Yamato CZ6000 Parts Book (PDF)
Text index — Yamato CZ6000
Page 5 — MISCELLANEOUS COVERS(1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200066 | Cloth Plate | 1 |
| 2 | 6200302 | Cloth Plate(Lower) | 1 |
| 3 | 6200072 | Rubber Cushion | 1 |
| 4 | 001123 | Washer | 3 |
| 5 | 000644 | Spring Washer | 3 |
| 6 | 110045 | Screw(M4-0.7 x 12) | 3 |
| 7 | 6200070 | Cloth Plate Eccentric Bushing | 1 |
| 8 | 160001 | Screw(M4-0.7 x 4) | 1 |
| 9 | 6200071 | Collar(4 x 9 x 6mm) | 1 |
| 10 | 003637 | Screw(1/8-44 x 2.5) | 1 |
| 11 | 6200529 | Cloth Plate Latch, C. Set | 1 |
| 12 | 110073 | Screw(M4-0.7 x 5) | 2 |
| 13 | 100001 | Lock Nut | 1 |
| 14 | 110031 | Stop Screw(M4-0.7 x 12) | 1 |
| 15 | 6200015 | Oil Cap | 1 |
| 16 | 6200016 | O-ring(P28) | 1 |
| 17 | 6200078 | Top Cover | 1 |
| 18 | 110016 | Screw(M4-0.7 x 15) | 6 |
| 19 | 6200228 | Top Cover Gasket | 1 |
| 20 | 6200172 | Oil Reservoir Gasket | 1 |
| 21 | 6200309 | Oil Reservoir | 1 |
| 22 | 006816 | Screw(1/4-24 x 8) | 4 |
| 23 | 6200029 | OilReservoirRubberCushion(Black-colored) | 3 |
| 24 | 6200033 | OilReservoirRubberCushion(Green-colored) | 1 |
| 26 | 6200182 | Oil Reservoir Positioning Bar | 4 |
| 27 | 300004 | Washer | 4 |
| 28 | 120017 | Screw(M5-0.8 x 15) | 6 |
| 29 | 6100029 | Drain Hole Seal | 1 |
| 30 | 005075 | Drain Hole Screw(3/8-24 x 8) | 1 |
| 32 | 6200512 | Wind Guide Plate | 1 |
| 33 | 110013 | Screw(M4-0.7 x 8) | 2 |
| 34 | 300043 | Washer | 2 |
| 35 | 6209401 | Serial Number Plate | 1 |
| 36 | 000726 | Rivet | 2 |
| 37 | 6200530 | Cloth Plate Latch Holder | 1 |
| 38 | 6200531 | Cloth Plate Latch | 1 |
| 39 | 6200532 | Cloth Plate Latch Spring | 1 |
| 40 | 170067 | Screw(M5-0.8 x 6) | 1 |
Page 7 — MISCELLANEOUS COVERS (2)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200465 | Side Cover | 1 |
| 2 | 110013 | Screw(M4-0.7 × 8) | 6 |
| 4 | 6200220 | Eye Guard Holder | 1 |
| 5 | 170032 | Screw(M4-0.7 × 5) | 1 |
| 6 | 000010 | Conical Spring Washer | 2 |
| 7 | 6200285 | Eye Guard | 1 |
| 8 | 110076 | Screw(M3-0.5 × 6) | 2 |
| 9 | 000444 | Washer | 2 |
| 10 | 6200225 | Needle Bar Oil Defender | 1 |
| 11 | 110012 | Screw(M4-0.7 × 5) | 4 |
| 12 | 6200226 | Needle Bar Oil Seal | 1 |
| 13 | 190015 | Screw(M14-2 × 6) | 2 |
| 14 | 6200227 | Logo Plate | 1 |
| 15 | 110106 | Screw(M4-0.7 × 8) | 2 |
| 16 | 6200375 | Tape Guide(Upper) | 1 |
| 17 | 000538 | Washer | 2 |
| 19 | 6200159 | Front Cover Latch Spring | 1 |
| 20 | 6200027 | Front Cover Hook | 1 |
| 21 | 001203 | Screw(9/64-40 × 4.5) | 1 |
| 22 | 6200017 | Front Cover Hinge Pin | 1 |
| 23 | 003637 | Screw(1/8-44 × 2.5) | 2 |
| 24 | 6200073 | Front Cover(Right) | 1 |
| 25 | 6200024 | Front Cover Hinge Spring | 1 |
| 26 | 6200310 | Front Cover Hinge | 1 |
| 27 | 6200156 | Chip Guard(Openable) | 1 |
| 28 | 110003 | Screw(M3.5-0.6 × 6) | 2 |
| 31 | 6200170 | Front Cover Latch | 1 |
| 32 | 110054 | Screw(M3-0.5 × 3.5) | 2 |
Page 9 — MISCELLANEOUS COVERS (3)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200075 | Feed Mechanism Cover | 1 |
| 2 | 6200192 | Feed Mechanism Cover Gasket | 1 |
| 3 | 110048 | Screw(M4-0.7 × 10) | 5 |
| 4 | 6200077 | Rubber Cushion | 1 |
| 5 | 6200212 | O-ring(P52) | 1 |
| 6 | 6200211 | Ball Bearing Holder | 1 |
| 7 | 110013 | Screw(M4-0.7 × 8) | 7 |
| 8 | 6200511 | Fan Cover | 1 |
| 9 | 110012 | Screw(M4-0.7 × 5) | 2 |
| 10 | 150004 | Screw(M4-0.7 × 6) | 1 |
| 11 | 6200209 | Seal Plug | 2 |
| 12 | 6200224 | Pushbutton | 1 |
| 13 | 6200171 | Oil Seal | 1 |
| 14 | 6100333 | Retaining Ring | 2 |
| 15 | 6200036 | Pushbutton Spring | 1 |
| 16 | 330008 | Seal Plug | 1 |
| 17 | 330000 | Seal Plug | 1 |
| 18 | 6200219 | Fabric Guide Plate | 1 |
| 19 | 110064 | Screw(M4-0.7 × 8) | 2 |
| 20 | 6200191 | Tail Cover Gasket | 1 |
| 21 | 6200076 | Tail Cover | 1 |
| 22 | 6200259 | Seal Plug | 1 |
| 23 | 6200180 | Ball Bearing Housing | 1 |
| 24 | 6200181 | Ball Bearing Housing Gasket | 1 |
| 25 | 130003 | Screw(M4-0.7 × 7.3) | 3 |
Page 11 — MISCELLANEOUS THREAD EYELETS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200079 | Thread Guide Plate | 1 |
| 2 | 110013 | Screw(M4-0.7 × 8) | 2 |
| 3 | 6100056 | Thread Tension Spring Cap | 4 |
| 4 | 6100057 | Tension Spring Bushing | 4 |
| 5 | 6200026 | Lower Looper Thread Tension Spring | 1 |
| 6 | 6200019 | Thread Tension Spring Retainer | 4 |
| 7 | 000178 | Felt | 4 |
| 8 | 6100062 | Tension Disc | 8 |
| 9 | 000177 | Felt | 4 |
| 10 | 190016 | Tension Post(Short) | 4 |
| 11 | 6200031 | Tension Disc Eyelet | 3 |
| 12 | 6100059 | Upper Looper Thread Tension Spring | 1 |
| 13 | 6200032 | Needle Thread Tension Spring | 1 |
| 14 | 6200025 | Needle Thread Tension Spring | 1 |
| 15 | 6200277 | Tension Disc Eyelet for Needle Thread | 1 |
| 16 | 6200447 | Oil Container | 1 |
| 17 | 6200448 | Oil Container Plug | 1 |
| 18 | 310105 | Felt | 1 |
| 19 | 6200449 | Felt Holder | 1 |
| 20 | 110013 | Screw(M4-0.7 × 8) | 1 |
| 21 | 6200284 | Needle Thread Eyelet Holder | 1 |
| 22 | 110001 | Screw(M4-0.7 × 5.4) | 3 |
| 23 | 6200276 | Needle Thread Eyelet(Right) | 1 |
| 24 | 006035 | Screw(9/64-40 × 7) | 1 |
| 25 | 000644 | Spring Washer | 1 |
| 26 | 000322 | Nut | 1 |
| 27 | 6200275 | Needle Thread Eyelet(Left) | 1 |
| 28 | 6200272 | Needle Thread Pull-off | 1 |
| 29 | 110064 | Screw(M4-0.7 × 8) | 1 |
| 30 | 000653 | Knock Pin | 1 |
| 31 | 6200466 | Thread Retainer Plate Support | 1 |
| 32 | 6200467 | Thread Retainer Plate | 1 |
| 33 | 6200468 | Thread Retainer Spring | 1 |
| 34 | 170060 | Screw(M2.5-0.45 × 4) | 1 |
| 35 | 6200229 | Looper Crank Cover | 1 |
| 36 | 110009 | Screw(M4-0.7 × 8) | 1 |
| 37 | 6100111 | Looper Driving Shaft Oil Seal | 1 |
| 38 | 6200164 | Spacer(Rubber) | 1 |
| 39 | 6200280 | Looper Thread Eyelet(Left) | 1 |
| 40 | 110035 | Screw(M4-0.7 × 10) | 3 |
| 41 | 6200283 | Thread Eyelet Support | 1 |
| 42 | 6200282 | Lower Looper Thread Eyelet | 1 |
