists parts for sewing machine models LK-1903AS-301 and LK-1903AS-302, with other parts being common to the LK-1900A standard model. It includes part numbers, descriptions, and quantities.
- Page 46 (diagram): This page displays a diagram of accessory parts for the LK-1900A subclasses, including various components like trays, levers, screws, and clips, with reference numbers for each part.
- Page 47 (parts_list): This page lists parts for sewing machines, including needles, safety plates, screws, washers, and levers, with their corresponding part numbers and descriptions. It also includes notes indicating which machine models each part is applicable to.
- Page 48 (diagram): This page displays a diagram of option components (1) for an industrial sewing machine, with various parts numbered from 1 to 98.
- Page 49 (parts_list): This page lists various work clamp feet, presser feet, feed plates, finger guards, needle hole guides, and shuttle race rings, along with their part numbers and quantities.
- Page 50 (diagram): This page displays a diagram of option components (2) for models LK-1902A and LK-1903A, with numbered parts indicated.
- Page 51 (parts_list): This page lists parts for sewing machines, including reference numbers, part numbers, descriptions, and quantities. It specifies parts for models LK-1902A and LK-1903A.
- Page 52 (text): This page lists optional components for shank button sewing, specifically for models LK-1903A and LK-1908A, with a page number of 49.
- Page 53 (parts_list): This page lists parts for a sewing machine, including reference numbers, part numbers, descriptions, and quantities. It covers items from reference number 1 to 51.
- Page 54 (text): This page lists information about changes to parts, including added and obsoleted parts, with revision numbers, page references, and part numbers.
- Page 55 (parts_list): This page contains a parts list for sewing machine components, detailing part numbers, descriptions, and associated reference and page numbers.
- Page 56 (text): This page contains an index of parts for an industrial sewing machine, listing part numbers, page numbers, and reference numbers in a tabular format across three columns.
- Page 57 (text): This page contains a numerical index of parts for an industrial sewing machine, listing part numbers, page references, and reference numbers across multiple columns.
- Page 58 (text): This page contains a numerical index of parts, listing part numbers, page numbers, and reference numbers. It is organized into multiple columns for easy lookup.
- Page 59 (parts_list): This page contains a numerical index of parts for an industrial sewing machine, listing part numbers, page numbers, and reference numbers across multiple columns.
- Page 60 (parts_list): This page contains a numerical index of parts for an industrial sewing machine, listing part numbers, page references, and reference numbers from diagrams.
- Page 61 (text): This page contains the heading "ME MO" followed by ruled lines for notes and a page number at the bottom.
- Page 62 (text): This page contains the heading "ME MO" and several horizontal lines, suggesting it is a memo or notes page. It also includes a page number "- 57 -" and a website address "jintex.in" at the bottom.
- Page 63 (unknown): This page contains a watermark with the text "jintex.in". There is no other discernible content on the page.
- Page 64 (cover): This is the cover page of the JUKI CORPORATION parts catalog, featuring the JUKI logo and copyright information.