| 43 | 6200439 | Upper Looper Thread Eyelet | 1 |
| 44 | 000014 | Washer | 2 |
| 45 | 110026 | Screw(M3-0.5 × 6) | 2 |
| 46 | 6200023 | Looper Thread Pipe | 2 |
| 47 | 000644 | Spring Washer | 1 |
Page 13 — MISCELLANEOUS CRANKSHAFT & BUSHINGS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200305 | Machine Pulley | 1 |
| 2 | 160007 | Screw(M6-1 x 6) | 6 |
| 3 | 6200477 | Oil Cooling Fan | 1 |
| 4 | 160001 | Screw(M4-0.7 x 4) | 3 |
| 5 | 6200214 | Wave Washer | 1 |
| 6 | 6200213 | Mechanical Oil Shield | 1 |
| 7 | 6100622 | Crankshaft Ball Bearing(Right) | 1 |
| 8 | 6100127 | Bearing Adapter | 1 |
| 9 | 6200268 | Oil Pump Driving Worm | 1 |
| 10 | 6200373 | Crankshaft Bushing | 1 |
| 11 | 6200270 | Crankshaft | 1 |
| 12 | 6200560 | Pin | 1 |
| 14 | 160027 | Screw(M3-0.5 x 3) | 5 |
| 15 | 6200179 | Crankshaft Ball Bearing(Left) | 1 |
| 16 | 6200569 | Crankshaft Bushing | 1 |
| 17 | 6200083 | Upper Knife Driving Shaft Bushing(Right) | 1 |
| 18 | 6200238 | Upper Knife · Feed Bar Driving Shaft Bushing | 2 |
| 19 | 6200084 | Upper Knife Driving Shaft Oil Seal | 1 |
| 20 | 6200244 | Needle Bar Driving Shaft Bushing(Right) | 1 |
| 21 | 6200243 | Needle Bar Driving Shaft Bushing(Left) | 1 |
| 22 | 003636 | Cap Screw(5/16-32 x 3.5) | 1 |
| 23 | 000526 | Gasket | 1 |
| 25 | 310109 | Oil Wick | 1 |
| 27 | 6200241 | Upper Looper Driving Shaft Bushing(Front) | 1 |
| 28 | 6200242 | UpperLooperDrivingShaftBushing(Rear) | 1 |
| 29 | 6200132 | Looper Driving Shaft Oil Seal | 1 |
| 30 | 6200239 | Lower Looper Driving Shaft Bushing(Front) | 1 |
| 31 | 6200240 | Lower Looper Driving Shaft Bushing(Rear) | 1 |
| 32 | 6200237 | Feed Bar Driving Shaft Bushing(Left) | 1 |
| 33 | 6200259 | Seal Plug | 1 |
| 34 | 6200081 | Control Lever Shaft Bushing | 1 |
| 35 | 160001 | Screw(M4-0.7 x 4) | 2 |
Page 15 — NEEDLE BAR DRIVING MECHANISM / 針棒機構
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200271 | Needle Bar Driving Connecting Rod | 1 |
| 2 | 120049 | Screw(M4-0.7 × 16) | 2 |
| 3 | 6200088 | Needle Bar Driving Connecting Rod Pin | 1 |
| 4 | 160002 | Screw(M4-0.7 × 5) | 1 |
| 5 | 6200187 | Needle Bar Driving Lever | 1 |
| 6 | 120006 | Screw(M6-1 × 12) | 1 |
| 7 | 6200086 | Collar(12 × 20 × 10mm) | 1 |
| 8 | 160003 | Screw(M5-0.8 × 5) | 2 |
| 9 | 6200307 | Needle Bar Crank Arm, C. Set | 1 |
| 10 | 6200568 | Needle Bar Driving Shaft | 1 |
| 11 | 6200085 | Needle Bar Crank Arm | 1 |
| 12 | 300008 | Washer | 1 |
| 13 | 140003 | Screw(M6-1 × 18) | 1 |
| 14 | 6200087 | Needle Bar Connecting Link | 1 |
| 15 | 6200101 | Needle Bar Connecting Link Pin | 2 |
| 16 | 310089 | Oil Wick | 2 |
| 17 | 6200246 | Needle Bar Connecting Bracket | 1 |
| 18 | 110006 | Screw(M3.5-0.6 × 10) | 1 |
| 19 | 160016 | Screw(M4-0.7 × 4.5) | 2 |
| 20 | 6200245 | Needle Bar & Needle Bar Bushing, C. Set | 1 |
| 21-1 | 6209103 | Needle Clamp(Y) | 1 |
| 21-2 | 6209102 | Needle Clamp(X) | 1 |
| 23 | 001900 | Screw(1/8-44 × 2.5) | 2 |
| 24 | 6200249 | Stitch Plate Support Stay, C. Set | 1 |
| 25 | 6200250 | Stitch Plate Support Stay | 1 |
| 26 | 000035 | Roll Pin | 1 |
| 27 | 110009 | Screw(M4-0.7 × 8) | 6 |
| 28 | 6200153 | Stitch Plate Support(Rear) | 1 |
| 29 | 110001 | Screw(M4-0.7 × 5.4) | 1 |
| 30-1 | 6208000 | Stitch Plate(Y5) | 1 |
| 30-2 | 6208002 | Stitch Plate(Y6) | 1 |
| 30-3 | 6208012 | Stitch Plate(X4) | 1 |
| 30-4 | 6208025 | Stitch Plate(X5) | 1 |
| 31 | 005345 | Screw(11/64-40 × 8.3) | 2 |
| 32 | 6200089 | Stitch Plate Support(Front) | 1 |
| 33 | 110011 | Screw(M5-0.8 × 10) | 2 |
| 34 | 6100020 | Rubber Cushion | 1 |
| 35 | 6209200 | Needle Guard(Front) | 1 |
| 36 | 110002 | Screw(M3-0.5 × 5) | 1 |
| 37 | 6200232 | HR Unit, Complete Set | 1 |
| 38 | 6100310 | Tube Joint | 1 |
| 39 | 6200090 | Oil Tube(70mm) | 1 |
| 40 | 310005 | Oil Wick | 1 |
Page 17 — NEEDLE BAR DRIVING MECHANISM
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 41 | 6200155 | HR Felt Holder | 1 |
| 42 | 310001 | HR Felt | 1 |
| 43 | 6200157 | HR Felt Holder Bracket, C. Set | 1 |
| 44 | 6200158 | HR Felt Holder Bracket | 1 |
| 45 | 000393 | Roll Pin | 1 |
| 46 | 110013 | Screw(M4-0.7×8) | 1 |
| 47 | 320008 | Fitting Stud(Short) | 1 |
| 48 | 000567 | Seal | 1 |
| 49 | 6200296 | HR Unit Bracket | 1 |
Page 19 — KNIFE DRIVING MECHANISM / メス機構
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200091 | Upper Knife Driving Connecting Rod | 1 |
| 2 | 120049 | Screw(M4-0.7 × 16) | 2 |
| 3 | 6100367 | Driving Lever Pin | 1 |
| 4 | 160002 | Screw(M4-0.7 × 5) | 1 |
| 5 | 6200093 | Upper Knife Driving Lever | 1 |
| 6 | 120006 | Screw(M6-1 × 12) | 1 |
| 7 | 6200092 | Collar(10 × 19 × 9mm) | 1 |
| 8 | 160003 | Screw(M5-0.8 × 5) | 2 |
| 9 | 6200251 | Upper Knife Driving Shaft | 1 |
| 10 | 6200095 | Upper Knife Holder Positioner | 1 |
| 11 | 6200094 | Upper Knife Holder(Flat Type) | 1 |
| 12 | 110035 | Screw(M4-0.7 × 10) | 1 |
| 13 | 6200022 | Upper Knife(Flat Type) | 1 |
| 14 | 000532 | Washer | 1 |
| 15 | 110004 | Screw(M3-0.6 × 8) | 1 |
| 16 | 6200681 | Seal Plug | 1 |
| 17 | 6200222 | Lower Knife Holder Spring Stop | 1 |
| 18 | 110012 | Screw(M4-0.7 × 5) | 3 |
| 19 | 6200100 | Cloth Plate Rubber Cushion | 1 |
| 20 | 6200221 | Front Cover | 1 |
| 21 | 110001 | Screw(M4-0.7 × 5.4) | 2 |
| 22 | 180040 | Cloth Plate Spring Pin | 1 |
| 23 | 6200223 | Lower Knife Holder Locking Plate | 1 |
| 24 | 6200030 | Lower Knife Holder Spring | 1 |
| 25 | 6200096 | Lower Knife Holder | 1 |
| 26 | 110046 | Screw(M5-0.8 × 12) | 1 |
| 27 | 000688 | Guide Pin | 1 |
| 28 | 6200097 | Lower Knife | 1 |
| 29 | 6200098 | Lower Knife Clamp | 1 |
| 30 | 140014 | Screw(M4-0.7 × 8) | 1 |
Page 21 — PRESSER FOOT MECHANISM
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 190088 | Adjusting Screw(M10-0.75 × 30) | 1 |
| 2 | 100073 | Lock Nut | 1 |
| 3 | 6200469 | Presser Spring | 1 |
| 4 | 6200470 | Presser Bar | 1 |
| 5 | 6200160 | Presser Arm Positioning Guide Pin | 1 |
| 6 | 340061 | Pin | 1 |
| 7 | 6200472 | Presser Arm Stop | 1 |
| 8 | 110012 | Screw(M4-0.7 × 5) | 1 |
| 9 | 6200473 | Presser Foot Release Lever | 1 |
| 10 | 6200474 | Presser Foot Release Lever Spring | 1 |
| 11 | 170045 | Screw(M4-0.7 × 5) | 1 |
| 12 | 180001 | Screw(M4-0.7 × 4.5) | 1 |
| 13 | 6200513 | Presser Foot Lifter Lever | 1 |
| 15 | 170065 | Screw(M8-1.25 × 10) | 1 |
| 16 | 6200291 | Presser Foot Lifter Lever Stop | 1 |
| 17 | 120010 | Screw(M6-1 × 10) | 1 |
| 18 | 6200514 | Presser Foot Lifter Lever Link | 1 |
| 19 | 6200154 | Presser Foot Shaft Collar | 1 |
| 20 | 120017 | Screw(M5-0.8 × 15) | 1 |
| 21 | 6200104 | Intermediate Lever | 1 |
| 22 | 110065 | Stop Screw(M4-0.7 × 12) | 1 |
| 23 | 100001 | Lock Nut | 1 |
| 24 | 6200288 | Presser Foot Lifter Lever Spring | 1 |
| 25 | 6200082 | Presser Foot Shaft Bushing | 1 |
| 26 | 160007 | Screw(M6-1 × 6) | 1 |
| 27 | 6200527 | Presser Arm, Complete Set | 1 |
| 28 | 6200103 | Presser Foot Shaft | 1 |
| 29 | 6200528 | Presser Arm | 1 |
| 30 | 6200106 | Presser Arm Hinge Pin | 1 |
| 31 | 160001 | Screw(M4-0.7 × 4) | 1 |
| 32-1 | 6207021 | Presser Foot, C. Set(Y5, Y6) | 1 |
| 32-2 | 6207060 | Presser Foot, C. Set(X4) | 1 |
| 32-3 | 6207094 | Presser Foot, C. Set(X4/B3)(Extra) | 1 |
| 33 | 6207001 | Presser Foot Hinge | 1 |
| 34 | 110004 | Screw(M3.5-0.6 × 8) | 1 |
| 35 | 6207003 | Presser Foot Half-stay | 1 |
| 36 | 110050 | Screw(M3.5-0.6 × 4.5) | 1 |
| 37 | 6207019 | Presser Foot(Lower) | 1 |
| 38 | 6200034 | Thread Chain Guide | 1 |
| 39 | 004237 | Screw(3/32-56 × 2.6) | 1 |
| 40-1 | 6207022 | Presser Foot Stitch Tongue(Y5, Y6) | 1 |
| 40-2 | 6207051 | PresserFootStitchTongue(X4) | 1 |
| 40-3 | 6207095 | PresserFootStitchTongue(X4/B3)(Extra) | 1 |
Page 23 — PRESSER FOOT MECHANISM
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 41 | 6207000 | Finger Guard | 1 |
| 42 | 000444 | Washer | 1 |
| 43 | 005036 | Screw(1/8-44 × 5.6) | 1 |
| 44 | 6207018 | Presser Foot Tape Guide | 1 |
| 45 | 001230 | Screw(3/32-56 × 3.8) | 1 |
| 46 | 6200020 | Thread Chain Cutting Knife | 1 |
| 47 | 004097 | Screw(3/32-56 × 4.2) | 1 |
| 48 | 6200471 | Presser Bar, C. Set | 1 |
| 49 | 6207002 | Presser Foot(Lower) | 1 |
| 50-1 | 6207044 | Presser Foot, C. Set(Y5, Y6) | 1 |
| 50-2 | 6207061 | Presser Foot, C. Set(X4) | 1 |
| 50-3 | 6207092 | Presser Foot, C. Set(X5) | 1 |
| 51-1 | 6207046 | Presser Foot Stitch Tongue(Y5, Y6) | 1 |
| 51-2 | 6207057 | Presser Foot Stitch Tongue(X4) | 1 |
| 51-3 | 6207093 | Presser Foot Stitch Tongue(X5) | 1 |
Page 25 — UPPER LOOPER DRIVING MECHANISM
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200188 | Looper Driving Lever Connecting Rod | 1 |
| 2 | 120049 | Screw(M4-0.7 × 16) | 4 |
| 3 | 6200080 | Connecting Rod Swing-proof | 2 |
| 4 | 6200261 | Upper Looper Driving Lever | 1 |
| 5 | 120006 | Screw(M6-1 × 12) | 1 |
| 6 | 6200260 | Looper Driving Shaft | 1 |
| 7 | 6200262 | Driving Shaft Thrust Ring | 1 |
| 8 | 6200263 | Driving Shaft Thrust Ring | 1 |
| 9 | 6200566 | Collar | 1 |
| 10 | 120049 | Screw(M4-0.7 × 16) | 1 |
| 11 | 6200286 | Upper Looper Thread Pull-off | 1 |
| 12 | 110009 | Screw(M4-0.7 × 8) | 1 |
| 13 | 6200117 | Upper Looper Bar Crank Arm, C. Set | 1 |
| 14 | 6200114 | Upper Looper Bar Guide Bushing | 1 |
| 15 | 6200110 | Upper Looper Bar Guide Cover | 1 |
| 16 | 130001 | Screw(M2.5-0.45 × 6) | 1 |
| 17 | 110071 | Screw(M2.5-0.45 × 6) | 1 |
| 18 | 6200116 | Upper Looper Bar Guide,Complete Set | 1 |
| 19 | 6200111 | Upper Looper Bar Crank Arm | 1 |
| 20 | 300008 | Washer | 1 |
| 21 | 140004 | Screw(M6-1 × 16) | 1 |
| 22 | 6200113 | Upper Looper Bar Crank Arm Pin | 1 |
| 23 | 160002 | Screw(M4-0.7 × 5) | 1 |
| 24 | 310089 | Oil Wick | 1 |
| 25 | 6200112 | Upper Looper Bar | 1 |
| 26 | 000629 | Seal Plug | 1 |
| 27 | 6200115 | Upper Looper Bar Guide | 1 |
| 28 | 310065 | Oiling Felt | 1 |
| 29 | 6209300 | Upper Looper(for Needle Size #9~14) | 1 |
| 30 | 210009 | Screw(1/8-44 × 3.2) | 1 |
| 32 | 120013 | Screw(M6-1 × 15) | 2 |
| 33 | 6200169 | Upper Looper Supplementary Thread Eyelet | 1 |
| 34 | 6200278 | Lower Looper Thread Pull-off | 1 |
| 35 | 000014 | Washer | 1 |
| 36 | 110002 | Screw(M3-0.5 × 5) | 1 |
| 37 | 6200120 | Upper Looper Bar, C. Set | 1 |
| 38 | 6200453 | Upper Looper Bar Guide Bushing Postioner | 1 |
| 39 | 009746 | Screw(M4-0.7 × 8) | 1 |
| 40 | 110001 | Screw(M4-0.7 × 5.4) | 1 |
Page 27 — LOWER LOOPER DRIVING MECHANISM
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200108 | Looper Driving Lever Connecting Rod | 1 |
| 2 | 120049 | Screw(M4-0.7 × 16) | 4 |
| 3 | 6200080 | Connecting Rod Swing-proof | 1 |
| 4 | 6200377 | Lower Looper Driving Lever | 1 |
| 5 | 120006 | Screw(M6-1 × 12) | 1 |
| 6 | 6200189 | Driving Shaft Thrust Ring | 1 |
| 7 | 6200092 | Collar(10 × 19 × 9mm) | 1 |
| 8 | 160003 | Screw(M5-0.8 × 5) | 3 |
| 9 | 6200109 | Looper Driving Shaft | 1 |
| 10 | 6200107 | Lower Looper Holder Arm | 1 |
| 11 | 300008 | Washer | 1 |
| 12 | 140002 | Screw(M6-1 × 14) | 1 |
| 13 | 6200279 | Thread Pull-off | 1 |
| 14 | 110009 | Screw(M4-0.7 × 8) | 1 |
| 15 | 6209301 | Lower Looper | 1 |
| 16 | 6209201 | Needle Guard(Rear) | 1 |
| 17 | 110036 | Screw(M3-0.5 × 6.5) | 1 |
| 18 | 180014 | Screwed Pin(M3-0.5 × 4.5) | 1 |
| 19 | 300106 | Conical Spring Washer | 1 |
Page 29 — FEED DRIVING CONTROL MECHANISM / 前送リ調節機構
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200254 | Main Feed Bar Lever | 1 |
| 2 | 120006 | Screw(M6-1 × 12) | 4 |
| 3 | 6200119 | Main Feed Bar Lever Pin | 1 |
| 4 | 300000 | Washer | 3 |
| 5 | 100002 | Nut | 1 |
| 6 | 000669 | Washer | 2 |
| 7 | 6200263 | Thrust Plate | 1 |
| 8 | 6200038 | Retaining Ring | 1 |
| 9 | 6100262 | Main Feed Bar Connection | 1 |
| 10 | 6200118 | Connection Bushing | 1 |
| 11 | 140001 | Screw(M5-0.5 × 12) | 1 |
| 12 | 6200127 | Feed Bar, Complete Set | 1 |
| 13 | 6200184 | Main Feed Bar | 1 |
| 14 | 6200183 | Differential Feed Bar | 1 |
| 15 | 6200190 | Differential Feed Bar Connection | 1 |
| 16 | 6200265 | Connection Bushing | 1 |
| 17 | 140000 | Screw(M5-0.5 × 15.5) | 1 |
| 18 | 6200255 | Feed Bar Driving Shaft | 1 |
| 19 | 6200256 | Feed Bar Driving Shaft Lever | 1 |
| 20 | 6200142 | Connecting Rod Pin | 1 |
| 21 | 160007 | Screw(M6-1 × 6) | 1 |
| 22 | 6200165 | Differential Rocker, Complete Set | 1 |
| 23 | 6200166 | Differential Rocker | 1 |
| 24 | 6200167 | Differential Regulating Slider | 1 |
| 25 | 6200168 | Differential Regulating Slider Cap | 1 |
| 26 | 110033 | Screw(M3-0.5 × 6) | 2 |
| 27 | 6200130 | Differential Lever(Right), C. Set | 1 |
| 28 | 6100255 | Slider Link | 1 |
| 29 | 6100343 | Retaining Ring | 1 |
| 30 | 6100360 | Slider Link Pin | 1 |
| 31 | 6200125 | Differential Lever(Right) | 1 |
| 32 | 6100235 | Collar(10 × 17 × 8mm) | 1 |
| 33 | 160001 | Screw(M4-0.7 × 4) | 2 |
| 34 | 000690 | Spring Pin | 1 |
| 35 | 6200123 | Differential Lever Spring | 1 |
| 36 | 6100363 | O-ring(P7) | 1 |
| 37 | 6200126 | Differential Lever(Left) | 1 |
| 38 | 000528 | Washer | 1 |
| 39 | 000561 | Conical Spring Washer | 1 |
| 40 | 100000 | Adjusting Nut | 1 |
| 41 | 190001 | Adjusting Screw(M6-1×11.5,M4.5-0.5×4) | 1 |
| 42 | 6200131 | Differential Feed Graduation | 1 |
| 43 | 110016 | Screw(M4-0.7 × 15) | 2 |
| 44 | 6100269 | Differential Lever Stop | 2 |
| 45 | 110017 | Screw(M5-0.8 × 8) | 2 |
Page 31 — FEED DRIVING MECHANISM / 送り機構
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200173 | Feed Bar Guide Support | 1 |
| 2 | 110064 | Screw(M4-0.7 × 8) | 4 |
| 3 | 110004 | Screw(M3.5-0.6 × 8) | 6 |
| 4 | 6200174 | Feed Bar Shield(Front) | 1 |
| 5 | 6200175 | Feed Bar Shield(Rear) | 1 |
| 6 | 6200177 | Feed Bar Shield Guide | 1 |
| 7 | 6200178 | Feed Bar Guide | 2 |
| 8 | 6200176 | Feed Bar Shield(Upper) | 1 |
| 9 | 6200253 | Feed Bar Guide Bushing | 1 |
| 10 | 160007 | Screw(M6-1 × 6) | 1 |
| 11 | 6200161 | Feed Bar Block(Rear) Shaft | 1 |
| 12 | 160001 | Screw(M4-0.7 × 4) | 1 |
| 13 | 6200140 | Feed Bar Block(Rear) | 1 |
| 14 | 6200139 | Feed Bar Block(Rear) Lid | 1 |
| 15 | 130002 | Screw(M3-0.5 × 6) | 1 |
| 16 | 6200138 | Feed Bar Block(Front) | 1 |
| 17 | 6200141 | Eccentric Pin Holder | 1 |
| 18 | 6100366 | Feed Dog Eccentric Pin | 1 |
| 19 | 6100281 | Feed Dog Eccentric | 1 |
| 20 | 6100282 | Roller Bearing | 1 |
| 21 | 6200133 | Feed Dog Driving Connecting Rod | 1 |
| 22 | 6100284 | Feed Dog Regulating Eccentric | 1 |
| 23 | 180002 | Screw(M3-0.5 × 4) | 2 |
| 24 | 110070 | Screw(M3-0.5 × 6.3) | 1 |
| 25 | 6100285 | Feed Dog Regulating Plate Spring | 1 |
| 26 | 6100286 | Feed Dog Regulating Plate | 1 |
| 27 | 6200137 | Feed Dog Regulating Gear | 1 |
| 28 | 180003 | Screw(M5-0.8 × 8) | 1 |
| 29 | 160003 | Screw(M5-0.8 × 5) | 3 |
| 30-1 | 6209000 | Differential Feed Dog(X4, X5) | 1 |
| 30-2 | 6209006 | Differential Feed Dog(Y5, Y6) | 1 |
| 31 | 6209001 | Main Feed Dog | 1 |
| 32 | 6209002 | Auxiliary Feed Dog | 1 |
| 33 | 110026 | Screw(M3-0.5 × 6) | 1 |
| 34 | 6200257 | Connecting Rod Cover | 1 |
| 35 | 130003 | Screw(M4-0.7 × 7.3) | 2 |
Page 33 — LUBRICATING MECHANISM
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200506 | Oil Pump, Complete Set | 1 |
| 2 | 6200475 | Worm Wheel | 1 |
| 3 | 160001 | Screw(M4-0.7 × 4) | 4 |
| 4 | 120049 | Screw(M4-0.7 × 16) | 2 |
| 5 | 320009 | Oil Tube Fitting Stud(Long)(M6-1) | 1 |
| 6 | 000567 | Seal | 1 |
| 7 | 6200507 | Oil Tube, Complete Set | 1 |
| 8 | 6100310 | Oil Tube Fitting One Way End | 4 |
| 9 | 6100303 | Oil Tube Clamp | 7 |
| 10 | 6200508 | Oil Tube(4.6 × 6.4 × 220mm) | 1 |
| 11 | 320008 | Oil Tube Fitting Stud(M6-1) | 2 |
| 12 | 6200509 | Suction Tube, C. Set | 1 |
| 13 | 6100308 | Oil Tube Fitting Two Way | 1 |
| 14 | 6200510 | Oil Tube(4.6 × 6.4 × 242.5mm) | 1 |
| 15 | 6200206 | Oil Filter | 1 |
| 16 | 6200518 | Suction Pipe(Upper), C. Set | 1 |
| 17 | 6200519 | Suction Tube(4 × 6 × 18mm) | 1 |
| 18 | 6200195 | Suction Tube(2.5 × 4 × 60mm) | 1 |
| 19 | 6200196 | Suction Pipe(Upper) | 1 |
| 20 | 310073 | Felt | 1 |
| 21 | 6200299 | Oil Tube, Complete Set | 1 |
| 22 | 6200301 | Oil Tube(4.6 × 6.4 × 320mm) | 1 |
| 23 | 6200450 | Oil Pressure Regulating Valve | 1 |
| 24 | 6200451 | Oil Pressure Regulating Valve, C. Set | 1 |
| 25 | 6200450 | Oil Pressure Regulating Valve | 1 |
| 26 | 6200037 | Oil Pressure Regulating Ball | 1 |
| 27 | 6200028 | Guide Pin | 1 |
| 28 | 6200476 | Spring | 1 |
| 29 | 006861 | Adjusting Screw(1/4-40 × 5) | 1 |
| 30 | 000419 | Nut | 1 |
| 31 | 6100002 | Oil Filter Cap | 1 |
| 32 | 110045 | Screw(M4-0.7 × 12) | 3 |
| 33 | 6100370 | O-ring(P42) | 1 |
| 34 | 6100296 | Oil Filter | 1 |
| 35 | 6100297 | Filter Housing | 1 |
| 37 | 6200248 | Oil Pipe | 1 |
| 39 | 6200186 | Oil Pipe, C. Set | 1 |
| 40 | 6200185 | Oil Pipe | 1 |
| 41 | 000456 | Seal Plug | 1 |
| 42 | 310090 | Oil Wick | 1 |
| 43 | 6200074 | Oil Sight Gauge | 1 |
| 44 | 6100363 | O-ring(P7) | 1 |
| 45 | 110053 | Screw(M6-1 × 8) | 1 |
| 46 | 320012 | Oil Tube Fitting Stud(1/4-40) | 3 |
Page 35 — CZ6000 EXCLUSIVE PARTS / サブモデル専用部品
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6207025 | Presser Foot, Complete Set(O4) | 1 |
| 2 | 6207001 | Presser Foot Hinge | 1 |
| 3 | 110004 | Screw(M3.5-0.6 × 8) | 1 |
| 4 | 6207003 | Presser Foot Half-stay | 1 |
| 5 | 110050 | Screw(M3.5-0.6 × 4.5) | 1 |
| 6 | 6207026 | Presser Foot(Lower) | 1 |
| 7 | 6207027 | Presser Foot Stitch Tongue(O4) | 1 |
| 8 | 6207000 | Finger Guard | 1 |
| 9 | 005036 | Screw(1/8-44 × 5.6) | 3 |
| 10 | 6201000 | Cloth Plate | 1 |
| 11 | 6201001 | Cloth Plate(Lower) | 1 |
| 12 | 6201002 | Rubber Cushion | 1 |
| 13 | 6201017 | Pin | 1 |
| 14 | 6208004 | Stitch Plate(O4) | 1 |
| 15 | 6209009 | Differential Feed Dog | 1 |
| 16 | 6209010 | Main Feed Dog | 1 |
| 17 | 6209302 | Upper Looper | 1 |
| 18 | 6201003 | Blind Hemming Guide, C. Set | 1 |
| 19 | 6201004 | Overhanging Guide Hinge, C. Set | 1 |
| 20 | 6201005 | Hemming Positioner | 1 |
| 21 | 000533 | Washer | 1 |
| 22 | 007006 | Screw(9/64-40 × 4) | 1 |
| 23 | 6201006 | Blind-Hemming Edge Guide, C. Set | 1 |
| 24 | 6201007 | Blind-Hemming Edge Guide | 1 |
| 25 | 009624 | Screw(1/8-44 × 5.3) | 1 |
| 26 | 6201008 | Swing-out Lever | 1 |
| 27 | 004150 | Screw(11/64-40 × 5.2) | 1 |
| 28 | 000172 | Conical Spring Washer | 1 |
| 29 | 000334 | Nut | 1 |
| 30 | 6201009 | Overhanging Guide Hinge Stop | 1 |
| 31 | 001331 | Screw(9/64-40 × 3.8) | 1 |
| 32 | 6201010 | Swing-out Lever Holder | 1 |
| 33 | 6201011 | Swing-out Lever Stop | 1 |
| 34 | 6201012 | Edge Guide Positioning Pin | 2 |
| 35 | 6201013 | Positioning Pin Holder Spring | 2 |
| 36 | 001225 | Screw(1/8-44 × 2.8) | 1 |
| 37 | 001196 | Screw(1/8-44 × 6) | 3 |
| 38 | 6201014 | Edge Guide Adjusting Holder | 1 |
| 39 | 004106 | Screw(9/64-40 × 6.5) | 2 |
| 40 | 007619 | Screw(9/64-40 × 6.3) | 1 |
| 41 | 6201015 | Adjusting Screw Guide Piece | 1 |
| 42 | 006444 | Adjusting Screw(1/8-44 × 12.9) | 1 |
| 43 | 6201016 | Edge Guide Adjusting Holder Cover | 1 |
| 44 | 110047 | Screw(M4-0.7 × 10) | 2 |
Page 37 — CZ6003 EXCLUSIVE PARTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6207043 | Presser Foot, C. Set(O4) | 1 |
| 2 | 6207001 | Presser Foot Hinge | 1 |
| 3 | 110004 | Screw(M3.5-0.6 × 8) | 1 |
| 4 | 6207002 | Presser Foot(Lower) | 1 |
| 5 | 6207045 | Presser Foot Stitch Tongue(O4) | 1 |
| 6 | 6207000 | Finger Guard | 1 |
| 7 | 000444 | Washer | 1 |
| 8 | 005036 | Screw(1/8-44 × 5.6) | 1 |
| 9 | 6200034 | Thread Chain Guide | 1 |
| 10 | 004237 | Screw(3/32-56 × 2.6) | 1 |
| 11 | 6207003 | Presser Foot Half-stay | 1 |
| 12 | 110050 | Screw(M3.5-0.6 × 4.5) | 1 |
| 13-1 | 6208044 | Stitch Plate(O3) | 1 |
| 13-2 | 6208011 | Stitch Plate(O4) | 1 |
| 14 | 6209302 | Upper Looper | 1 |
| 15 | 6201017 | Pin | 1 |
| 16 | 6209000 | Differential Feed Dog(O4) | 1 |
Page 39 — CZ6016 EXCLUSIVE PARTS / サブモデル専用部品
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6207073 | Presser Foot, C. Set(O2) | 1 |
| 2 | 6207001 | Presser Foot Hinge | 1 |
| 3 | 110004 | Screw(M3.5-0.6 × 8) | 1 |
| 4 | 6207003 | Presser Foot Half-stay | 1 |
| 5 | 110050 | Screw(M3.5-0.6 × 4.5) | 1 |
| 6 | 6207089 | Presser Foot (Lower) | 1 |
| 7 | 6200034 | Thread Chain Guide | 1 |
| 8 | 004237 | Screw(3/32-56 × 2.6) | 1 |
| 9 | 6207072 | Presser Foot Stitch Tongue | 1 |
| 10 | 6207112 | Finger Guard | 1 |
| 11 | 005036 | Screw(1/8-44 × 5.6) | 1 |
| 12 | 6208035 | Stitch Plate, C. Set(O2) | 1 |
| 13 | 6208034 | Stitch Plate(O2) | 1 |
| 14 | 6208023 | Stitch Plate Tongue | 1 |
| 15 | 004182 | Screw(3/32-56 × 2.5) | 1 |
| 16 | 6209302 | Upper Looper | 1 |
| 17 | 6201017 | Pin | 1 |
| 18 | 180002 | Screw(M3-0.5 × 4) | 2 |
| 19 | 6209031 | Differential Feed Dog | 1 |
| 20 | 6209032 | Main Feed Dog | 1 |
| 21 | 6209013 | Auxiliary Feed Dog | 1 |
| 22 | 6207029 | Presser Foot, C. Set(O2) | 1 |
| 23 | 6207055 | Presser Foot Hinge | 1 |
| 24 | 6207030 | Presser Foot(Lower) | 1 |
| 25 | 6207031 | Presser Foot Hinge Spring | 1 |
| 26 | 004131 | Screw(1/8-44 × 6) | 1 |
| 27 | 6207032 | Thread Chain Guide | 1 |
| 28 | 6207033 | Presser Foot Stitch Tongue | 1 |
| 29 | 004138 | Screw(1/8-44 × 5) | 1 |
| 30 | 6208005 | Stitch Plate, Complete Set | 1 |
| 31 | 6208006 | Stitch Plate | 1 |
| 32 | 6208007 | Stitch Plate Tongue | 1 |
| 33 | 004204 | Screw(3/32-100 × 2.2) | 1 |
| 34 | 6208008 | Stitch Plate Tongue Stop | 1 |
| 35 | 001228 | Screw(3/32-56 × 3.2) | 1 |
| 36 | 000933 | Rubber Cushion(Medium) | 1 |
| 37 | 300040 | Washer | 1 |
| 38 | 6209012 | Main Feed Dog(with Rubber Face) | 1 |
| 39 | 6209011 | DifferentialFeedDog(withRubberFace) | 1 |
| 40 | 000932 | Rubber Cushion(Large) | 1 |
| 41 | 6201020 | Lower Knife Holder | 1 |
| 42 | 6201019 | Upper Knife Holder | 1 |
| 43 | 6201018 | Upper Knife | 1 |
Page 41 — CZ6016-61 EXCLUSIVE PARTS
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6207073 | Presser Foot, Complete Set(02, 03) | 1 |
| 2 | 6207001 | Presser Foot Hinge | 1 |
| 3 | 110004 | Screw(M3.5-0.6 × 8) | 1 |
| 4 | 6207003 | Presser Foot Half-stay | 1 |
| 5 | 110050 | Screw(M3.5-0.6 × 4.5) | 1 |
| 6 | 6207089 | Presser Foot(Lower) | 1 |
| 7 | 6200034 | Thread Chain Guide | 1 |
| 8 | 004237 | Screw(3/32-56 × 2.6) | 1 |
| 9 | 6207072 | Presser Foot Stitch Tongue | 1 |
| 10 | 6207112 | Finger Guard | 1 |
| 11 | 005036 | Screw(1/8-44 × 5.6) | 1 |
| 12-1 | 6208023 | Stitch Plate, Complete Set(O2) | 1 |
| 12-2 | 6208018 | Stitch Plate, Complete Set(O3) | 1 |
| 13 | 6208019 | Stitch Plate | 1 |
| 14-1 | 6208022 | Stitch Plate Tongue(O2) | 1 |
| 14-2 | 6208020 | Stitch Plate Tongue(O3) | 1 |
| 15 | 004182 | Screw(3/32-56 × 2.5) | 1 |
| 16 | 6209023 | Differential Feed Dog | 1 |
| 17 | 6201017 | Pin | 1 |
| 18 | 180002 | Screw(M3-0.5 × 4) | 2 |
Page 43 — CZ6120, 6120-40, 6125 EXCLUSIVE PARTS(1) サブモデル専用部品(1) 18
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200058 | Needle Bar Driving Lever | 1 |
| 2 | 6200134 | Crankshaft | 1 |
| 3 | 6200135 | Needle Thread Pull-off | 1 |
| 5 | 6200136 | Upper Knife Holder(Flat Type) | 1 |
| 6 | 6200308 | Upper Knife(Flat Type) | 1 |
| 7 | 6100058 | Tension Spring(Needle) | 1 |
| 8 | 6200128 | Eye Guard Spacer | 1 |
| 9 | 100001 | Nut | 1 |
| 10 | 6209304 | Upper Looper | 1 |
| 11 | 6200455 | Upper Looper Driving Lever | 1 |
| 12 | 6200488 | Driving Shaft Thrust Ring | 1 |
| 13 | 6200108 | Looper Driving Lever Connecting Rod | 1 |
| 14 | 6200457 | Lower Looper Driving Lever | 1 |
| 15 | 6200517 | Driving Shaft Thrust Ring | 1 |
| 17 | 6200459 | Looper Thread Pull-off | 1 |
| 18 | 6200460 | Looper Holder Cover | 1 |
| 19 | 110001 | Screw(M4-0.7 x 5.4) | 1 |
| 20 | 6200461 | Upper Looper Thread Eyelet | 1 |
| 21 | 6200462 | Lower Looper Thread Eyelet | 1 |
| 22 | 000014 | Washer | 2 |
| 23 | 110002 | Screw(M3-0.5 x 5) | 1 |
| 24 | 110026 | Screw(M3-0.5 x 6) | 1 |
| 25 | 6200463 | Lower Looper Thread Pull-off | 1 |
| 26 | 6200464 | Looper Thread Eyelet(Left) | 1 |
| 27 | 130020 | Screw(M4-0.7 x 6.3) | 1 |
| 28 | 390663 | Thread Chart | 1 |
| 29-1 | 6208000 | Stitch Plate(Y5) | 1 |
| 29-2 | 6208002 | Stitch Plate(Y6) | 1 |
| 29-3 | 6208014 | Stitch Plate(Y7) | 1 |
| 29-4 | 6208016 | Stitch Plate(Y8) | 1 |
| 30 | 6208026 | Adjustable Stitch Tongue | 1 |
| 31 | 110064 | Screw(M4-0.7 x 8) | 2 |
Page 45 — CZ6120, 6120-40, 6125 EXCLUSIVE PARTS(2) サブモデル専用部品(2)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1-1 | 6207044 | Presser Foot, C. Set(Y5, Y6) | 1 |
| 1-2 | 6207063 | Presser Foot, C. Set(Y7) | 1 |
| 1-3 | 6207067 | Presser Foot, C. Set(Y8) | 1 |
| 2 | 6207001 | Presser Foot Hinge | 1 |
| 3 | 110004 | Screw(M3.5-0.6 × 8) | 1 |
| 4 | 6207003 | Presser Foot Half-stay | 1 |
| 5 | 110050 | Screw(M3.5-0.6 × 4.5) | 1 |
| 6 | 6207002 | Presser Foot (Lower) | 1 |
| 7 | 6200034 | Thread Chain Guide | 1 |
| 8 | 004237 | Screw(3/32-56 × 2.6) | 1 |
| 9-1 | 6207046 | Presser Foot Stitch Tongue(Y5, Y6) | 1 |
| 9-2 | 6207058 | Presser Foot Stitch Tongue(Y7) | 1 |
| 9-3 | 6207070 | Presser Foot Stitch Tongue(Y8) | 1 |
| 10 | 6207018 | Finger Guard | 1 |
| 11 | 000444 | Washer | 1 |
| 12 | 005036 | Screw(1/8-44 × 5.6) | 1 |
| 13-1 | 6207021 | Presser Foot, C. Set(Y5, Y6) | 1 |
| 13-2 | 6207059 | Presser Foot, C. Set(Y7) | 1 |
| 14 | 6207019 | Presser Foot (Lower) | 1 |
| 15-1 | 6207022 | Presser Foot Stitch Tongue(Y5, Y6) | 1 |
| 15-2 | 6207056 | Presser Foot Stitch Tongue(Y7) | 1 |
| 16 | 6207018 | Presser Foot Tape Guide | 1 |
| 17 | 001230 | Screw(3/32-56 × 3.8) | 1 |
| 18 | 6207113 | Presser Foot, C. Set(Y5) | 1 |
| 19 | 6207114 | Presser Foot Hinge | 1 |
| 20 | 6207115 | Presser Foot (Lower) | 1 |
| 21 | 6207116 | Presser Foot Stitch Tongue(Y5) | 1 |
| 22 | 6207117 | Finger Guard | 1 |
| 23 | 110121 | Screw(1/8-44 × 5.6) | 1 |
| 24 | 6207118 | Presser Foot Chip | 1 |
| 25 | 004236 | Screw(3/32-56 × 4.2) | 1 |
| 26 | 6200567 | Edge Guide Unit | 1 |
| 27 | 110009 | Screw(M4-0.7 × 8) | 1 |
Page 47 — K2 DEVICE(1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6201021 | K2 Device, Complete Set | 1 |
| 2 | 6201022 | Suction Pipe, Complete Set | 1 |
| 3 | 6201023 | Suction Pipe | 1 |
| 4 | 310017 | Oil Wick | 1 |
| 5 | 000755 | Oil Wick Pin | 1 |
| 6 | 6201024 | Suction Pipe Cover | 1 |
| 7 | 004237 | Screw(3/32-56 × 2.6) | 1 |
| 8 | 004404 | Screw(3/32-56 × 5.1) | 2 |
| 9 | 6201025 | Upper Trimming Knife | 1 |
| 10 | 004131 | Screw(1/8-44 × 6) | 1 |
| 11 | 004139 | Screw(3/32-56 × 3) | 2 |
| 12 | 6201026 | Lower Trimming Knife Holder Pin | 1 |
| 13 | 6201027 | Lower Trimming Knife | 1 |
| 14 | 004236 | Screw(3/32-56 × 4.2) | 1 |
| 15 | 6201040 | Lower Trimming Knife Driving Plate | 1 |
| 16 | 6201041 | Spring Sleeve | 1 |
| 17 | 6201042 | Lower Trimming Knife Pushing Spring | 1 |
| 18 | 6201043 | Spring Protect Washer | 1 |
| 19 | 6201044 | Washer | 1 |
| 20 | 6201045 | Air Shield Rubber | 1 |
| 21 | 001202 | Screw(9/64-44 × 6.6)[9/64-40 × 5.3] | 2 |
| 22 | 6201046 | Lower Trimming Knife Guide Support | 1 |
| 23 | 110006 | Screw(M3.5-0.6 × 10) | 1 |
| 24 | 6201047 | Lower Trimming Knife Guide | 1 |
| 25 | 270001 | Screw(1/8-44 × 3) | 1 |
| 26 | 6201048 | Suction Power Control, C. Set | 1 |
| 27 | 6201039 | Suction Power Control Tube(Inner) | 1 |
| 28 | 6201049 | Suction Power Control Tube | 1 |
| 29 | 001892 | Screw(1/8-44 × 2.9) | 1 |
| 30 | 6201050 | Nylon Hose | 1 |
| 31 | 6201051 | Cloth Plate Spacer | 1 |
| 32 | 110042 | Screw(M3.5-0.6 × 4) | 2 |
| 33 | 6201052 | Suction Pipe Support | 1 |
Page 49 — K2 DEVICE(2) / K2装置(2)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1-1 | 6207178 | Presser Foot, C. Set(O3) | 1 |
| 1-2 | 6207054 | Presser Foot, C. Set(O4) | 1 |
| 2 | 6207001 | Presser Foot Hinge | 1 |
| 3 | 110004 | Screw(M3.5-0.6 × 8) | 1 |
| 4 | 6207002 | Presser Foot(Lower) | 1 |
| 5-1 | 6207179 | Presser Foot Stitch Tongue(O3) | 1 |
| 5-2 | 6207045 | Presser Foot Stitch Tongue(O4) | 1 |
| 6 | 6207000 | Finger Guard | 1 |
| 7 | 000444 | Washer | 1 |
| 8 | 005036 | Screw(1/8-44 × 5.6) | 1 |
| 9 | 6207047 | Thread Chain Guide | 1 |
| 10 | 004237 | Screw(3/32-56 × 2.6) | 1 |
| 11 | 6207003 | Presser Foot Half-stay | 1 |
| 12 | 110050 | Screw(M3.5-0.6 × 4.5) | 1 |
| 13-1 | 6207049 | Presser Foot, C. Set(Y5, Y6) | 1 |
| 13-2 | 6207262 | Presser Foot, C. Set(X4) | 1 |
| 14-1 | 6207046 | Presser Foot Stitch Tongue(Y5, Y6) | 1 |
| 14-2 | 6207057 | Presser Foot Stitch Tongue(X4) | 1 |
| 15 | 6207050 | Presser Foot, C. Set(X4) | 1 |
| 16 | 6207019 | Presser Foot(Lower) | 1 |
| 18 | 6207051 | Presser Foot Stitch Tongue(X4) | 1 |
| 19 | 6207018 | Presser Foot Tape Guide | 1 |
| 20 | 001230 | Screw(3/32-56 × 3.8) | 1 |
| 21 | 6207098 | Presser Foot, C. Set(Y5, Y6) | 1 |
| 22 | 6207022 | Presser Foot Stitch Tongue(Y5, Y6) | 1 |
Page 51 — B3 DEVICE
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6201054 | B3 Device, C. Set | 1 |
| 2 | 6201037 | Back Tack Cutting Unit | 1 |
| 3 | 6201028 | Thread Chain Cutting Knife Holder | 1 |
| 4 | 6201053 | Thread Chain Cutting Knife | 1 |
| 5 | 6201029 | Thread Chain Cutting Knife Holder Spacer | 1 |
| 6 | 003637 | Screw(1/8-44 × 2.5) | 2 |
| 7 | 004205 | Screw(11/64-40 × 18) | 1 |
| 8 | 6201036 | Thread Chain Holder | 1 |
| 9-1 | 6201035 | Thread Chain Holder Spring(Standard) | 1 |
| 9-2 | 6201034 | Thread Chain Holder Spring(with Stronger Pressure) | 1 |
| 10 | 000361 | Adjusting Nut | 2 |
| 11 | 000535 | Washer | 1 |
| 12 | 110044 | Screw(M3-0.6 × 14) | 1 |
| 13 | 6201033 | Cloth Plate | 1 |
| 14 | 6201030 | Synchronizer Positioning Pin | 1 |
| 15 | 110009 | Screw(M4-0.7 × 8) | 1 |
| 16 | 6200552 | Synchronizer Cushion | 1 |
| 17-1 | 6207180 | Presser Foot, C. Set(O3) | 1 |
| 17-2 | 6207052 | Presser Foot, C. Set(O4) | 1 |
| 18 | 6207001 | Presser Foot Hinge | 1 |
| 19 | 110004 | Screw(M4-0.7 × 8) | 1 |
| 20 | 6207002 | Presser Foot(Lower) | 1 |
| 21-1 | 6207181 | Presser Foot Stitch Tongue(O3) | 1 |
| 21-2 | 6207053 | Presser Foot Stitch Tongue(O4) | 1 |
| 22 | 6207000 | Finger Guard | 1 |
| 23 | 000444 | Washer | 1 |
| 24 | 005036 | Screw(1/8-44 × 5.6) | 1 |
| 25 | 6200034 | Thread Chain Guide | 1 |
| 26 | 004237 | Screw(3/32-56 × 1.7) | 1 |
| 27 | 6207003 | Presser Foot Half-stay | 1 |
| 28 | 110050 | Screw(M3.5-0.6 × 4.5) | 1 |
| 29-1 | 6208045 | Stitch Plate(O3) | 1 |
| 29-2 | 6208013 | Stitch Plate(O4) | 1 |
| 30 | 6209015 | Differential Feed Dog | 1 |
| 31 | 6209016 | Main Feed Dog | 1 |
Page 53 — MT22 DEVICE(1) / MT22装置(1)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6201175 | Solenoid Cover | 1 |
| 2 | 006233 | Screw(M3-0.5 × 5) | 2 |
| 3 | 6201169 | Solenoid | 1 |
| 4 | 000206 | Nut | 2 |
| 5 | 6201171 | Solenoid Holder | 1 |
| 6 | 009976 | Screw(M6-1 × 15) | 2 |
| 7 | 340003 | Pin | 1 |
| 8 | 6201174 | Drive Gear | 1 |
| 9 | 009749 | Screw(M4-0.7 × 16) | 1 |
| 10 | 000339 | Nut | 1 |
| 11 | 006638 | Screw(5/32-40 × 9.5) | 1 |
| 12 | 6201172 | Solenoid Spring | 1 |
| 13 | 6201179 | Trimming Device C. Set | 1 |
| 14 | 6201173 | Driven Gear | 1 |
| 15 | 160001 | Screw(M4-0.7 × 10) | 2 |
| 16 | 6201178 | Upper Knife Holder | 1 |
| 17 | 110039 | Screw(M3.5-0.6 × 10) | 1 |
| 18 | 300050 | Spring Washer | 1 |
| 19 | 000532 | Washer | 1 |
| 20 | 6200516 | Upper Knife Rubber Cushion | 1 |
| 21 | 6201166 | Lower Knife | 1 |
| 22 | 6201167 | Lower Knife Fabric Guide | 1 |
| 23 | 001230 | Screw(3/32-56 × 3.8) | 2 |
| 24 | 6201177 | Fabric Guide(Finger guard) | 1 |
| 25 | 004404 | Screw(3/32-56 × 5.1) | 1 |
| 26 | 6201170 | Upper Knife | 1 |
| 27 | 6201164 | Collar(6 × 9 × 5mm) | 1 |
| 28 | 003637 | Screw(1/8-44 × 2.5) | 1 |
| 29 | 6201165 | Upper Knife Spring | 1 |
| 30 | 6201176 | Upper Knife Holder Fixing Block | 1 |
| 31 | 004358 | Screw(9/64-40 × 5.6) | 2 |
| 32 | 6201063 | Trimming Device Support | 1 |
| 33 | 009748 | Screw(M4-0.7 × 12) | 1 |
| 34 | 000644 | Spring Washer | 1 |
| 35 | 000665 | Washer | 1 |
| 36 | 009976 | Screw(M6-1 × 15) | 1 |
| 37 | 000661 | Spring Washer | 1 |
| 38 | 000425 | Washer | 1 |
| 39 | 6201185 | Cloth Plate Spacer | 1 |
| 40 | 110042 | Screw(M3.5-0.6 × 4) | 2 |
Page 55 — MT22 DEVICE(2)
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6201183 | Manual Switch, C. Set | 1 |
| 2 | 6201187 | Switch Support | 1 |
| 3 | 180025 | Screw(M4-0.7 × 4.5) | 1 |
| 4 | 110106 | Screw(M4-0.7 × 8) | 2 |
| 5 | 6201182 | Switch | 1 |
| 6 | 6201186 | Switch Cover | 1 |
| 7 | 009993 | Screw(M3-0.6 × 16) | 1 |
| 8 | 6201157 | Cord Bushing | 1 |
| 9 | 009995 | Screw(M3-0.6 × 5) | 1 |
| 10 | 6201180 | Manual Switch Plate | 1 |
| 11 | 000002 | Spring Washer | 1 |
| 12 | 000488 | Nut | 1 |
| 13 | 6201181 | Cord Clamp(3.4-2N) | 2 |
| 14 | 110012 | Screw(M4-0.7 × 5) | 2 |
| 15 | 6201184 | Control Box, C. Set | 1 |
| 16 | 6101118 | Control Stay | 2 |
| 17 | 006905 | Wood Screw(Φ 5.1 × 5) | 6 |
Page 57 — MISCELLANEOUS SUPPORTING BOARD
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6200303 | Belt Cover | 1 |
| 2 | 110015 | Screw(M4-0.7 × 25) | 2 |
| 3 | 6200304 | Supplementary Belt Cover | 1 |
| 4 | 110013 | Screw(M4-0.7 × 8) | 2 |
| 5 | 6200148 | Supporting Board | 1 |
| 6 | 000070 | Hanging Nut | 4 |
| 7 | 009861 | Hanging Bolt | 4 |
| 8 | 6200210 | Spacer(15mm) | 4 |
| 9 | 6101005 | Spacer(5mm)(See the below) | 4 |
| 10 | 6100326 | Supporting Board Rubber Cushion | 8 |
| 11 | 000162 | Washer | 4 |
| 12 | 000016 | Nut | 8 |
| 13 | 6200152 | Chute(Upper) Support | 1 |
| 14 | 005624 | Screw(M4-0.7 × 10) | 4 |
| 15 | 6200146 | Chute(Upper) | 1 |
| 16 | 6200147 | Chute(Lower) | 1 |
| 17 | 6200151 | Chip Receiver | 1 |
| 18 | 350007 | Wood Screw(φ 3.5 × 16) | 2 |
| 19 | 6200524 | Edge Guide Holder | 1 |
| 20 | 110035 | Screw(M4-0.7 × 10) | 2 |
| 21 | 110009 | Screw(M4-0.7 × 8) | 1 |
| 22 | 000665 | Washer | 1 |
Page 59 — THREAD STAND
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 1 | 6802629 | Thread Stand, C. Set(4 Spools Type) | 1 |
| 2 | 6802601 | Column Cap | 1 |
| 3 | 6802602 | Column Pipe(Upper) | 1 |
| 4 | 6802603 | Thread Guide Holder(Large) | 1 |
| 5 | 911002 | Screw(M4-0.7 × 20) | 1 |
| 6 | 911001 | Screw(M4-0.7 × 12) | 3 |
| 7 | 910001 | Nut | 4 |
| 8 | 6802604 | Column Pipe Connector | 1 |
| 9 | 911006 | Screw(M5-0.8 × 13) | 2 |
| 10 | 910000 | Nut | 6 |
| 11 | 6802605 | Column Pipe(Lower) | 1 |
| 12 | 930052 | Washer | 1 |
| 13 | 930053 | Spring Washer | 1 |
| 14 | 910003 | Nut(M16-1.5) | 1 |
| 15 | 6802606 | Thread Hanger(2 Spools Type) | 4 |
| 17 | 6802608 | Thread Eyelet | 4 |
| 18 | 6802609 | Thread Hanger Holder | 4 |
| 19 | 911060 | Screw(M6-1 × 15) | 4 |
| 20 | 6802610 | Thread Guide Arm | 1 |
| 21 | 6802611 | Thread Guide Holder(Small) | 1 |
| 22 | 6802612 | Thread Guide(5 Spools Type) | 1 |
| 23 | 6802613 | Spool Cushion | 4 |
| 24 | 6802614 | Spool Pin | 4 |
| 25 | 6802615 | Spool Mat | 4 |
| 26 | 6802616 | Spool Seat Disc | 4 |
| 27 | 930055 | Spring Washer | 4 |
Page 60 — WARNING LABEL 警告ラベル
| Ref | Part number | Part name | Qty |
|---|---|---|---|
| 390220 | SAFETY INSTRUCTON LABEL | ||
| 390144 | DANGER : WARNING OF ELECTRIC SHOCK BY HIGH-VOLTAGE | ||
| 390145 | "Be sure to connect earth line". | ||
| 390146 | ROTATING-DIRECTION SYMBOL : CHECK CORRECT ROTATING DIRECTION | ||
| 390147 | EYE GUARD : TAKE CARE NOT CAUSE INJURY TO EYES BELT COVER : DO NOT INSERT FINGERS | ||
| 390148 | CAUTION FOR HIGH TEMPERATURE : DO NOT TOUCH STEPPING MOTOR AND SOLENOID |
Yamato CZ6000 — parts catalog
- Page 1 (cover): This is the cover page for the Yamato High Speed Overlock Stitch Machine CZ6000 parts list. It features the Yamato logo, the title 'Parts List', the machine model 'CZ6000', an illustration of the machine, and a list of applicable models.
- Page 2 (text): This page provides instructions on how to read the parts list, including explanations of symbols and how to place an order. It also states that the parts list is subject to change.
- Page 3 (toc): This page contains the table of contents for the parts catalog, listing various machine components and their corresponding page numbers in both English and Japanese.
- Page 4 (diagram): This page displays a diagram of various components and sub-assemblies of an industrial sewing machine, including covers, fasteners, and internal mechanisms, with numbered references for each part.
- Page 5 (parts_list): This page lists miscellaneous covers and related parts for an industrial sewing machine, including various screws, washers, plates, and gaskets, along with their part numbers and quantities.
- Page 6 (diagram): This page displays a diagram of machine components with reference numbers for various parts, including screws, brackets, and covers.
- Page 7 (parts_list): This page lists miscellaneous covers and related parts for sewing machines, including part numbers, descriptions, and quantities required, along with a threading chart for specific models.
- Page 8 (diagram): This page displays a diagram of various components of an industrial sewing machine, including screws, gaskets, covers, and other mechanical parts, each identified by a reference number.
- Page 9 (parts_list): This page lists miscellaneous covers and related parts for an industrial sewing machine, including part numbers, descriptions, and quantities required.
- Page 10 (diagram): This page displays a diagram of various components and sub-assemblies for an industrial sewing machine, including screws, brackets, and specialized parts, each identified by a reference number.
- Page 11 (parts_list): This page lists miscellaneous thread eyelets with their part numbers, descriptions, and quantities required.
- Page 12 (diagram): This page displays a diagram of various components of an industrial sewing machine, including pulleys, shafts, bearings, and housing parts, with reference numbers for each component.
- Page 13 (parts_list): This page lists miscellaneous crankshaft and bushings with their part numbers, descriptions, and quantities required.
- Page 14 (diagram): This page displays a diagram of various machine components, including linkages, shafts, screws, and brackets, with reference numbers for each part.
- Page 15 (parts_list): This page lists parts for the Needle Bar Driving Mechanism, including part numbers, descriptions, and quantities required.
- Page 16 (diagram): This page displays a diagram of various sewing machine parts, including linkages, shafts, screws, and brackets, with reference numbers for identification.
- Page 17 (parts_list): This page lists parts for the Needle Bar Driving Mechanism, including part numbers, descriptions, and quantities required.
- Page 18 (diagram): This page displays a diagram of various machine components, including screws, brackets, and linkages, with reference numbers for each part.
- Page 19 (parts_list): Parts list for the knife driving mechanism showing upper and lower knife components, screws, collars, and springs with part numbers, English and Japanese names, and quantities.
- Page 20 (diagram): This page displays a diagram of various sewing machine parts, including a presser foot assembly, tension components, and other miscellaneous parts, with reference numbers and some part numbers indicated.
- Page 21 (parts_list): This page lists parts for the Presser Foot Mechanism, including part numbers, descriptions, and quantities required.
- Page 22 (diagram): This page displays a diagram of various sewing machine parts, including presser feet, levers, springs, and screws, with reference numbers for each component.
- Page 23 (parts_list): This page lists parts for the Presser Foot Mechanism, including part numbers, descriptions, and quantities required.
- Page 24 (diagram): This page displays a diagram of various machine parts, including clamps, bearings, shafts, and fasteners, with reference numbers for identification.
- Page 25 (parts_list): This page lists parts for the Upper Looper Driving Mechanism, including part numbers, descriptions, and quantities required.
- Page 26 (diagram): This page displays a diagram of various machine components, including screws, brackets, shafts, and levers, with reference numbers for each part.
- Page 27 (parts_list): This page lists parts for the Lower Looper Driving Mechanism, including part numbers, descriptions, and quantities required.
- Page 29 (parts_list): This page lists parts for the FEED DRIVING CONTROL MECHANISM, including part numbers, descriptions, and quantities required.
- Page 31 (parts_list): This page lists parts for the FEED DRIVING MECHANISM, including part numbers, descriptions, and quantities required.
- Page 32 (diagram): This page displays a diagram of various components and sub-assemblies, including part numbers and reference indicators, for an industrial sewing machine.
- Page 33 (parts_list): This page lists parts for the Lubricating Mechanism, including oil pumps, screws, seals, tubes, filters, and gauges, with their corresponding part numbers and quantities.
- Page 34 (diagram): This page displays a diagram of various sewing machine parts for the CZ6000 model, including levers, feet, and covers, with corresponding reference numbers.
- Page 35 (parts_list): This page lists parts for the CZ6000 sewing machine, including presser foot components, screws, guides, and other accessories, with their corresponding part numbers and quantities.
- Page 36 (diagram): This page displays a diagram of various sewing machine parts, including a presser foot assembly, needle plate, and other components, with reference numbers for identification.
- Page 37 (parts_list): This page lists exclusive parts for the CZ6003 model, including part numbers, descriptions, and quantities required.
- Page 38 (diagram): This page displays a diagram of sewing machine parts for model CZ6016, including main components and extra parts, with reference numbers for each item.
- Page 39 (parts_list): This page lists exclusive parts for the CZ6016 model, including presser feet, screws, stitch plates, loopers, and knife holders, with their respective part numbers and quantities.
- Page 40 (diagram): This page displays a diagram of sewing machine parts, with numbered components and their corresponding part numbers and descriptions.
- Page 41 (parts_list): This page lists parts for the CZ6016-61 model, including presser foot components, stitch plates, screws, and other accessories, with their respective part numbers, descriptions, and quantities.
- Page 42 (diagram): This page displays a diagram of various sewing machine parts, including components labeled with reference numbers 1 through 31, and lists model numbers CZ6120, 6120-40, and 6125(1).
- Page 43 (parts_list): This page lists parts for CZ6120, 6120-40, and 6125 sewing machines, including part numbers, descriptions, and quantities required.
- Page 44 (diagram): This page displays diagrams of parts for models CZ6120, CZ6125, and CZ6120-40, with numbered components indicated.
- Page 45 (parts_list): This page lists parts for CZ6120, 6120-40, 6125 models, including presser feet, screws, washers, and guides, with their respective part numbers, descriptions, and quantities.
- Page 46 (diagram): This page displays a diagram of the K2 device, showing various components labeled with reference numbers for identification.
- Page 47 (parts_list): This page lists parts for the K2 DEVICE(1) with part numbers, descriptions, and quantities required.
- Page 48 (diagram): This page displays diagrams of K2 devices for models CZ6003/K2, CZ6020/K2, CZ6025/K2, and CZ6125/K2, detailing various components with reference numbers.
- Page 49 (parts_list): This page lists parts for K2 DEVICE(2) with part numbers, descriptions, and quantities required.
- Page 50 (diagram): This page displays diagrams for the B3 Device and CZ6003/B3 components, detailing various parts with reference numbers and descriptions.
- Page 51 (parts_list): This page lists parts for the B3 Device, including various screws, holders, plates, and other components with their corresponding part numbers and quantities.
- Page 52 (diagram): This page displays a diagram of the MT22 DEVICE(1) with numbered parts and their corresponding references.
- Page 53 (parts_list): This page lists parts for the MT22 DEVICE (1) with part numbers, descriptions, and quantities required.
- Page 54 (diagram): This page displays a diagram of the MT22 device, showing various components labeled with reference numbers and corresponding part numbers.
- Page 55 (parts_list): This page lists parts for MT22 DEVICE(2) with part numbers, descriptions, and quantities required.
- Page 56 (diagram): This page displays a diagram of various machine components and hardware, including brackets, screws, nuts, and other fasteners, with reference numbers for identification.
- Page 57 (parts_list): This page lists parts for the MISCELLANEOUS SUPPORTING BOARD, including part numbers, descriptions, and quantities required.
- Page 58 (diagram): This page displays a diagram of various machine components, including brackets, shafts, spools, and fasteners, with corresponding reference numbers for identification.
- Page 59 (parts_list): This page lists parts for the Thread Stand, including part numbers, descriptions, and quantities required.
- Page 60 (parts_list): This page lists various warning labels for the machine, including safety instructions, high voltage warnings, and caution labels for rotating parts and hot surfaces.
- Page 61 (unknown): This page contains a watermark and a website address at the bottom.